BMW X1 Xdrive 20 D F48

Spare parts and drivetrain components for the BMW X1 Xdrive 20 D F48. Select your make, model and engine to ensure accurate fitment before ordering.

Products for BMW X1 Xdrive 20 D F48

23 products
1 - 23 of 23
Item no.:1119138
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Item no.:6154310
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 731 mm
  • Joint diameter: 76 mm
Item no.:0518990
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 31
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:2114271
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:445352
  • Position: Rear, Inner
  • Inner splines: 30
  • Seal diameter: 43,75 mm
  • Total length: 188 mm
  • Outer splines: 27
Item no.:451848
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 62 mm
Item no.:0157289
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 545 mm
Item no.:0144257
  • Splines gearbox side: 24
  • Splines wheel side: 31
  • Total length: 533 mm
Item no.:617129
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 731 mm
Item no.:0692003
  • Total length: 126 mm
Item no.:0986599
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:697095
  • Position: Rear
Item no.:2114273
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:610891
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 733 mm
Item no.:2174340
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 500 mm
Item no.:0587585
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 31
  • Outer diameter: 76 mm
Item no.:0428200
  • Position: Inner
  • Inner splines: 30
  • Outer diameter: 75 mm
  • Splines wheel side: 27
Item no.:2172179
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
Item no.:644494
  • Position: Rear, Inner
  • Inner splines: 30
  • Seal diameter: 43,7 mm
  • Total length: 187 mm
  • Outer splines: 27
Item no.:142614
  • Position: Front left, Inner
  • Inner splines: 28
  • Seal diameter: 33 mm
  • Outer splines: 28
Item no.:241722
  • Position: Front right, Inner
  • Inner splines: 28
  • Splines gearbox side: 35
  • Seal diameter: 44,5 mm
  • Total length: 126 mm
Item no.:0699541
  • Total length: 105 mm
Item no.:0934200
  • Inner diameter: 63 mm
  • Outer diameter: 75 mm

Drivetrain for BMW X1 Xdrive 20 D F48

The BMW X1 Xdrive 20 D F48 represents a modern generation of compact SUVs where efficiency meets performance. The drivetrain in this model is a sophisticated assembly that demands high-quality components to retain the driving dynamics expected of the marque. As specialists in the drivetrain, we understand the technical demands of the Xdrive system and how crucial it is that every component, from the drive shaft to the smallest CV boot, matches exact specifications. The F48 platform features a unique architecture compared to its predecessors, placing specific demands on spare part fitment and durability. Choosing the right parts not only safeguards your vehicle's reliability, but also ensures smooth, efficient power delivery under all driving conditions, from city traffic to rougher tracks.

How the drivetrain is engineered on the BMW X1 Xdrive 20 D F48

The drivetrain layout on the BMW X1 Xdrive 20 D F48 differs distinctly from older BMW models, as it is built on the UKL2 platform with a transverse engine. This means the torque from the punchy 20 D engine is delivered first to the front axle, and then directed via a bevel gear and propeller shaft to the rear axle through an intelligent Xdrive system. The system employs an electro-hydraulic multi-plate clutch to manage torque distribution between the front and rear wheels. As a result, the front drive shafts are subjected to substantial loads, particularly during acceleration and cornering. Understanding this layout is essential when choosing replacement parts for your BMW X1. Every part in the chain must interact flawlessly to prevent unnecessary wear on the transfer box and differentials.

Common faults and symptoms

When the drivetrain on a BMW X1 Xdrive 20 D F48 starts to wear, several clear symptoms typically emerge. One of the most frequent signs of a worn outer CV joint is a rhythmic clicking noise heard distinctly on full steering lock while driving. If you notice vibrations through the steering wheel or chassis under acceleration, it often points to a worn inner CV joint or an out-of-balance driveshaft. Another critical warning sign is grease leaking around the drive shaft fixings, which usually stems from a split CV boot. If dirt enters the constant velocity joint or the grease escapes, wear accelerates rapidly. Ignoring these signs can lead to secondary damage across the all-wheel-drive system, making early diagnosis and prompt repair well worthwhile.

Common replacement parts for the BMW X1 Xdrive 20 D F48

For the BMW X1 Xdrive 20 D F48 in particular, certain components see frequent demand based on the vehicle's design and usage. We have tailored our range to cover the most critical parts for this model. Key categories available in our shop include:

  • Drive shaft BMW X1 Xdrive 20 D F48 - We supply multiple variants to match different positions and factory specifications.
  • Outer CV joint BMW X1 Xdrive 20 D F48 - A precision part that is vital for steering response and smooth power transmission.

These parts are engineered to meet or exceed original equipment standards, which is vital for Xdrive models with narrow tolerances for rolling circumference and torque transfer. Replacing an entire drive shaft is often more cost-effective than rebuilding individual joints, giving you a complete, balanced unit fitted with fresh CV boots and grease.

How to find the right part for your BMW X1 Xdrive 20 D F48

Navigate directly to the relevant category for the BMW X1 Xdrive 20 D F48:

When troubleshooting driveline issues, selecting the correct section right away saves valuable time. By comparing the exact subcategories for the BMW X1 Xdrive 20 D F48, it is simple to isolate faults in the drive shaft, CV joint or prop shaft and proceed to the page that matches your symptoms and fitment.

Our database is structured to deliver accurate matches, minimising the risk of incorrect orders and unnecessary returns. If you need any assistance, our technical specialists are on hand to help guide you through our comprehensive range.

Why shop with CVJoint24?

CVJoint24 is the international webshop of a Swedish driveline specialist operating from our central warehouse in Helsingborg, Sweden. When sourcing parts for your BMW X1 Xdrive 20 D F48 from us, you benefit from specialist driveline expertise that general motor factors rarely match. We offer dependable fitment backed by rigorous vehicle data checks, allowing you to choose the correct components with complete peace of mind. With our commitment to quality products and prompt EU-wide shipping, we help you get your car back on the road with durable, reliable parts. We understand how crucial the right component is, and we aim to be your trusted partner for driveline maintenance. Choose an experienced specialist – rely on CVJoint24 for your next repair.

Frequently asked questions about drivetrain parts for BMW X1 Xdrive 20 D F48

How do I know if my BMW X1 Xdrive 20 D F48 needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises while driving. If you notice an imbalance that increases with speed, it is often the inner joint or the shaft itself that is damaged.

Is it difficult to replace the outer CV joint on an F48?

It requires mechanical knowledge and the right tools, as the BMW suspension is compact. We recommend following the workshop manual carefully to ensure correct torque tightening.

Why is an exact fit so important on xDrive models?

The xDrive system is sensitive to differences in rolling resistance and torque. Incorrect parts can cause tension in the drivetrain, which in the worst-case scenario can damage the transfer box.

Are the boot and grease included when I buy a CV joint from you?

Yes, when you purchase an outer CV joint for your BMW X1 from us, it is supplied as a complete kit with a CV boot, grease and the necessary fitting accessories.

How quickly can I get my parts delivered?

We dispatch all in-stock items promptly so you can get started with your repair as quickly as possible.

How do I make sure I find the right parts for my car?

Simply select your vehicle's make, model and engine variant in our store to view the exact parts that fit your BMW X1 Xdrive 20 D F48.