BMW X1 Xdrive 20 D E84

Spare parts and drivetrain components for the BMW X1 Xdrive 20 D E84. Check fitment by make, model and engine before ordering.

Products for BMW X1 Xdrive 20 D E84

41 products
25 - 41 of 41
Item no.:396265
  • Position: Front
Item no.:696995
  • Position: Rear
Item no.:0675416
  • Position: Front
Item no.:640702
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 86 mm
  • Joint diameter: 99 mm
Item no.:141905
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 43,9 mm
  • Total length: 738 mm
  • Joint diameter: 82 mm
Item no.:0834431
  • Inner diameter: 30 mm
  • Bearing thickness: 13 mm
  • Hole spacing c/c: 160 mm
Item no.:626826
  • Position: Rear
  • Total length: 1,481 mm
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:142471
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 180 mm
  • Outer splines: 27
Item no.:248595
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 492 mm
  • Outer splines: 27
Item no.:641499
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 30
  • Seal diameter: 58,7 mm
  • Total length: 131 mm
Item no.:316967
  • Splines wheel side: 25
  • Total length: 26 mm
  • Thread size: M27x1.5
Showing 25–41 of 41 products

Drivetrain for BMW X1 Xdrive 20 D E84

The BMW X1 Xdrive 20 D E84 represents a unique combination of compact agility and BMW's legendary all-wheel-drive technology. As the owner of this model, you know that the drivetrain is the heart of the car's performance, especially when managing the torque from the punchy 20d diesel engine. The drivetrain in an E84 is engineered to provide optimum traction across varying driving conditions, but it also places high demands on every single component. From the front drive shafts to the central propeller shaft, every component must work in perfect harmony to preserve the driving dynamics that define the brand.

Here at CVJoint24, you will find a dedicated range tailored specifically for your BMW X1 Xdrive 20 D E84. We focus on offering parts that meet or exceed original equipment specifications, which is vital for a vehicle equipped with the xDrive system. Because power is continuously distributed between the front and rear axles, components such as CV joints and shafts endure complex loads. Choosing the correct spare parts is therefore not merely a matter of repair, but of preserving your vehicle's safety and mechanical integrity over time.

How the drivetrain is engineered on the BMW X1 Xdrive 20 D E84

The layout of the drivetrain on a BMW X1 Xdrive 20 D E84 is sophisticated. Power from the engine travels via the gearbox to a transfer box, which in turn directs torque to both the front and rear axles. This is handled by a propeller shaft running underneath the car. At each wheel, drive shafts then transmit power directly to the road. Because the E84 shares much of its architecture with contemporary BMW models, precision in the splines and mounting points is essential to eliminate vibrations and driveline noise.

The front suspension and axle assembly on xDrive models is particularly compact, meaning the front driveshafts operate at acute angles, especially on full lock. This places significant stress on the outer CV joints. The rear axle features a more traditional layout but often handles a larger share of the power during routine driving. The whole system is monitored by wheel speed sensors reading an ABS ring at each corner, which is critical for allowing the xDrive system to apportion power between wheels in milliseconds.

Common faults and symptoms

There are several distinct signs that a drivetrain component on your BMW X1 is beginning to fail. One of the most frequent symptoms is a clicking or knocking noise on full steering lock, which typically points to a worn outer CV joint. If you instead experience whole-car vibrations under acceleration, this can signal an imbalanced prop shaft or play within the inner constant velocity joints. Because the xDrive system is sensitive to rolling circumference differences and mechanical drag, a worn drivetrain component can easily be mistaken for an issue within the transfer box or 4WD system itself.

Another common issue on the E84 chassis is corrosion on the ABS reluctor rings. When an ABS ring cracks or corrodes, it sends erratic signals to the car's control units. This can illuminate the ABS warning light and cause unpredictable behaviour from both the all-wheel drive and Dynamic Stability Control (DSC). Identifying these faults early is crucial to prevent secondary damage to costly components such as the transfer box or differentials. Regular inspection of CV boots is equally important, as a small split quickly lets road grime enter and destroy the joint.

