BMW X5 M 50 D E70

Spare parts and drivetrain components for BMW X5 M 50 D E70. Verify fitment by selecting your make, model and engine before ordering.

Products for BMW X5 M 50 D E70

33 products
25 - 33 of 33
Item no.:394759
  • Diameter: 24 mm
  • Height: 56 mm
Item no.:0968046
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:0699025
  • Total length: 114 mm
Item no.:398379
  • Position: Front
Item no.:693819
  • Position: Rear
Showing 25–33 of 33 products

Drivetrain for BMW X5 M 50 D E70

The BMW X5 M 50 D E70 is a unique machine in the SUV segment, renowned for its impressive tri-turbo diesel engine and colossal torque that places immense demands on the vehicle's drivetrain. Maintaining the power transmission on such a high-performance vehicle requires premium components. Here at CVJoint24, you will find the specific parts engineered to cope with the immense power designed by the M Division. The drivetrain is central to delivering performance to the road, and every link in the chain – from the gearbox to the wheel hub – must remain in peak condition to preserve driving dynamics and safety.

We understand that owners of a BMW X5 M 50 D E70 seek components that not only fit precisely, but also perform reliably under high stress. Our range is tailored to meet the technical demands of the E70 platform, especially for the formidable M 50 D variant. Choosing the correct spare parts extends the operational life of your car and prevents consequential damage to expensive units such as the transfer box and differentials. We are your trusted partner for maintaining your BMW, backed by specialised Swedish driveline expertise.

How the drivetrain is engineered on the BMW X5 M 50 D E70

The drivetrain on the BMW X5 M 50 D E70 is a sophisticated system built around BMW's xDrive all-wheel drive setup. It is engineered to distribute a massive 740 Nm of torque efficiently between the front and rear axles. Output leaves the eight-speed automatic gearbox and travels via the transfer case to two separate propeller shafts. The rear prop shaft drives the rear wheels via the rear differential, while the front propeller shaft channels power forward to the front axle. This demands robust components capable of handling sudden load shifts and high rotational speeds without compromising refinement.

At the wheel ends, the drive shafts take over. The front axle on the E70 M 50 D features drive shafts that must accommodate sharp steering angles and suspension travel simultaneously while transmitting power. Each driveshaft features an inner and outer CV joint protected by durable CV boots. The outer joint enables the wheels to steer, while the inner constant velocity joint accommodates axial movement as the suspension articulates. On a heavy, high-output vehicle like the X5 E70, precision in these joints is critical to prevent vibrations and guarantee seamless power delivery under all driving conditions.

Common faults and symptoms

Despite the exceptional build quality of the BMW X5 M 50 D E70, the drivetrain experiences natural wear, especially under spirited driving or heavy towing. One of the most typical signs that an outer CV joint is failing is a rhythmic clicking noise heard when cornering sharply at lower speeds. If the clicking disappears when driving straight ahead, the bearings inside the joint are almost certainly worn, frequently caused by a split CV boot that has allowed dirt and moisture to enter.

Vibrations under acceleration are another frequent symptom, commonly pointing towards worn inner CV joints or an unbalanced propeller shaft. Because the M 50 D produces such high torque, even slight play in the drivetrain is quickly magnified and felt through the vehicle body. If you notice shuddering at specific speeds or a droning noise from beneath the floor, inspect the prop shaft centre bearing and universal joints. Ignoring these warning signs can allow vibrations to damage gearbox or differential oil seals, resulting in considerably more expensive repairs.

Common replacement parts for BMW X5 M 50 D E70

To help streamline your maintenance, we have categorised the most essential components for your car. On the BMW X5 M 50 D E70, drive shafts and propeller shafts often require attention after many kilometres on the road. We supply dedicated solutions tailored precisely to this model's factory specifications. Below are our most requested product categories for this vehicle:

  • Drive shafts for BMW X5 M 50 D E70 – comprehensive options covering both the front and rear axles.
  • Outer CV joints for BMW X5 M 50 D E70 – complete replacement kits for the wheel side.
  • Inner CV joints for BMW X5 M 50 D E70 – ideal for curing persistent acceleration vibrations.
  • Propeller shafts for BMW X5 M 50 D E70 – precision-balanced units ensuring seamless power delivery between the axles.

