BMW X4 Xdrive 30 D G02

Spare parts and drivetrain components for BMW X4 Xdrive 30 D G02. Select your make, model and engine to ensure correct fitment before ordering.

Products for BMW X4 Xdrive 30 D G02

22 products
1 - 22 of 22
Item no.:1134319
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 575 mm
Item no.:2167764
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 875 mm
Item no.:0558408
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 37
  • Thread size: M16X1,5
Item no.:347051
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 43,9 mm
  • Total length: 462 mm
  • Joint diameter: 85 mm
Item no.:140817
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 170 mm
  • Outer splines: 27
Item no.:325138
  • Position: Front
  • Total length: 809 mm
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 77 mm
Item no.:1190329
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 574 mm
Item no.:2136814
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 872 mm
Item no.:3583021
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 27
  • Thread size: M16X1,5
Item no.:1106195
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 574 mm
Item no.:2117814
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 875 mm
Item no.:2148123
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 875 mm
Item no.:1144820
  • Position: Front left
Item no.:145524
  • Position: Front left, Inner
  • Inner splines: 33
  • Seal diameter: 43,95 mm
  • Total length: 178 mm
  • Outer splines: 27
Item no.:246947
  • Position: Front right, Inner
  • Inner splines: 33
  • Splines gearbox side: 27
  • Seal diameter: 43,95 mm
  • Total length: 479 mm
Item no.:396350
  • Position: Front
Item no.:0956391
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:699465
  • Position: Rear

Drivetrain for BMW X4 Xdrive 30 D G02

The BMW X4 Xdrive 30 D G02 represents a sophisticated blend of performance and engineering, where the drivetrain plays a pivotal role in the car's dynamic handling. As a Sports Activity Coupé fitted with the intelligent xDrive all-wheel-drive system, the powertrain components are subjected to substantial stress, especially with the high-torque 30 D engine delivering rapid acceleration. Maintaining the drivetrain is essential to preserve the car's balance, safety, and that hallmark driving feel. Here at CVJoint24, you will find the exact parts required to keep your BMW X4 in peak condition. We focus on supplying components that match or exceed original specifications, ensuring every part interacts seamlessly with the vehicle's sophisticated chassis technology and electronic stability control.

How the drivetrain is engineered on the BMW X4 Xdrive 30 D G02

The drivetrain of the BMW X4 Xdrive 30 D G02 is an intricate setup that efficiently channels power from the six-cylinder diesel engine to all four wheels. The system relies on a central transfer box that rapidly distributes torque between the front and rear axles via propeller shafts, adapting instantly to road conditions and driving dynamics. At the wheels, drive shafts are fitted with inner and outer CV joints. These constant velocity joints are engineering marvels, allowing the wheels to travel vertically with the suspension and steer while transferring power smoothly without loss. For the G02 generation, BMW refined these components to cope with greater torque outputs and deliver a quieter ride inside the cabin. Every element, from the smallest CV boot to the complete drive shaft, is precision-engineered to withstand the specific loads generated by this high-performance model, making the choice of the correct spare part critical.

Common faults and symptoms

Despite BMW's exacting standards, drivetrain components inevitably experience wear over time, particularly under enthusiastic driving or when hauling heavy loads. One of the clearest indicators of a failing outer CV joint on a BMW X4 Xdrive 30 D G02 is a distinct clicking or knocking noise when turning sharply at low speeds. If you detect vibrations through the steering wheel or seat base during acceleration, this often points to imbalance or internal wear within a drive shaft. Another critical symptom is grease leaking from the drive shaft boots; if a CV boot splits, grit and moisture penetrate while the vital lubricant escapes, leading rapidly to complete joint failure. It is therefore vital to carry out regular visual inspections to spot cracks early, avoiding costly collateral damage to other transmission components or the xDrive system.

Commonly replaced parts for the BMW X4 Xdrive 30 D G02

For this specific model, certain components experience higher rates of wear. In our range for the BMW X4 Xdrive 30 D G02, you will find the core parts required to restore your vehicle's performance. We have organised our catalogue so you can quickly locate what you need:

  • Drive shafts for BMW X4 Xdrive 30 D G02 – We supply complete driveshafts ready for installation, saving valuable time in the garage.
  • Outer CV joints for BMW X4 Xdrive 30 D G02 – A crucial part for steering and power delivery on the front axle, often requiring replacement if the boot has been damaged.
Replacing a complete drive shaft is frequently the more cost-effective option compared to rebuilding individual worn parts, as you receive factory-assembled new joints and boots in one unit. This minimises the risk of recurring issues and ensures the entire assembly operates with the precision required by the sensitive all-wheel-drive sensors.

How to find the right part for your BMW X4 Xdrive 30 D G02

Navigate directly to the relevant subcategory for your BMW X4 Xdrive 30 D G02:

When troubleshooting drivetrain issues, starting in the right category saves time. By comparing the exact sections for the BMW X4 Xdrive 30 D G02, it is straightforward to differentiate between problems with a drive shaft, CV joint, or prop shaft, directing you straight to the page that matches your symptoms and fitment.

Selecting the correct spare parts for a modern BMW can prove challenging given the numerous technical variations between model years, engine options, and trim specifications. To make your selection straightforward and accurate, simply select your car's make, model, and engine variant in our store selector. Filtering by your exact vehicle configuration ensures you only view parts verified for your car. This is vital for items such as driveshafts, where overall length, spline tooth counts, and mounting flanges can differ within the same model generation. We provide an intuitive layout allowing you to navigate straight to the right category for your BMW, saving time and preventing misorders during repairs.

Why choose CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching high-grade parts across the European Union directly from our central warehouse in Helsingborg, Sweden. We unite deep technical know-how with a comprehensive selection of driveline products to provide an effortless ordering experience. When purchasing from us, you benefit from our precise fitment assurance, giving you complete confidence that every replacement component will fit and perform as intended. We understand the urgency of getting your car back on the road, dispatching your order swiftly across the EU. Built on durability, engineering precision, and dependable support, we are the trusted source for BMW owners seeking superior drivetrain components without compromise.

Frequently asked questions about drivetrain parts for BMW X4 Xdrive 30 D G02

How do I know if my BMW X4 Xdrive 30 D needs a new drive shaft?

The most common symptoms are vibrations through the car during acceleration or constant vibrations at specific speeds. If you notice an imbalance that does not disappear after wheel balancing, the drive shaft is a likely cause.

What noises indicate a worn outer CV joint on my BMW X4?

A clicking or knocking sound that speeds up with the rotation of the wheels when turning sharply is the classic sign that the outer CV joint is worn and needs replacing.

Are a CV boot and grease included when I buy an outer CV joint from you?

Yes, our outer CV joints are supplied as complete kits containing the joint itself, a model-specific CV boot, high-grade grease, and the required clips and mounting hardware.

Can I use the same drive shaft on both sides at the front of my X4 G02?

Usually not. Drive shafts are typically specific to either the right or left side due to differing lengths and mountings to the transfer box or gearbox. Select your exact model and engine to check the precise fitting position.

Why is it important to replace a damaged CV boot immediately?

A split boot lets in dirt and moisture, which act as an abrasive inside the joint. At the same time, lubricating grease is flung out, quickly causing overheating and complete CV joint failure.

Does the fitment guarantee still apply if my BMW has xDrive?

Absolutely. Our fitment guarantee applies to all models, including xDrive variants, provided you have selected parts matching your car's exact make, model and engine variant.