BMW X5 3.0 SI E70

Quality spare parts and drivetrain components for the BMW X5 3.0 SI E70. Select your make, model and engine to ensure an exact fit before ordering.

Products for BMW X5 3.0 SI E70

45 products
1 - 24 of 45
Item no.:1198175
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 637 mm
  • Joint diameter: 86 mm
Item no.:2194247
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,019 mm
  • Joint diameter: 86 mm
Item no.:6138655
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 808 mm
  • Joint diameter: 94 mm
Item no.:0542033
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 30
  • Thread size: M27X1,5
Item no.:0252834
  • Position: Front
  • Total length: 709 mm
  • Outer diameter 1: 10 mm
  • Bolt circle diameter 1: 78 mm
Item no.:6259488
  • Position: Rear
  • Total length: 1,405 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:6249431
  • Position: Rear
  • Total length: 1,424 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:242476
  • Position: Inner
  • Total length: 568 mm
  • Outer splines: 27
Item no.:143926
  • Position: Inner
  • Outer splines: 27
Item no.:642713
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 44 mm
  • Total length: 148 mm
  • Outer splines: 27
Item no.:659248
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 30
Item no.:659280
  • Position: Rear, Outer
  • Inner splines: 28
  • Seal diameter: 69 mm
  • Outer splines: 30
  • Joint diameter: 94 mm
Item no.:328687
  • Position: Front
Item no.:322849
  • Position: Front
Item no.:0846034
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0150941
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 642 mm
Item no.:3512156
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 30
  • Thread size: M27X1,5
Item no.:0608886
  • Total length: 108 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
  • Height: 85 mm
Item no.:611438
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 799 mm
Item no.:621278
  • Position: Rear
  • Total length: 1,445 mm
Item no.:2178149
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,020 mm
  • Joint diameter: 86 mm
Item no.:1167749
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 634 mm
  • Joint diameter: 86 mm
Item no.:249994
  • Position: Front right, Inner
  • Inner splines: 26
  • Seal diameter: 29,97 mm
  • Total length: 569 mm
  • Outer splines: 27
Showing 1–24 of 45 products

Drivetrain for BMW X5 3.0 SI E70

The BMW X5 3.0 SI E70 is a powerful and technically sophisticated SUV that places high demands on its drivetrain. The power transmission system in a vehicle of this size and weight is subjected to substantial strain, particularly under acceleration and whilst driving in challenging road conditions. Maintaining the drivetrain with premium-quality components is essential to preserve the car's distinctive handling characteristics and safety. As specialists in All car makes, we understand the specific engineering requirements of the E70 platform and provide components that meet or exceed original equipment specifications.

When choosing replacement car parts for your BMW X5 3.0 SI E70, accurate fitment is paramount. An incorrectly dimensioned drive shaft or a CV joint with poor tolerances can cause knock-on issues such as vibrations and accelerated wear on surrounding transmission components. We have curated our product range to supply precisely the parts required to keep your vehicle running smoothly and efficiently, whether for your daily commute or more demanding driving.

How the drivetrain is engineered on the BMW X5 3.0 SI E70

The drivetrain of the BMW X5 3.0 SI E70 is built around BMW's intelligent all-wheel-drive system, xDrive. This setup continuously distributes torque between the front and rear axles according to available grip and driving conditions. For seamless operation, it relies on a complex network of shafts and joints. Engine torque from the gearbox and transfer box is directed via propeller shafts to both the front and rear differentials. From each differential, torque is transferred directly to the road wheels through drive shafts fitted with inner and outer CV joints.

Every component in this setup plays a critical role. The front prop shaft is a known wear item on E70 models, operating at continuous operating angles and high rotational speeds. The driveshafts must accommodate suspension travel and steering angles whilst reliably handling the torque of the six-cylinder petrol engine. The exacting mechanical precision of these components is what ensures the responsive, poised driving feel expected of a BMW.