Replacing worn components with parts engineered for an exact fit restores your car's original handling and stability. Compromising on quality is never advisable on an M-badged car, where mechanical stresses are significantly higher than on standard models. Our car parts are thoroughly tested to meet the rigorous demands of a modern performance SUV.

Finding the right part for your BMW X5 M 50 D E70

Navigate directly to the appropriate section for your BMW X5 M 50 D E70:

When troubleshooting driveline issues, selecting the right category from the start saves valuable time. By comparing specific sections for the BMW X5 M 50 D E70, it becomes straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft, taking you directly to the parts that match your symptoms and exact fitment.

Sourcing the correct replacement for a specialised performance model like the BMW X5 M 50 D E70 can occasionally present challenges due to differences in specification, chassis options and production dates. The most reliable method to ensure an accurate fit is to filter by your car's exact make, model and engine variant. This takes out the guesswork and prevents incorrect orders that could lead to unnecessary delays in the garage.

If you are unsure which component is causing the issue, we recommend conducting a thorough visual inspection underneath the car. Inspect all CV boots for splits or leaking grease, and check for excessive play in the shafts. Remember that the BMW X5 in the E70 generation features sophisticated architecture; selecting parts backed by our fitment guarantee gives you complete peace of mind. We make finding the right parts straightforward so you can return to the road with total confidence in your drivetrain.

Why shop with CVJoint24

CVJoint24 is the international shop of a dedicated Swedish driveline specialist, dispatching directly from our central warehouse in Helsingborg, Sweden across the European Union. When ordering from us, you benefit from deep technical expertise that general car parts stores rarely offer. We know exactly what is required to keep a BMW X5 M 50 D E70 performing at its best, stocking durable components that meet strict quality standards. With our accurate fitment guarantee, you can be sure the parts you receive will fit your vehicle correctly, saving both time and money.

We dispatch quickly across Europe, which is vital when your vehicle is on the garage ramp and you need replacement parts without delay. Our goal is always to deliver the right part promptly. By combining deep technical knowledge with efficient logistics and customer support that understands drivetrain engineering, we are the trusted partner for DIY mechanics and professional workshops alike. Choose CVJoint24 for dependable components built to handle the road ahead.

Frequently Asked Questions about Drivetrain for BMW X5 M 50 D E70

How do I know if my BMW X5 M 50 D E70 needs a new drive shaft?

The most common signs are vibrations through the car under acceleration or clicking noises when taking sharp turns. If you notice vibrations increasing with speed or load, it is often an inner CV joint or the drive shaft itself that has worn out.

Do parts from a standard X5 E70 fit an M 50 D?

Not always. The M 50 D produces significantly higher torque and frequently uses reinforced drivetrain components. It is therefore crucial to select your vehicle by make, model and engine to ensure you get parts engineered specifically for the M Performance model.

What are the symptoms of a failing propeller shaft on this model?

A worn propeller shaft or a failing centre bearing typically creates a humming noise or vibrations felt throughout the bodywork, especially at speeds between 80 and 120 km/h. You might also hear clunking sounds when engaging a gear or coming off the throttle.

Are CV boots included when I buy a CV joint from you?

Yes, our CV joint kits are supplied as complete assemblies. This means you receive the CV joint, a tailored CV boot, grease, clamps, and any circlips or bolts required for installation.

Why is it important to replace a split CV boot immediately?

The boot protects the CV joint from dirt, road salt and water while retaining the lubricating grease. If the boot splits, contaminants will quickly ruin the joint, leading to a much more costly replacement of the entire joint or driveshaft.

What does your fitment guarantee mean for BMW owners?

Our fitment guarantee means that when you select your vehicle by make, model and engine, we guarantee the part will be technically correct for your car. In the unlikely event that something does not match, we will help you find the right part without any hassle.