BMW X5 Xdrive 40E F15 F85

Spare parts and drivetrain components for the BMW X5 Xdrive 40E F15 F85. Select your vehicle make, model and engine to verify fitment before ordering.

Products for BMW X5 Xdrive 40E F15 F85

32 products
1 - 24 of 32
Item no.:1183764
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 662 mm
  • Joint diameter: 86 mm
Item no.:2189439
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 969 mm
  • Joint diameter: 98 mm
Item no.:6169271
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 808 mm
  • Joint diameter: 94 mm
Item no.:0408840
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 184 mm
  • Joint diameter: 82 mm
Item no.:0544671
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 65 mm
  • Outer splines: 30
  • Thread size: M27X1,5
Item no.:246682
  • Position: Front right, Inner
  • Inner splines: 24
  • Splines gearbox side: 27
  • Total length: 495 mm
Item no.:647405
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 44 mm
  • Total length: 148 mm
  • Outer splines: 27
Item no.:652223
  • Position: Rear, Outer
  • Inner splines: 28
  • Seal diameter: 69 mm
  • Outer splines: 30
  • Joint diameter: 94 mm
Item no.:321296
  • Position: Front
  • Total length: 726 mm
  • Outer diameter 1: 29,2 mm
  • Outer diameter 2: 47 mm
  • Bolt circle diameter 2: 77 mm
Item no.:619668
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 799 mm
Item no.:0956360
  • Inner diameter: 43 mm
  • Outer diameter: 90 mm
Item no.:0612527
  • Position: Rear
  • Total length: 77 mm
Item no.:0620749
  • Position: Rear
  • Total length: 124 mm
Item no.:397880
  • Position: Front
Item no.:0915590
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:0671114
  • Total length: 114 mm
Item no.:699208
  • Position: Rear
Item no.:398898
  • Position: Front
Item no.:691691
  • Position: Rear
Showing 1–24 of 32 products

Drivetrain for BMW X5 Xdrive 40E F15 F85

The BMW X5 Xdrive 40E F15 F85 represents a technically advanced generation of SUVs where an internal combustion engine and electric drive work in tandem to deliver formidable performance. The drivetrain in this model is a complex design that demands high-quality components to cope with the immediate torque from the electric motor combined with the power of the petrol engine. When maintaining or repairing your BMW X5, it is essential to choose parts specifically engineered for this hybrid variant. At CVJoint24, we understand the exacting demands placed on the power transmission in a modern BMW, and we supply the parts required to preserve your vehicle's original handling characteristics and operational reliability.

Owning a BMW X5 Xdrive 40E means expecting seamless power delivery between the front and rear axles. Drivetrain components, such as drive shafts and CV joints, endure heavy stresses, especially during urban driving with frequent starts on pure electric power. We specialise in offering a range that meets these challenges, focusing on durability and an exact fit for the F15 chassis. By selecting the correct spare parts, you extend the lifespan of the entire system and avoid secondary damage to costlier components such as the transfer box or differentials.

How the drivetrain is configured on the BMW X5 Xdrive 40E F15 F85

The drivetrain in the BMW X5 Xdrive 40E is based on BMW's intelligent all-wheel-drive system, xDrive, integrated with an electric motor housed within the gearbox. This system varies power distribution between the wheels depending on road surface conditions and driving dynamics. Power is transferred from the gearbox via propeller shafts to the front and rear differentials, and onwards to the wheels through dedicated drive shafts. For the 40E model in particular, the dimensioning of these shafts is critical, as they must handle the combined output of two power units. The system is engineered to provide maximum traction and stability, placing heavy demands on every mechanical link in the chain.

The front drive shafts on a BMW X5 F15 are particularly vulnerable due to steering angles and continuous power transmission. Each driveshaft consists of an inner and an outer CV joint protected by CV boots. The inner joint accommodates axial movement as the suspension articulates, while the outer joint permits steering articulation. For a hybrid SUV like the X5 40E, it is vital that these constant velocity joints maintain minimal play and high precision to avoid interfering with electronic stability control or regenerative braking. A smoothly operating drivetrain is key to maintaining the balance between refined comfort and driving dynamics that BMW is renowned for.

Common faults and symptoms

There are several distinct signs that the drivetrain in your BMW X5 Xdrive 40E is experiencing wear. One of the most typical symptoms of a failing outer CV joint is a clicking or knocking noise heard when turning sharply at low speeds, such as during parking manoeuvres. If the noise disappears when driving straight ahead, the outer joint is almost certainly the culprit. For inner CV joints, the symptoms differ; wear typically presents as noticeable vibrations through the car under acceleration, particularly between 50 and 90 km/h. These vibrations can be felt throughout the cabin, indicating that the joint can no longer centre the shaft correctly.

Another critical area involves the CV boots. If a boot tears, lubricating grease escapes whilst road dirt and moisture penetrate the joint. This rapidly destroys the precision-hardened internal surfaces. For BMW owners, it is also important to listen for drivetrain noises under brisk acceleration in electric mode, as the instant torque can expose emerging play far sooner than normal driving would. Ignoring these warning signs can result in complete mechanical failure, potentially damaging the suspension or gearbox. Early diagnosis and timely replacement of worn car parts is always a sensible investment.

