BMW X5 Xdrive 30 I E70

Spare parts and drivetrain components for the BMW X5 Xdrive 30 I E70. Select your make, model and engine to confirm correct fitment.

Products for BMW X5 Xdrive 30 I E70

25 products
1 - 24 of 25
Item no.:1150774
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 637 mm
  • Joint diameter: 86 mm
Item no.:2116975
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,019 mm
  • Joint diameter: 86 mm
Item no.:6132221
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 808 mm
  • Joint diameter: 94 mm
Item no.:6176748
  • Position: Rear
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 809 mm
  • Joint diameter: 96 mm
Item no.:0563270
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 30
  • Thread size: M27X1,5
Item no.:0270256
  • Position: Front
  • Total length: 709 mm
  • Outer diameter 1: 10 mm
  • Bolt circle diameter 1: 78 mm
Item no.:6226485
  • Position: Rear
  • Total length: 1,405 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:6258701
  • Position: Rear
  • Total length: 1,424 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:146675
  • Position: Inner
  • Outer splines: 27
Item no.:656409
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 30
Item no.:656884
  • Position: Rear, Outer
  • Inner splines: 28
  • Seal diameter: 69 mm
  • Outer splines: 30
  • Joint diameter: 94 mm
Item no.:323009
  • Position: Front
Item no.:324302
  • Position: Front
Item no.:0116920
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 642 mm
Item no.:613609
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 799 mm
Item no.:3502941
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 30
  • Thread size: M27X1,5
Item no.:0600129
  • Total length: 108 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
  • Height: 85 mm
Item no.:328907
  • Position: Front
  • Total length: 707 mm
  • Number of joints: 2
  • Outer diameter 2: 47 mm
  • Bolt circle diameter 2: 77 mm
Item no.:623676
  • Position: Rear
  • Total length: 1,445 mm
Item no.:2104604
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,020 mm
  • Joint diameter: 86 mm
Item no.:1171525
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 634 mm
  • Joint diameter: 86 mm
Item no.:248583
  • Position: Front right, Inner
  • Inner splines: 26
  • Seal diameter: 29,97 mm
  • Total length: 569 mm
  • Outer splines: 27
Item no.:146579
  • Position: Front left, Inner
  • Inner splines: 26
  • Seal diameter: 43,9 mm
  • Total length: 183 mm
  • Outer splines: 27
Showing 1–24 of 25 products

Drivetrain for BMW X5 Xdrive 30 I E70

The BMW X5 Xdrive 30 I E70 is a powerful SUV that requires a drivetrain in peak condition to handle demanding city driving as well as harsher off-road terrain. The drivetrain is the core of the vehicle's power transmission, responsible for distributing torque from the engine to all four wheels via the advanced xDrive system. At CVJoint24, you will find a dedicated range of components engineered specifically for this model. Maintaining parts such as drive shafts and propeller shafts is essential to prevent costly secondary damage to the transfer box or differentials. We focus on supplying parts that meet or exceed original equipment specifications, ensuring a safe and assured driving experience whatever the surface.

By choosing the correct spare parts, you ensure that your BMW retains its characteristic driving dynamics and safety for many kilometres to come. The E70 generation is renowned for its precision engineering, but its heavy kerb weight places high demands on every component in the driveline. Our range is carefully selected to withstand these stresses, making us the natural choice for BMW owners who refuse to compromise on quality.

How the drivetrain is engineered on the BMW X5 Xdrive 30 I E70

The drivetrain layout on the BMW X5 Xdrive 30 I E70 is complex and technically sophisticated, designed to deliver optimum grip in every scenario. Power is generated by the straight-six engine and sent through the gearbox to a central transfer case. From there, torque is directed via a front and a rear propeller shaft to the vehicle's differentials. The differentials then route this power to the wheels via the drive shafts. Every drive shaft is fitted with CV joints that allow the wheels to move vertically with the suspension and pivot for steering while transferring power smoothly and constantly.

This setup requires exacting precision in every single component to minimise power loss and unwanted vibrations. Because the E70 is a heavy four-wheel-drive SUV, these parts endure substantial loads, particularly during hard acceleration or when towing heavy trailers. The xDrive system operates proactively, constantly adjusting torque distribution between the axles; this means both the inner and outer constant velocity joints must operate flawlessly to avoid mechanical wind-up and stress across the system.

