BMW X5 4.8 I Xdrive E70

Spare parts and drivetrain components for BMW X5 4.8 I Xdrive E70. Confirm fitment by your make, model and engine before ordering.

Products for BMW X5 4.8 I Xdrive E70

50 products
1 - 24 of 50
Item no.:1153847
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 637 mm
  • Joint diameter: 86 mm
Item no.:2149050
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,019 mm
  • Joint diameter: 86 mm
Item no.:6149668
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 808 mm
  • Joint diameter: 94 mm
Item no.:6187843
  • Position: Rear
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 809 mm
  • Joint diameter: 96 mm
Item no.:0596477
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 30
  • Thread size: M27X1,5
Item no.:0280879
  • Total length: 705 mm
  • Number of joints: 2
  • Outer diameter 2: 47 mm
  • Bolt circle diameter 2: 84 mm
Item no.:6264535
  • Position: Rear
  • Total length: 1,424 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:242745
  • Position: Inner
  • Total length: 568 mm
  • Outer splines: 27
Item no.:143299
  • Position: Inner
  • Outer splines: 27
Item no.:641928
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 44 mm
  • Total length: 148 mm
  • Outer splines: 27
Item no.:654403
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 30
Item no.:654414
  • Position: Rear, Outer
  • Inner splines: 28
  • Seal diameter: 69 mm
  • Outer splines: 30
  • Joint diameter: 94 mm
Item no.:320094
  • Position: Front
Item no.:326373
  • Position: Front
Item no.:629696
  • Position: Rear
  • Total length: 1,380 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:391709
  • Total length: 56 mm
  • Diameter: 24 mm
Item no.:0859310
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0151712
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 642 mm
Item no.:3535600
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 30
  • Thread size: M27X1,5
Item no.:0624182
  • Total length: 108 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
  • Height: 85 mm
Item no.:322730
  • Position: Front
  • Total length: 707 mm
  • Number of joints: 2
  • Outer diameter 2: 47 mm
  • Bolt circle diameter 2: 77 mm
Item no.:619977
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 799 mm
Item no.:623950
  • Position: Rear
  • Total length: 1,405 mm
Showing 1–24 of 50 products

Drivetrain for BMW X5 4.8 I Xdrive E70

The BMW X5 4.8 I Xdrive E70 is a machine that pairs luxury with brute strength, where its potent V8 engine delivers substantial torque to all four wheels. This places extreme demands on the vehicle's drivetrain, which must cope with this power without compromising comfort or safety. As driveline specialists, we understand the unique demands of this particular model. Every single component, from the smallest CV boot to the complete propeller shaft, plays a vital role in transferring power onto the road. Maintaining the drivetrain on a BMW X5 E70 is not merely about maintenance; it is about preserving the precise driving dynamics BMW is famous for.

Our range for this model is extensive and specialised. We focus on supplying parts that meet or exceed original equipment specifications, which is crucial for a heavy SUV with high engine output. By selecting the correct parts, you reduce the risk of consequential damage to costly components such as the transfer box or differentials. We help you navigate the technical specifications so you always receive a product ready for direct fitment.

How the drivetrain is engineered on BMW X5 4.8 I Xdrive E70

The drivetrain of the BMW X5 4.8 I Xdrive E70 is an intricate system designed for intelligent all-wheel drive. At the heart of this setup is xDrive technology, which distributes torque between the front and rear axles via a central transfer box. From here, prop shafts run to the front and rear differentials. Power is then delivered to the wheels via drive shafts fitted with both inner and outer CV joints. This configuration demands immaculate synchronisation and balance to prevent vibrations and driveline harshness, especially given the vehicle's unladen weight and the engine's torque curve.

The front drive shafts on an E70 are subjected to accelerated wear because of steering angles and suspension travel. The outer constant velocity joint must articulate through extreme angles while transmitting torque, making it a critical wear item. The rear of the driveline is dominated by a sturdy propeller shaft that must remain balanced to avoid cabin resonance at higher speeds. Understanding this layout is essential when diagnosing issues with your car's power delivery.

Common faults and symptoms

One of the clearest indicators of driveline trouble on a BMW X5 4.8 I is vibration felt during acceleration or at set motorway speeds. If shuddering vibrates through the entire cabin under throttle, it can often be traced back to a worn inner constant velocity joint or an unbalanced prop shaft. Another telltale symptom is a distinct clicking or knocking noise on full steering lock, which almost always points to a worn outer CV joint on your BMW X5 4.8 I Xdrive E70. This is frequently triggered by a split CV boot, which allows dirt to enter and grease to escape.

