BMW X2 Xdrive 18 D F39

Spare parts and drivetrain components for the BMW X2 Xdrive 18 D F39. Select your make, model and engine to verify fitment before ordering.

Products for BMW X2 Xdrive 18 D F39

9 products
1 - 9 of 9
Item no.:1109502
  • Position: Front left
  • Total length: 535 mm
  • Splines gearbox side: 28
  • Splines wheel side: 31
Item no.:6116451
  • Position: Rear left, Rear right
  • Total length: 731 mm
  • Splines gearbox side: 27
  • Splines wheel side: 31
Item no.:0599316
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 28
  • Outer splines: 31
Item no.:2144856
  • Position: Front right
  • Total length: 499 mm
  • Splines gearbox side: 34
  • Splines wheel side: 31
Item no.:440394
  • Position: Rear, Inner
  • Inner splines: 30
  • Total length: 188 mm
  • Splines gearbox side: 27
Item no.:454652
  • Position: Rear, Outer
  • Total length: 62 mm
  • Splines gearbox side: 31
  • Splines wheel side: 30
Item no.:0551424
  • Position: Outer
  • Inner splines: 30
  • Outer diameter: 76 mm
  • Splines wheel side: 31
Item no.:0403805
  • Position: Inner
  • Inner splines: 30
  • Outer diameter: 75 mm
  • Splines wheel side: 27
Item no.:216799
  • Position: Front right
  • Total length: 500 mm
  • Splines gearbox side: 35
  • Splines wheel side: 31

Drivetrain for BMW X2 Xdrive 18 D F39

Welcome to our dedicated page for BMW X2 Xdrive 18 D F39 drivetrain components. This model, known under the chassis code F39, pairs BMW's renowned driving dynamics with the stability and safety of four-wheel drive. To preserve the performance and precise steering feel your car offered when new, fitting premium-quality components when natural wear sets in is essential. At CVJoint24, we are Swedish driveline specialists offering a carefully curated range of drivetrain parts for your specific model variant. Whether you require a complete drive shaft or a specific outer CV joint, we supply components that ensure optimal power transmission across all driving conditions, from everyday city traffic to challenging European winters. By focusing strictly on driveline expertise, we offer a level of technical confidence that generic car parts retailers often lack, particularly regarding the engineering nuances of BMW's Xdrive system.

How the drivetrain is engineered on the BMW X2 Xdrive 18 D F39

The BMW X2 Xdrive 18 D F39 is built on a modern, technologically advanced architecture where the Xdrive system is central to the car's dynamic character. Unlike traditional rear-wheel-drive BMW models, this vehicle uses a transverse engine layout, requiring a unique power transmission configuration. The system intelligently distributes torque between the front and rear axles via a sophisticated transfer box and robust drive shafts. The drivetrain is engineered specifically to cope with the strong torque produced by the 18 D diesel engine, placing high demands on drive shaft strength, balance and manufacturing precision. Every component, from the inner constant velocity joint mounted at the gearbox to the outer joint at the wheel hub, works in harmony to deliver the responsive, sporty handling expected of a BMW. Understanding this setup is the first step in pinpointing the exact spare part required when driveline issues emerge.

Common faults and symptoms

There are several clear warning signs indicating that the drivetrain on your BMW X2 Xdrive 18 D F39 is worn and requires attention. One of the most typical symptoms is a rhythmic clicking or knocking noise on full steering lock at low speeds, which almost invariably points to a worn or dry outer CV joint. If you experience vibrations through the steering wheel, seat or floorpan during acceleration, this often indicates unbalance or mechanical wear in an inner CV joint or the driveshaft assembly itself. Regularly inspecting the CV boots is vital; a split, cracked or leaking boot allows moisture and road grime into the precision bearings while letting vital lubricating grease escape. This swiftly leads to joint destruction. Ignoring these early warnings can cause costly secondary damage to other driveline components and, in the worst cases, complete breakdown on the road.

Common replacement parts for BMW X2 Xdrive 18 D F39

On the BMW X2 Xdrive 18 D F39, certain drivetrain components endure more stress than others due to the diesel engine's torque delivery and all-wheel drive setup. In our comprehensive range, you will find components precision-matched to this exact model variant and its technical specifications. We currently stock three drive shaft variants and a dedicated outer CV joint covering the most frequent replacement needs for the F39 chassis. Replacing the complete drive shaft provides a comprehensive, long-term repair that includes both inner and outer joints alongside factory-fitted CV boots, which is often the most time-efficient and cost-effective approach for extensive wear. However, if the issue is strictly confined to the wheel end—such as after a torn boot has compromised the outer assembly—replacing only the outer CV joint is often sufficient to restore smooth, quiet operation. We ensure all parts meet original specifications to maintain your vehicle's factory handling.

How to find the correct part for your BMW X2 Xdrive 18 D F39

Navigate directly to the appropriate section for the BMW X2 Xdrive 18 D F39:

When troubleshooting driveline issues, selecting the correct category first simplifies the process. By comparing the specific subcategories for the BMW X2 Xdrive 18 D F39, you can easily distinguish between drive shaft, CV joint or propeller shaft faults and proceed to the exact parts matching your car's symptoms and fitment.

Navigating straight to the relevant subcategory helps you avoid ordering incorrect components and gets your car back on the road promptly, backed by our fitment guarantee. We ensure you find the right part first time for a straightforward repair in the garage.

Why shop at CVJoint24

Choosing CVJoint24 means relying on a dedicated Swedish specialist with deep expertise in automotive drivetrains and power transmission systems. We recognise that your BMW X2 Xdrive 18 D F39 is a premium vehicle requiring replacement parts that deliver an exact fit and dependable durability. We back our products with a solid fitment guarantee and maintain specialist inventory depth across our categories. As specialists in parts for BMW, we ensure every component satisfies rigorous standards. Dispatched directly from our central Swedish warehouse in Helsingborg, our efficient logistics ensure rapid delivery across the European Union, keeping garage downtime to a minimum. We combine years of technical driveline knowledge with a user-friendly platform, making it straightforward to select the exact spare parts your vehicle requires.

Frequently Asked Questions about Drivetrain Parts for BMW X2 Xdrive 18 D F39

How do I know if my BMW X2 Xdrive 18 D F39 needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises coming from underneath the car. If the vibrations intensify with speed, it is often an indication of wear in the inner drive shaft joints.

Do all BMW X2 drive shafts fit my Xdrive 18 D?

No, it is vital to choose parts specifically designed for the Xdrive 18 D F39 variant, as drive shaft lengths and mountings can differ between engine variants and drive configurations.

What are the symptoms of a failing outer CV joint on an F39?

The classic symptom is a clicking or knocking noise that occurs when turning sharply, such as during tight parking manoeuvres or when turning into a junction.

Can I replace just the CV boot if the joint is still functioning?

Yes, if you detect the damaged boot early before dirt and moisture have penetrated to damage the internal bearings, replacing the CV boot and repacking it with fresh grease is often sufficient.

How does the fitment guarantee work for my BMW?

When you select your exact make, model and engine variant and choose a part shown as compatible, we guarantee it fits. In the unlikely event that it does not, we will assist you in exchanging it for the correct part.

Why should I choose a complete drive shaft instead of replacing just a CV joint?

Fitting a complete drive shaft is usually much more time-efficient and provides a more reliable repair, as all components—including CV boots and inner joints—are brand new and factory assembled.