Common faults and symptoms

There are several distinct signs that a driveline component on your BMW X5 is wearing out or has failed. One of the most frequent symptoms is a clicking or knocking noise on full steering lock while driving, which typically points to a worn outer CV joint. If you experience chassis vibrations under acceleration instead, this often indicates an unbalanced prop shaft or wear in an inner CV joint. It is equally important to inspect the CV boots regularly for grease leaks; if a boot splits, grease escapes and road dirt penetrates, rapidly destroying the joint.

Unusual noises from beneath the car during speed changes or when engaging gear can also point to worn centre bearings or play in the universal joints of the propeller shaft. Ignoring these warning signs can result in complete breakdown at the roadside or, worse still, catastrophic damage to the costly transfer box. Early diagnosis and timely replacement of worn components is always the most economical approach for any BMW owner. Inspecting the drivetrain regularly helps you prevent major repairs and ensures your xDrive system works as intended.

Common parts to replace on the BMW X5 Xdrive 30 I E70

For the BMW X5 Xdrive 30 I E70, certain components are more susceptible to wear than others owing to the vehicle's weight and driveline layout. In our range, we have categorised these parts to help you easily locate what you need for your repair:

  • Drive shafts: We supply precision-engineered drive shafts built to handle the substantial torque and demands of the xDrive system.
  • Outer CV joints: Dedicated replacement joints designed for the front wheel hubs, where steering angles and articulation are at their greatest.
  • Propeller shafts: Our catalogue includes complete prop shafts, covering both front and rear shafts to maintain smooth, vibration-free all-wheel drive.

These components are manufactured to exacting tolerances to ensure optimal balance and long-lasting durability. Replacing worn components with our quality parts restores your vehicle's factory smoothness and stability. It is often wise to inspect adjacent parts at the same time; when installing a new driveshaft, check the condition of the wheel bearings and CV boots to ensure a thorough, long-lasting repair.

How to find the right part for your BMW X5 Xdrive 30 I E70

Navigate directly to the relevant subcategory for your BMW X5 Xdrive 30 I E70:

On a vehicle with multiple potential driveline issues, selecting the right category from the start saves time. By comparing the dedicated categories for the BMW X5 Xdrive 30 I E70, you can readily distinguish between issues in a drive shaft, CV joint or propeller shaft and proceed directly to the parts that match your symptoms and specifications.

Our catalogue is continuously updated to ensure accurate fitment guidance. If you are unsure whether a part is compatible, or if your vehicle has been modified, our technical customer support is always here to assist. We are specialists in the BMW X5 drivetrain and will help you pick the right part first time, avoiding returns and getting your SUV back on the road quickly.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, supplying quality car parts from our central warehouse in Helsingborg, Sweden across the European Union. We understand how important it is to receive the correct component promptly, backed by technical expertise and an accurate fitment guarantee that gives you complete peace of mind. We maintain deep category know-how and a stock inventory tailored to demanding European vehicles, including heavy 4x4 models such as the BMW X5 Xdrive 30 I E70.

When you order from us, you receive high-grade replacement parts supported by dedicated expertise from a team that truly knows the drivetrain inside out. We are the trusted choice for both DIY mechanics and professional garages seeking durable components and dependable fitment without compromise. By specialising exclusively in driveline parts, we offer an inventory depth that general motor factors rarely match, ensuring you source the exact part needed for a lasting repair.

Frequently Asked Questions about Drivetrain for BMW X5 Xdrive 30 I E70

How do I know if my BMW X5 Xdrive 30 I E70 needs a new drive shaft?

Common signs include vibrations under acceleration or unusual noises from beneath the vehicle. If you notice shaking under load, it is often the inner joint of the drive shaft that has worn out.

Do all CV joints fit all BMW X5 models?

No, CV joints vary depending on engine options and model years. For the BMW X5 E70, it is vital to select your exact model and engine variant to ensure the splines and dimensions match your vehicle's specifications.

What causes a clicking noise when turning in my BMW X5?

A clicking noise on full steering lock is a classic symptom of a worn outer CV joint, frequently caused by a split CV boot letting in road dirt and moisture.

Is it difficult to replace the propeller shaft on a BMW X5 Xdrive 30 I E70?

It requires the right tools and precision, as the propeller shaft must be perfectly balanced to prevent vibrations. We recommend inspecting both the front and rear prop shafts if you experience driveline imbalance.

How quickly do you dispatch parts for the BMW X5?

We offer prompt dispatch across the EU for our in-stock car parts, meaning you can get your replacement driveline components quickly and get started on your repair.

What does your fitment guarantee mean?

Our fitment guarantee means that when you select your vehicle by make, model and engine variant and purchase the matching part, we guarantee it will technically fit your car.