BMW X1 Xdrive 18 D

Welcome to your specialist for BMW X1 Xdrive 18 D drivetrain components. Here you will find an extensive selection of premium parts, including complete Drive shafts for BMW X1 Xdrive 18...

Products for BMW X1 Xdrive 18 D

9 products
1 - 9 of 9
Item no.:112649
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 541 mm
Item no.:143867
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 180 mm
  • Outer splines: 27
Item no.:241332
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 492 mm
  • Outer splines: 27
Item no.:240712
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 500 mm
  • Outer splines: 27
Item no.:442733
  • Position: Rear, Inner
  • Inner splines: 30
  • Seal diameter: 43,75 mm
  • Total length: 188 mm
  • Outer splines: 27
Item no.:654790
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 59 mm
  • Outer splines: 30
  • Joint diameter: 87 mm
Item no.:456637
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 62 mm
Item no.:659113
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 58,7 mm
  • Outer splines: 30
  • Total length: 132 mm

Drivetrain for BMW X1 Xdrive 18 D

Maintaining the drivetrain on a BMW X1 Xdrive 18 D is essential to preserve the driving dynamics and safety for which the brand is renowned. As a compact all-wheel-drive SUV, its components are exposed to substantial stress, particularly when driving in varying weather conditions and on rough road surfaces. The power transmission in this model is a complex system in which every component must interact seamlessly to deliver engine torque to the wheels without power loss or vibration. At CVJoint24, we understand the technical demands of this specific diesel engine variant and supply only parts that match or exceed original equipment standards.

When selecting spare parts for your BMW, never compromise on quality. An incorrect or sub-standard component can cause secondary damage to costlier assemblies such as the transfer box or differential. By focusing on specialist expertise in driveline systems, we offer a dedicated range tailored specifically to the BMW X1 Xdrive 18 D, ensuring your vehicle retains its original dynamics and dependability for many kilometres to come.

How the BMW X1 Xdrive 18 D drivetrain is built

The drivetrain of the BMW X1 Xdrive 18 D relies on BMW's intelligent xDrive all-wheel-drive system. This setup continuously distributes torque between the front and rear axles according to available grip and driving conditions. Consequently, the car features drive shafts on both the front and rear axles, along with a propeller shaft transferring power down the vehicle's centreline. Each drive shaft is fitted with both inner and outer CV joints, allowing the road wheels to steer and travel with the suspension while delivering constant power.

This particular layout places high demands on the centre bearings and universal joints. The propeller shaft centre bearing supports and stabilises the prop shaft, damping vibrations that would otherwise transfer into the bodyshell. Because the 18 D engine delivers generous torque from low revs, the inner CV joints endure high rotational forces under hard acceleration. Understanding this design is key to diagnosing why certain driveline parts wear faster than others, and why exact-fit precision is so critical on this model.

Common faults and symptoms

Several clear symptoms suggest the drivetrain on your BMW X1 Xdrive 18 D requires attention. One of the most typical signs is a clicking or knocking sound on full steering lock, which almost always indicates a worn outer CV joint. If you instead experience vehicle vibrations under acceleration, especially at motorway speeds, it often points to play in an inner constant velocity joint or an unbalanced drive shaft. Addressing these symptoms promptly is vital to prevent total driveline failure.

Split CV boots are another frequent issue. Once a boot tears, lubricating grease escapes whilst road grit and water penetrate the joint, causing rapid wear. Furthermore, a whining or rumbling sound from underneath the vehicle can indicate that the propeller shaft centre bearing is failing. By inspecting these parts regularly and listening out for unusual noises, you can avoid costly garage bills and ensure your BMW remains safe to drive.

Common parts to replace on the BMW X1 Xdrive 18 D

For the BMW X1 Xdrive 18 D, wear patterns dictate demand for specific driveline components. Our product range is curated to satisfy these exact requirements with high precision. Here are the core categories for your vehicle:

  • Drive shafts for BMW X1 Xdrive 18 D - Complete driveshafts for straightforward, reliable replacement in case of severe damage.
  • Outer CV joints for BMW X1 Xdrive 18 D - The most frequent wheel-side wear item, often causing clicking noises during turns.
  • Inner CV joints for BMW X1 Xdrive 18 D - Crucial for eliminating driveline judder and vibration under load.
  • Centre bearings for BMW X1 Xdrive 18 D - Essential to maintain prop shaft stability and smooth running.

By offering dedicated choices for both inner and outer CV joints, we ensure you can find the exact match for your car's specific chassis number and production date. This precision is especially vital for xDrive models, where mechanical tolerances are fine and driveline balance is critical to component longevity.

How to find the correct parts for your BMW X1 Xdrive 18 D

Navigate straight to the right sub-category for your BMW X1 Xdrive 18 D:

With several possible sources of driveline noise or play, it pays to start directly in the correct sub-category. Comparing the specific component categories for the BMW X1 Xdrive 18 D makes it easy to isolate issues with the drive shaft, CV joint or propeller shaft, directing you straight to the correct parts catalogue.

Identifying the correct spare part for a BMW X1 Xdrive 18 D can sometimes be complex, as technical specifications vary between model years and equipment levels. The most reliable way to browse our catalogue is to filter by vehicle make, model and engine variant. Selecting your vehicle filters the range automatically to display only parts that are compatible with your specific car, saving you time and avoiding incorrect orders.

Once you have filtered the products, we recommend double-checking any dimensions and technical details on the product page—such as spline count or overall length—for complete peace of mind. If you are unsure whether your repair requires a complete drive shaft or merely a replacement CV joint, our specialists are on hand to advise. We have mapped our catalogue thoroughly against BMW's model specifications for the Xdrive 18 D so you get the right part the first time.

Why buy from CVJoint24?

CVJoint24 is not merely an everyday motor factor; we are the international shop of a Swedish driveline specialist, operating with a central warehouse in Helsingborg, Sweden. When you order from us, you benefit from deep technical focus that general car parts stores rarely provide. We understand the engineering behind the BMW X1 Xdrive 18 D and know the exact tolerances its four-wheel-drive components require. Our fitment guarantee gives you full confidence that your order will fit your vehicle accurately.

We back our engineering expertise with dependable logistics, dispatching quickly across the EU to minimise your vehicle's downtime. Whether you are a professional garage or an experienced DIY mechanic, you receive precision-engineered components, reliable quality and support from knowledgeable driveline specialists. Choose the shop that puts your car's drivetrain first.

Frequently asked questions about drivetrain parts for BMW X1 Xdrive 18 D

What are the most common signs of a failing CV joint on my BMW X1 Xdrive 18 D?

The most common signs are a clicking noise when taking sharp turns (outer CV joint) or vibrations through the steering wheel and chassis during acceleration (inner CV joint).

Do all drive shafts for BMW X1 fit my Xdrive 18 D?

No, xDrive models use specific drive shafts that differ from two-wheel-drive versions. Always select your exact make, model and engine to ensure the correct fit.

How often should I inspect the CV boots on my BMW?

We recommend inspecting the CV boots at every routine service or seasonal tyre change. A split boot quickly leads to CV joint failure.

Do you offer a guaranteed fit for BMW drivetrain parts?

Yes, we guarantee a 100% correct fit when you select your vehicle's make, model and engine in our online shop.

What causes propeller shaft vibrations on an Xdrive 18 D?

These vibrations are often caused by a worn centre bearing or an imbalance in the prop shaft itself. Replacing the centre bearing in good time can prevent more costly damage.

How quickly can I receive my spare parts?

We offer fast delivery across Europe on most of our products, helping you get your BMW X1 Xdrive 18 D back on the road as quickly as possible.