BMW X3 Xdrive M40 D G01

Spare parts and drivetrain components for BMW X3 Xdrive M40 D G01. Verify fitment by selecting your make, model and engine before ordering.

Products for BMW X3 Xdrive M40 D G01

17 products
1 - 17 of 17
Item no.:1155969
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 575 mm
Item no.:2178295
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 875 mm
Item no.:0588931
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Thread size: M16X1,5
Item no.:329938
  • Position: Front
  • Total length: 809 mm
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 77 mm
Item no.:1187964
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 574 mm
Item no.:2194924
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 872 mm
Item no.:3505035
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 27
  • Thread size: M16X1,5
Item no.:2138740
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 875 mm
Item no.:1191139
  • Position: Front left
Item no.:149639
  • Position: Front left, Inner
  • Inner splines: 33
  • Seal diameter: 43,95 mm
  • Total length: 178 mm
  • Outer splines: 27
Item no.:242277
  • Position: Front right, Inner
  • Inner splines: 33
  • Splines gearbox side: 27
  • Seal diameter: 43,95 mm
  • Total length: 479 mm
Item no.:395154
  • Position: Front
Item no.:0910543
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:696996
  • Position: Rear

Drivetrain for BMW X3 Xdrive M40 D G01

The BMW X3 Xdrive M40 D G01 represents the pinnacle of diesel performance in the X3 range. With an engine delivering massive torque, extreme demands are placed on the vehicle's drivetrain. Every component, from the gearbox out to the wheel hubs, must work in perfect harmony to maintain the driving dynamics for which BMW is renowned. As specialists in drivetrain components, we understand that an M-performance model like the G01 M40D requires parts that do not just fit physically, but can also withstand the mechanical stress of spirited driving and hard acceleration.

Maintaining the drivetrain on a BMW X3 is essential for both safety and comfort. Because the xDrive system is active and splits power dynamically between the front and rear axles, a defect in a single component can impair the efficiency of the entire system. We supply the dedicated parts required for your BMW to keep putting power down on the tarmac in a controlled manner. By selecting the correct spare parts, you ensure that the car's advanced stability and all-wheel-drive systems operate optimally under all weather conditions.

How the drivetrain is engineered on the BMW X3 Xdrive M40 D G01

The drivetrain on a BMW X3 Xdrive M40 D G01 is a sophisticated setup built around the xDrive all-wheel-drive system. Power from the straight-six diesel engine is directed through the gearbox to a transfer box, which distributes torque to both the front and rear axles. This means the car uses four drive shafts – two at the front and two at the rear. Each drive shaft is fitted with CV joints that allow the wheels to travel vertically with the suspension and steer (on the front axle) while transmitting power seamlessly.

The G01 platform incorporates lightweight materials and high-tensile steel to balance strength against weight. The outer CV joints are subjected to severe loads, as they must accommodate wide angles at full steering lock while handling peak engine torque. Inner CV joints operate at tighter angles but absorb the axial plunge generated as the car's suspension compresses and rebounds. On a BMW X3 M40D, precision in these components is critical to prevent vibration and power loss through the intelligent all-wheel-drive setup.

Common faults and symptoms

Despite BMW's exceptional engineering, the drivetrain is subject to natural wear and tear, particularly on high-torque variants like the M40D. One of the most typical signs of a worn outer CV joint on a BMW X3 Xdrive M40 D G01 is a rhythmic clicking noise heard when turning sharply at low speeds. This is frequently caused by a split CV boot, which allows dirt to ingress and grease to escape, rapidly destroying the joint's bearing surfaces.

Vibration through the chassis under acceleration is another frequent symptom, often traced back to a failing inner CV joint or an unbalanced driveshaft. If you notice shaking at specific speeds or under load, the drive shafts should be inspected without delay. Another sign to look out for is grease splattered across the inside of the alloy wheel or the wheel arch liner, indicating a split boot. Addressing these issues promptly is cost-effective, as a failing CV joint left unattended can ultimately result in complete failure, leaving the vehicle stranded.