Common parts to replace on the BMW X5 Xdrive 40E F15 F85

To assist with your maintenance, we have categorised the most relevant parts for your vehicle's power transmission. On the BMW X5 Xdrive 40E, complete front drive shafts are frequently required, as replacing the entire assembly is often more cost-effective than replacing individual joints once wear is advanced. We provide a range tailored to the specific demands of this variant. Below are direct links to the most relevant categories for your vehicle:

  • Drive shafts for BMW X5 Xdrive 40E F15 F85 – Complete shafts for straightforward installation and maximum service life.
  • Outer CV joints for BMW X5 Xdrive 40E F15 F85 – For resolving clicking noises when cornering.
  • Inner CV joints for BMW X5 Xdrive 40E F15 F85 – The solution for tackling vibrations during acceleration.

Alongside these primary assemblies, drive shaft boots and ABS rings also periodically require replacement. As the BMW X5 is a heavy vehicle with substantial power, these components naturally wear over time. Choosing car parts from our range ensures your Xdrive 40E maintains its technical integrity. We currently supply drive shafts, outer CV joints and inner CV joints specifically listed for this model, providing you with the exact options needed for an effective repair.

How to find the right part for the BMW X5 Xdrive 40E F15 F85

Navigate directly to the relevant subcategory for your BMW X5 Xdrive 40E F15 F85:

When diagnosing a vehicle with multiple potential driveline issues, starting in the correct category saves valuable time. By comparing the exact component sections for the BMW X5 Xdrive 40E F15 F85, it is easier to differentiate between faults in a drive shaft, constant velocity joint or prop shaft, and proceed to the page that matches your symptoms and fitment needs.

Finding the right spare part for a BMW can sometimes feel complicated due to frequent technical updates and varying equipment levels. For the BMW X5 Xdrive 40E F15 F85, checking specifications is especially important because hybrid components often differ from pure petrol or diesel variants. The easiest and most reliable way to identify the correct component is to filter by your car's make, model and engine variant in our catalogue. This ensures that spline counts, lengths and mounting points match the original equipment precisely.

When selecting driveshafts or CV joints, you should also take note of any optional equipment packages that might influence driveline specifications. Whilst our system handles the core filtering, we always recommend making a visual comparison with your existing part where possible, or checking the technical dimensions provided on our product pages. If you are ever unsure, our specialist team is on hand to assist. Our aim is to ensure you buy with complete confidence and receive parts that fit first time, saving garage labour and avoiding unnecessary returns.

Why shop with CVJoint24

As the international shop of a Swedish driveline specialist with its central warehouse in Helsingborg, Sweden, CVJoint24 provides an extensive range of dedicated drivetrain components backed by deep technical expertise. We focus exclusively on power transmission, giving us specialized knowledge that general car parts suppliers often lack. When you order from us, you receive high-calibre spare parts alongside the reassurance of our accurate fitment guarantee. We know your BMW X5 Xdrive 40E demands first-rate components, which is why we hold our manufacturing partners to stringent quality standards.

We understand how essential quick delivery is when your vehicle is booked in at the garage or up on axle stands. That is why we operate streamlined logistics to supply customers swiftly across the European Union. Our focus is on making it simple to order the right item the first time and have it delivered directly to your doorstep or workshop. With our commitment to quality, product specialisation and knowledgeable customer support, we are the trusted choice for drivers across Europe seeking professional driveline solutions. Experience the advantage of working with a genuine specialist.

Frequently Asked Questions about Drivetrain for BMW X5 Xdrive 40E F15 F85

What are the most common signs that a drive shaft needs replacing on my BMW X5 40E?

The most common signs are clicking noises when making sharp turns (outer joint) or vibrations through the car under acceleration (inner joint). You should also check whether the CV boots are intact, as leaking grease quickly leads to wear.

Do the same drive shafts fit the X5 40E as standard diesel models?

No, not always. The hybrid Xdrive 40E model can have specific dimensions and requirements due to the electric motor's torque. Always select your vehicle by make, model and engine to ensure the correct fitment.

What does your fitment guarantee mean for BMW parts?

Our fitment guarantee means that when you select your specific model and engine to find your part, we guarantee it fits your BMW X5 Xdrive 40E F15 F85. If it unexpectedly does not fit, we will help you find the right part at no extra cost.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

It depends on the wear. If only the joint is worn and the shaft is otherwise in good condition, you can replace just the CV joint. However, on a BMW X5 it is often more time-efficient and reliable to replace the complete drive shaft, especially if the vehicle has covered high mileage.

How does electric drive affect wear on the drivetrain in an X5 40E?

The electric motor delivers maximum torque instantly from a standstill, which can place greater stress on drive shafts and CV joints than a traditional combustion engine. This makes it especially important to fit high-quality components designed to withstand these loads.

How quickly can I get my spare parts delivered?

We dispatch quickly from our central warehouse so you receive your parts promptly across the EU. Our goal is to get your BMW X5 back on the road as swiftly as possible with the right parts.