Common faults and symptoms

There are several clear indications that drivetrain components on your BMW X5 3.0 SI E70 are nearing the end of their service life. One of the most frequent symptoms is a distinct clicking or knocking noise from the front axle on full steering lock, which typically points to a failing outer CV joint. This often stems from a split or torn CV boot, which allows lubricating grease to escape and abrasive road dirt to enter, quickly destroying the internal bearing surfaces.

Vibration through the chassis under acceleration is another frequent symptom, often traced to worn inner constant velocity joints or an out-of-balance drive shaft. If the vibrations instead appear at specific cruising speeds or feel centred beneath the cabin, they may point to wear in a propeller shaft or its centre bearing. Leaving these symptoms unaddressed risks secondary damage to the differentials or gearbox, making prompt inspection vital as soon as noises or play arise.

Popular replacement parts for BMW X5 3.0 SI E70

Within our range for the BMW X5 3.0 SI E70, we stock the most critical and frequently requested components to keep your SUV performing at its best. We hold dedicated parts for this specific model variant across the primary driveline categories. Selecting the right subcategory allows you to quickly pinpoint the appropriate replacement items for your vehicle.

  • Drive shafts: We supply a range of complete drive shafts engineered to meet the requirements of both the front and rear axles.
  • Outer CV joints: High-grade replacement outer CV joints, designed to withstand the torque loads and steering articulation demanded by the E70.
  • Propeller shafts: Quality prop shafts tailored to restore smooth power transmission between the transfer box and differentials.

Each of these parts is selected for durability and precise tolerances, ensuring dependable performance that matches your BMW's capabilities.

How to find the right part for your BMW X5 3.0 SI E70

Navigate directly to the appropriate section for the BMW X5 3.0 SI E70:

When diagnosing driveline faults, starting in the right category makes ordering straightforward. By reviewing the exact part categories for the BMW X5 3.0 SI E70, you can readily distinguish between issues in a drive shaft, a CV joint or a prop shaft, and proceed to the section tailored to your symptoms and vehicle specifications.

If you require broader model details, you can also explore our main section for the BMW X5 or view our full inventory for BMW. Our goal is to ensure you can identify and order the correct spare parts with complete confidence.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching directly from our central warehouse in Helsingborg, Sweden across the EU. We combine in-depth technical expertise with a product catalogue tailored to demanding European driving conditions. When ordering from us, you receive high-grade spare parts backed by our commitment to accurate fitment and dedicated customer service.

We partner exclusively with trusted manufacturers adhering to stringent production standards, ensuring you receive durable parts built to last. As a focused driveline specialist, we provide the technical knowledge and personalised advice that general motor factors often lack. Whether you need a replacement drive shaft or a complete propeller shaft for your BMW X5 3.0 SI E70, you can rely on CVJoint24 to deliver the right components every time.

Frequently Asked Questions about Drivetrain for BMW X5 3.0 SI E70

How do I know if a drive shaft fits my BMW X5 3.0 SI E70?

The most reliable method is to select your car's make, model, and engine variant in our search filter. This matches your vehicle's exact technical specifications against our catalogue to ensure a precise fit.

What are the most common symptoms of a failing outer CV joint?

A classic symptom is a sharp clicking noise that occurs when negotiating tight turns at low speeds. Vibrations felt under acceleration can also indicate worn constant velocity joints.

Do you offer a fitment guarantee on parts for BMW X5 E70?

Yes, we always provide a fitment guarantee when you select your vehicle by make, model, and engine, ensuring the replacement part is entirely suitable for your specific car.

Why is the propeller shaft a common wear component on the BMW X5?

Owing to the vehicle's substantial kerb weight and all-wheel-drive system, the propeller shaft endures significant torque and stress. Wear in the universal joints or centre bearing often causes drivetrain vibrations, necessitating prop shaft replacement.

How quickly can I receive my spare parts?

We dispatch all in-stock car parts promptly from our central warehouse so that you can get your BMW X5 3.0 SI E70 back on the road without unnecessary delay.

Do I need to replace the entire drive shaft if only the CV boot is split?

If you catch a damaged CV boot early before dirt ingress or loss of grease has harmed the joint, replacing just the boot kit is often sufficient. However, if knocking noises or play have already developed, the CV joint or the complete drive shaft must be replaced.