BMW X4 Xdrive 20 I F26

Spare parts and drivetrain components for BMW X4 Xdrive 20 I F26. Confirm fitment by make, model and engine before ordering.

Products for BMW X4 Xdrive 20 I F26

30 products
1 - 24 of 30
Item no.:1140678
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 592 mm
  • Joint diameter: 86 mm
Item no.:2165458
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 825 mm
  • Joint diameter: 87,8 mm
Item no.:4113250
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 769 mm
  • Joint diameter: 88 mm
Item no.:0502940
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Thread size: M16X1,5
Item no.:0200282
  • Position: Front
  • Total length: 734 mm
  • Number of joints: 2
  • Outer diameter 2: 47 mm
  • Bolt circle diameter 2: 77 mm
Item no.:0282237
  • Total length: 1,280 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Number of centre bearings: 1
Item no.:6214012
  • Position: Rear
  • Total length: 1,280 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:345380
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 43,9 mm
  • Total length: 462 mm
  • Joint diameter: 85 mm
Item no.:147310
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 170 mm
  • Outer splines: 27
Item no.:657955
  • Position: Rear, Outer
  • Splines gearbox side: 30
  • Splines wheel side: 25
  • Total length: 135 mm
Item no.:2128019
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 881 mm
  • Joint diameter: 86 mm
Item no.:149759
  • Position: Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Joint diameter: 81 mm
  • Outer splines: 27
Item no.:0891968
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:418255
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 770 mm
  • Joint diameter: 87,8 mm
Item no.:511000
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 825 mm
  • Joint diameter: 88 mm
Item no.:148930
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 43,95 mm
  • Total length: 171 mm
  • Outer splines: 27
Item no.:241934
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 29,97 mm
  • Total length: 461,5 mm
  • Outer splines: 27
Item no.:649337
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 43,9 mm
  • Total length: 147 mm
  • Outer splines: 27
Item no.:3545553
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Thread size: M16X1,5
Item no.:0970561
  • Inner diameter: 43 mm
  • Outer diameter: 90 mm
Item no.:396862
  • Position: Front
Item no.:0934211
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:0617629
  • Total length: 114 mm
Showing 1–24 of 30 products

Drivetrain for BMW X4 Xdrive 20 I F26

The BMW X4 Xdrive 20 I F26 combines sporty performance with the sure-footed stability of four-wheel drive, placing exacting demands on every drivetrain component. To preserve the driving dynamics BMW is renowned for, every part of the power transmission system must remain in peak condition. The drivetrain on this model is complex, relying on multiple interacting components that must work in complete harmony. As driveline specialists, we at CVJoint24 offer a comprehensive range for your BMW X4. Whether you need to replace a worn drive shaft or a propeller shaft, we supply the correct parts to keep power flowing to the road efficiently and reliably. Choosing premium-quality components is essential for long-term durability and the seamless operation of your xDrive system, especially given the distinct torque delivery of the 20i engine in the F26 chassis.

How the drivetrain works on the BMW X4 Xdrive 20 I F26

The BMW X4 Xdrive 20 I F26 drivetrain is engineered around BMW's intelligent xDrive all-wheel-drive system. Output from the longitudinally mounted engine travels through the gearbox into a transfer case. From there, torque is distributed between the front and rear axles via two separate propeller shafts. At the road wheels, the drive shafts take over, transferring power through inner and outer CV joints. This setup enables dynamic torque distribution that adapts continuously to road conditions, but it also introduces multiple moving parts that are subject to wear. Every item, from the smallest outer constant velocity joint to the main prop shaft and its centre bearing, plays a vital role in overall vehicle balance and traction. Understanding this layout is key to catching potential faults early, before they trigger expensive repairs or leave the xDrive system immobilised.

Common faults and symptoms

There are several distinct signs that the drivetrain on your BMW X4 Xdrive 20 I F26 requires attention. One of the most typical symptoms is a clicking or knocking sound from the front end while cornering tightly, which usually points to a failing outer CV joint. Vibrations through the vehicle body under acceleration or at cruising speeds often indicate an unbalanced or worn propeller shaft, or failing universal joints. It is equally important to inspect the rubber drive shaft boots for grease leaks; if a boot splits, lubricating grease escapes while grit enters, rapidly ruining the CV joint. If you notice jerky power delivery from the all-wheel drive or abnormal noises from underneath, inspect your drivetrain components right away. Ignoring these warnings can lead to total driveline failure, potentially leaving you stranded and inflicting severe damage on the transfer box.

