BMW X3 Xdrive 28 I F25

Spare parts and drivetrain components for the BMW X3 Xdrive 28 I F25. Verify fitment by selecting your vehicle model and engine before ordering.

Products for BMW X3 Xdrive 28 I F25

35 products
1 - 24 of 35
Item no.:1166211
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 592 mm
  • Joint diameter: 86 mm
Item no.:0567244
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Thread size: M16X1,5
Item no.:0279861
  • Position: Front
  • Total length: 734 mm
  • Number of joints: 2
  • Outer diameter 2: 47 mm
  • Bolt circle diameter 2: 77 mm
Item no.:0255470
  • Total length: 1,280 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Number of centre bearings: 1
Item no.:6226889
  • Position: Rear
  • Total length: 1,280 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:346890
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 43,9 mm
  • Total length: 462 mm
  • Joint diameter: 85 mm
Item no.:142205
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 170 mm
  • Outer splines: 27
Item no.:7301568
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 881 mm
  • Joint diameter: 86 mm
Item no.:4120135
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 769 mm
  • Joint diameter: 88 mm
Item no.:651085
  • Position: Rear, Outer
  • Splines gearbox side: 30
  • Splines wheel side: 25
  • Total length: 135 mm
Item no.:145110
  • Position: Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Joint diameter: 81 mm
  • Outer splines: 27
Item no.:0802517
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:412507
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 770 mm
  • Joint diameter: 87,8 mm
Item no.:511015
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 825 mm
  • Joint diameter: 87,8 mm
Item no.:612463
  • Position: Rear
  • Splines gearbox side: 32
  • Splines wheel side: 30
Item no.:515115
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 825 mm
  • Joint diameter: 88 mm
Item no.:141782
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 43,95 mm
  • Total length: 171 mm
  • Outer splines: 27
Item no.:245893
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 29,97 mm
  • Total length: 461,5 mm
  • Outer splines: 27
Item no.:3532350
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Thread size: M16X1,5
Item no.:394686
  • Position: Front
Item no.:0996745
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:0614810
  • Total length: 114 mm
Item no.:691950
  • Position: Rear
Showing 1–24 of 35 products

Drivetrain for BMW X3 Xdrive 28 I F25

The BMW X3 Xdrive 28 I F25 represents an important era for BMW's mid-size SUV segment, where the F25 generation introduced an enhanced level of technology and refinement. The drivetrain in this specific model variant is engineered to handle the responsive power of the 28i engine, placing high demands on every individual component in the power transmission system. As the owner of such a premium vehicle, you know that driving pleasure and safety go hand in hand with properly functioning mechanics. At CVJoint24, we are dedicated to being the leading specialist source for drivetrain components for this exact model. By offering a comprehensive range tailored to the unique demands of the xDrive system, we help you maintain your car's original performance. Understanding the importance of precise fitment and material quality is the core of our business, and we strive to ensure every customer finds exactly what they need to keep their BMW in peak condition for many years to come.

How the drivetrain is configured on the BMW X3 Xdrive 28 I F25

The layout of the drivetrain on a BMW X3 Xdrive 28 I F25 is a testament to advanced German engineering. The system begins at the engine and gearbox, where power is routed into a transfer case that forms the heart of the xDrive intelligent all-wheel-drive system. From here, torque is distributed via a front and a rear propeller shaft. These shafts are fitted with universal joints and often a centre bearing to minimise vibrations and accommodate angular changes during driving. Further out towards the wheels, we find the drive shafts, which are equipped with both inner and outer CV joints. The outer joints are particularly stressed, as they must manage both power transmission and substantial steering angles simultaneously. The entire setup is integrated with the car's dynamic stability control to shift power instantly where it is needed most. This complexity means that every part, from the smallest CV boot to the complete driveshaft, must work in perfect harmony to prevent imbalance or unnecessary wear on more expensive components in the system.

Common faults and symptoms

Common drivetrain faults and symptoms on a BMW X3 Xdrive 28 I F25 can often be diagnosed by paying close attention to noises and vibrations while driving. A classic sign of wear in an outer CV joint is a rhythmic clicking or knocking noise that is most noticeable during sharp turns at low speeds. If vibrations instead develop at higher speeds or under heavy acceleration, this can point to problems with the propeller shaft or its centre bearing. It is also typical for vibrations felt through the seat or floor to originate from the rear section of the drivetrain, whereas vibrations in the steering wheel often indicate the front axle. Another symptom to watch for is jerky behaviour when the all-wheel drive engages, which may indicate that tyre rolling circumferences differ excessively or that a constant velocity joint is beginning to bind. By acting early when these symptoms emerge, you can often avoid costly repairs to the transfer case, which is one of the most sensitive parts of the xDrive system.