You should also inspect for oil seepage around the differentials or transfer box, as this indicates deteriorating oil seals that will eventually ruin internal mechanical components. If you notice any hesitation or jerkiness from the all-wheel-drive system, the drivetrain components may no longer be working smoothly together. Catching these warning signs early is essential to prevent catastrophic failures. Ignoring a mild vibration can quickly damage bearings inside the gearbox or differential due to rotating imbalance.

Common parts to replace on BMW X5 4.8 I Xdrive E70

On this specific model, certain driveline parts naturally see higher wear rates and require replacement to maintain peak reliability. Each driveshaft is subjected to high loads, which is why we stock multiple configurations covering all four corners of the vehicle. The propeller shaft is another vital assembly that frequently requires attention once the centre bearing or universal joints begin to deteriorate. Below are the key replacement categories for your vehicle:

  • Drive shaft for BMW X5 4.8 I Xdrive E70 (5 different designs available)
  • Outer CV joint for BMW X5 4.8 I Xdrive E70 (high-grade replacement for the front axle)
  • Propeller shaft for BMW X5 4.8 I Xdrive E70 (multiple variants for smooth power transmission)

By concentrating on these core product groups, we ensure we possess the dedicated stock and expertise to assist BMW X5 owners properly. Every component is chosen for its resilience against the forces of the 4.8-litre engine and the xDrive system. Replacing worn parts with our high-grade components is an investment in your car's longevity and your driving safety.

How to find the right part for BMW X5 4.8 I Xdrive E70

Proceed to the relevant section for your BMW X5 4.8 I Xdrive E70:

When dealing with a vehicle that has multiple potential drivetrain concerns, it pays to navigate straight to the right subcategory. By checking each specific product group for the BMW X5 4.8 I Xdrive E70, you can distinguish whether the problem stems from a drive shaft, CV joint or propeller shaft, directing you to the exact page that matches your car's symptoms and fitment.

Identifying the exact replacement part for a BMW X5 E70 can occasionally be complex because of subtle differences across equipment levels and production dates. The most dependable method to secure the correct component is to select your vehicle's exact make, model and engine variant in our search filter. This presents only the parts that are technically verified for your specific car, removing the guesswork and preventing incorrect orders.

Once you have located the correct section, such as Propeller shafts for BMW X5 4.8 I Xdrive E70, we also recommend verifying any technical details shown on the product page, including overall length or spline counts, where specified. Our customer support team is always ready to assist if you have any questions about fitment. We want you to find the right component first time, which is why we offer a comprehensive fitment guarantee across our entire driveline range for the BMW X5.

Why buy from cvjoint24.com?

CVJoint24 is not just another car parts retailer; we are your dedicated specialists in vehicle power transmission. As a Swedish driveline specialist shipping from our central warehouse in Helsingborg, Sweden, across the EU, we have developed unmatched technical know-how for demanding vehicles such as the BMW X5 4.8 I Xdrive E70. We understand the specific stresses these cars endure and curate our catalogue accordingly. When you shop with us, you receive precision-engineered, durable car parts built to ensure a confident drive.

We dispatch quickly to minimise your car's downtime in the garage. Backed by our accurate fitment guarantee and our focus on supplying the right component every time, you can order with absolute confidence. Our focus on drivelines and dedication to customer care make us the preferred choice for both DIY mechanics and professional workshops seeking quality and technical expertise. Choose a specialist who understands your BMW inside out.

Frequently asked questions about drivetrain parts for BMW X5 4.8 I Xdrive E70

What are the most common signs of a failing drive shaft on my BMW X5 4.8 I?

The most common symptoms include vibrations during acceleration, clicking noises when taking sharp turns (usually the outer joint), or vibrations at higher speeds, which may indicate imbalance or wear in the inner joints.

Does the same drive shaft fit both the front left and right sides on an E70?

On the BMW X5 E70, drive shafts are usually side-specific due to different lengths and mountings. Always select your vehicle by make, model and engine to verify exactly which side the part is intended for.

How often should the propeller shaft on a BMW X5 4.8 I be inspected?

We recommend a visual inspection at every service. Pay extra attention to cracks in the rubber couplings (flexible discs/guibo) and play in the centre bearing, as these are common wear items on this powerful 4.8-litre model.

What is included when I purchase an outer CV joint for my BMW X5?

Our outer CV joints are normally supplied as complete kits including the joint itself, CV boot, grease, clamps, and any necessary circlip or bolt, providing everything you need for a straightforward replacement.

Can I continue driving if a CV boot is split on my X5?

This is not recommended. A split CV boot allows the grease to escape and dirt to enter, which will ruin the constant velocity joint very quickly. Replacing the boot promptly is inexpensive insurance against having to replace the entire joint later.

Does the fitment guarantee apply if I have modified my car's suspension?

Our fitment guarantee is based on the vehicle's original factory specification matching your make, model and engine. Significant modifications, such as extreme lowering, can alter drive shaft angles; please contact us for advice in these instances.