Common replacement parts for the BMW X4 Xdrive 20 I F26

Given the weight and driveline complexity of the BMW X4 Xdrive 20 I F26, specific components experience elevated wear. In our catalogue you will find multiple options for a driveshaft for BMW X4 Xdrive 20 I F26, covering both front and rear axle positions to ensure complete coverage. For longitudinal power transfer, we stock several variants of the propeller shaft for BMW X4 Xdrive 20 I F26, engineered to handle the engine's torque loads. We also supply 1 specific outer CV joint for BMW X4 Xdrive 20 I F26, crucial for maintaining smooth steering and reliable power transfer at the hub. Fitting the correct part is vital to avoid secondary damage to other sensitive drivetrain units. Replacing worn components promptly safeguards original handling characteristics and prolongs the service life of the entire transmission system.

Finding the right parts for your BMW X4 Xdrive 20 I F26

Go directly to the relevant parts section for your BMW X4 Xdrive 20 I F26:

When troubleshooting a vehicle with several possible driveline issues, starting in the right section saves time. By comparing the specific product groups for the BMW X4 Xdrive 20 I F26, you can readily distinguish between drive shaft, CV joint or propeller shaft problems and navigate to the category matching your symptoms and specifications.

Pinpointing the exact component for a BMW X4 Xdrive 20 I F26 can be challenging due to distinct technical variations across the F26 platform. We always recommend selecting your exact make, model and engine variant to filter parts guaranteed to fit your car. As a dedicated specialist in BMW driveline components, we ensure you find accurate technical data immediately. These are the main categories available for your vehicle:

  • Drive shafts for BMW X4 Xdrive 20 I F26
  • Outer CV joints for BMW X4 Xdrive 20 I F26
  • Propeller shafts for BMW X4 Xdrive 20 I F26
Choosing the right subcategory allows you to find your required component quickly. Our catalogue is tailored to deliver precise matches, eliminating ordering errors and saving valuable time during repairs.

Why shop with CVJoint24

CVJoint24 is the international webshop of a Swedish driveline and power transmission specialist, with central warehousing in Helsingborg, Sweden. We understand the paramount importance of precise fitment and superior build quality, especially for premium vehicles like the BMW X4. Backed by our fitment guarantee, you can order with absolute confidence that every part will operate smoothly in your vehicle. We stock a comprehensive, specialist inventory that goes far beyond general motor factors, ensuring we have the exact components required for your F26. Shop with us for direct access to genuine technical expertise, reliable quality and dependable service across the European Union. We are committed to helping you choose the right part first time and delivering it promptly to your door.

Frequently asked questions about drivetrain parts for BMW X4 xDrive20i F26

How do I know if the propeller shaft is failing on my BMW X4?

The most common signs of a failing propeller shaft are vibrations through the body that increase with speed, or a knocking noise from beneath the car when accelerating. This is often caused by wear in universal joints or the centre bearing.

Why is there a clicking noise when turning in my BMW X4 xDrive20i?

A clicking noise on full steering lock is a classic symptom of a worn outer CV joint. As the joint wears, play develops, producing the noise when power is transmitted at an angle.

Do all drive shafts fit every BMW X4 model?

No, drive shafts are specific to the model, engine variant and model year. For the BMW X4 xDrive20i F26, an exact match is required to ensure the correct length and splines.

What is included when I buy an outer CV joint from you?

Our outer CV joints are supplied as complete kits containing the joint itself, CV boot, grease, clamps and fitting hardware to make replacement straightforward and reliable.

How often should I check the drivetrain on my BMW X4?

We recommend a visual inspection of the boots and joints at every service or wheel change. Catching a split CV boot early can save you the cost of replacing the entire CV joint.

Can I replace just one section of the prop shaft on my F26?

Yes, our range often includes both front and rear propeller shaft sections separately, meaning you only need to replace the section that is actually worn.