Common parts to replace on the BMW X3 Xdrive 28 I F25

When it comes to common parts to replace on the BMW X3 Xdrive 28 I F25, we have identified several key components that frequently require attention after substantial mileage. Our range includes dedicated items designed specifically for this model. Here are the categories most relevant to your vehicle:

  • Drive shaft BMW X3 Xdrive 28 I F25 – We offer several options to cover both front and rear axles as well as different fitting positions.
  • Propeller shaft BMW X3 Xdrive 28 I F25 – With multiple choices available, we supply the correct prop shaft regardless of your car's exact specification.
  • Outer CV joint BMW X3 Xdrive 28 I F25 – A vital component for steering and power transmission that often requires replacement if the CV boot has split.

These parts are manufactured to meet or exceed original specifications, ensuring dependable durability and maintained ride comfort. Choosing the right category is the first step towards a successful repair, and our clearly structured range makes it straightforward to navigate to the exact product group for your BMW.

How to find the right part for your BMW X3 Xdrive 28 I F25

Proceed to the correct section for your BMW X3 Xdrive 28 I F25:

On a vehicle with several potential drivetrain issues, starting directly in the right category is essential. By comparing the exact component sections for the BMW X3 Xdrive 28 I F25, it becomes much easier to distinguish between faults in a drive shaft, CV joint or propeller shaft, allowing you to navigate straight to the page that best matches your symptoms and fitment needs.

Identifying the exact component that fits your specific BMW X3 Xdrive 28 I F25 can be tricky, as variations may occur depending on production month and equipment level. The most reliable method is to select your vehicle's exact make, model and engine variant in our store selector. This immediately filters out the relevant car parts for your vehicle. However, it is also important to consider the physical specifications of the part you are replacing. For instance, check whether you need a component for the left or right side, as these frequently differ in length or mounting design. For propeller shafts, measuring the overall length of your existing shaft is recommended to be completely certain, as the manufacturer may have introduced revisions during the model's production run. If you are ever unsure, we are on hand to assist. Our database under All car makes is linked to official parts catalogues, enabling us to match OEM numbers directly to our components so you receive the right part first time.

Why buy from CVJoint24

When you choose to order from CVJoint24, you are buying from a Swedish driveline specialist. We understand the technical intricacies of BMW power transmission systems and supply only parts engineered to cope with demanding European road conditions. Our commitment to you always includes correct components and an accurate fitment guarantee that provides total peace of mind; in the unlikely event that a part does not fit despite selecting the correct vehicle details, we resolve it promptly. We hold stock in Sweden and ship across the EU, helping you get your car back on the road without unnecessary workshop delays. Our customer service team consists of knowledgeable specialists ready to guide you through technical queries and help you identify the right components for your BMW. Shopping with us means you receive not just quality spare parts, but also access to genuine expertise focused on keeping your car's drivetrain running smoothly for years to come.

Frequently Asked Questions about Drivetrain for BMW X3 Xdrive 28 I F25

How do I know if my BMW X3 Xdrive 28 I F25 needs a new drive shaft?

Common signs include vibrations under acceleration, unusual noises from the wheel arches, or visible damage to the CV boots where grease has leaked out.

Does the same CV joint fit both the right and left side on my BMW X3?

The outer CV joints are often identical, but it is important to check against your exact make, model and engine variant, as the complete drive shafts often differ in length.

What is included when I buy an outer CV joint kit from you?

Our CV joint kits are normally supplied complete with the joint, CV boot, grease, clamps and fitting accessories such as a bolt or nut.

Why does my BMW X3 vibrate during acceleration?

This is frequently caused by wear in the propeller shaft centre bearing or imbalance in the prop shaft itself, but it can also stem from worn inner CV joints.

Can I replace just the CV boot if the joint is still working?

Yes, if you catch a split or damaged boot early before dirt and moisture have penetrated the CV joint, you can save money by replacing just the boot.

How quickly are parts delivered for my BMW X3 Xdrive 28 I F25?

We offer fast delivery for most items in stock, provided your order is placed before our cut-off time on working days.