Common replacement parts for the BMW X3 Xdrive M40 D G01

When it is time to service or repair your BMW X3, it pays to know which components are most commonly replaced. For the G01 model, we see strong demand for complete drive shafts and outer CV joints. Here are the most relevant categories for your vehicle:

  • Drive shafts for BMW X3 Xdrive M40 D G01 – We currently stock several options tailored to specific axle positions on the vehicle.
  • Outer CV joints for BMW X3 Xdrive M40 D G01 – We offer 2 high-quality options for replacing worn constant velocity joints.

Replacing an entire drive shaft is often an efficient solution, providing both inner and outer joints alongside a fresh shaft in one assembly, which minimises workshop labour and prevents future faults. If the wear is isolated to the outer end, replacing just the outer CV joint may suffice. Whichever route you take, it is advisable to inspect adjacent components such as wheel bearings and suspension links while the drivetrain is disassembled.

How to find the right part for your BMW X3 Xdrive M40 D G01

Navigate directly to the appropriate section for your BMW X3 Xdrive M40 D G01:

On a vehicle with several possible drivetrain issues, it is sensible to start in the correct category straight away. By exploring the specific subcategories for the BMW X3 Xdrive M40 D G01, you can more easily distinguish between drive shaft, CV joint or propeller shaft faults and continue to the page that best matches your symptoms and fitment needs.

Selecting replacement components for modern vehicles like a BMW can prove challenging due to complex technical specifications. To ensure complete confidence in your order, you can filter our catalogue by choosing your vehicle's make, model and engine. This narrows down the range to the exact parts engineered for your specific BMW X3 Xdrive M40 D G01, removing guesswork surrounding spline counts, overall lengths and mounting dimensions.

If you are still unsure, our expert team is on hand to guide you. We always recommend comparing your original part with the new replacement before beginning installation. Backed by our deep product knowledge, we ensure that the parts listed for your model meet the precise tolerances required by the xDrive system. With our fitment guarantee, you can rest assured that the component you order is the correct part for your car, saving both time and frustration in the garage.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, with our central warehouse located in Helsingborg, Sweden. Unlike general car parts retailers, we focus exclusively on driveline and power-transmission systems. For an owner of a BMW X3 Xdrive M40 D G01, this means you gain access to specialist expertise that understands your car's exact mechanical demands. We stock parts manufactured to rigorous standards of precision and durability, matching the needs of premium vehicles. Our aim is to deliver the market's best combination of quality, price and technical knowledge across the European Union.

When you order from us, you receive a reliable, complete solution. We dispatch promptly across the EU to minimise your car's downtime in the workshop. Furthermore, all our orders are supported by a fitment guarantee, meaning we take full responsibility for vehicle compatibility when parts are selected through our catalogue filters. Choosing CVJoint24 means partnering with a dedicated driveline specialist equipped to help you keep your BMW performing at its very best year after year.

Frequently Asked Questions about Drivetrain for BMW X3 Xdrive M40 D G01

Which drivetrain parts are most commonly replaced on a BMW X3 M40D?

The most common parts are outer CV joints and complete drive shafts, particularly on the front axle where they are subjected to both steering angles and power transfer from the xDrive system.

How do I know the drive shaft will fit my BMW X3 G01?

The most reliable method is to select your vehicle's exact make, model and engine variant in our store. We list 4 specific drive shafts for the M40D G01 to ensure an exact fit.

What causes a clicking noise when turning in my BMW?

A clicking noise on full steering lock is a classic symptom of a worn outer CV joint. This is usually caused by dirt and moisture entering the joint through a split or damaged CV boot.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, if the rest of the shaft is undamaged and the wear is confined to the outer joint, you can replace that component alone. We offer 2 different outer CV joints for your model.

Does a faulty drive shaft affect the xDrive system?

Yes, xDrive distributes torque electronically. If a drive shaft is defective or causes vibrations, it can disrupt the system's ability to optimise grip and, in the worst cases, lead to consequential damage in the transfer box.

How quickly do you deliver parts for the BMW X3?

We offer fast delivery across Europe on in-stock items, meaning you will receive your new drive shaft or CV joint promptly after placing your order.