Common parts to replace on the BMW X1 Xdrive 20 D E84

For the BMW X1 Xdrive 20 D E84, we have identified the key components that most frequently require attention or replacement during the car's service life. Our catalogue currently includes 13 high-quality items across the primary drivetrain categories. Selecting the right part from the start saves both time and labour costs at the garage. Here are the core categories for this model:

  • Drive shafts: We stock multiple variants of drive shafts to cover both front and rear axle configurations.
  • Outer CV joints: We supply specific outer joints built to withstand the torque loads of the xDrive system.
  • Propeller shafts: With several available options, we cover the essential prop shaft requirements between the gearbox and axles.
  • ABS rings: We provide the correct ABS rings needed to maintain accurate sensor readings for your safety systems.

Replacing a complete drive shaft is often more cost-effective than rebuilding an old shaft with individual parts, particularly if multiple joints show signs of wear. Our components are selected for an exact fit on the E84 chassis, minimising the risk of post-installation vibrations.

How to find the correct parts for your BMW X1 Xdrive 20 D E84

Navigate directly to the relevant subcategory for the BMW X1 Xdrive 20 D E84:

On a vehicle with multiple drivetrain components, it pays to start in the precise category straight away. By comparing the specific sections for the BMW X1 Xdrive 20 D E84, you can readily differentiate between drive shaft, CV joint or prop shaft faults, allowing you to proceed to the exact parts that address your symptoms and fitment needs.

If you are unsure which side or specific part your car requires, do not hesitate to contact our customer support team. As specialists in the BMW X1 and its driveline, we can help identify the correct part based on your vehicle's specifications or symptoms. Our aim is to ensure you receive the right part first time.

Why buy from CVJoint24?

CVJoint24 is no ordinary parts retailer; we are the international shop of a Swedish driveline specialist, operating with dedicated warehouse facilities in Helsingborg, Sweden. Our focused expertise in vehicle drivetrains allows us to deliver parts engineered to exceptional standards of quality and dimensional accuracy. When you order parts for your BMW X1 Xdrive 20 D E84 from us, you can buy with confidence knowing every component has been vetted for an accurate fit when matched to your make, model and engine variant.

We understand how essential your vehicle is for day-to-day life, which is why we prioritise prompt dispatch and reliable delivery across the European Union. By combining deep technical know-how with a carefully curated inventory for your specific model, we ensure you always receive dependable car parts. Trust a driveline specialist who understands your BMW inside out – choose CVJoint24 for a smooth, reliable repair.

Frequently asked questions about BMW X1 Xdrive 20 D E84

How do I know if my BMW X1 E84 needs a new drive shaft?

The most common signs are vibrations under acceleration or a rhythmic knocking sound from the underside of the car. If the CV boot is split and grease has leaked out, there is a strong risk that the shaft has been damaged and requires replacement.

What are the symptoms of a failed outer CV joint on an xDrive model?

A worn outer CV joint usually produces a clicking noise when turning tightly, for instance while parking. On an all-wheel-drive BMW X1, this sound can be especially noticeable because the front axle is driven as well.

Why is the ABS warning light on in my BMW X1 Xdrive 20 D?

A very common issue on the E84 model is that the ABS ring on the drive shaft corrodes or cracks. This disrupts the sensor's signal and triggers the warning light, which can also affect the all-wheel-drive system.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

It depends on the extent of the damage. We supply both individual outer CV joints and complete drive shafts. If the car has covered high mileage, replacing the entire shaft is often more time-efficient and reliable.

Do all propeller shafts fit all BMW X1 models?

No, the propeller shaft varies depending on the engine variant, gearbox and whether the vehicle has xDrive. Always select your make, model and engine on cvjoint24.com to find the exact prop shaft for your 20d E84.

What does the fitment guarantee at cvjoint24.com mean?

Our fitment guarantee means that when you select your vehicle's make, model and engine and order the part we recommend, we guarantee it will fit your car. This gives you complete peace of mind when ordering.