BMW Z3

Spare parts and drivetrain components for the BMW Z3.

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW Z3

19 products
1 - 19 of 19
Item no.:6119167
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:0278793
  • Diameter: 25 mm
  • Bearing thickness: 29 mm
  • Hole spacing c/c: 160 mm
Item no.:0165983
Item no.:610214
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 600 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:0465373
  • Position: Rear, Inner
  • Inner splines: 25
  • Outer diameter: 100 mm
Item no.:0967659
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:695853
  • Position: Rear
Item no.:697724
  • Position: Rear
Item no.:0281310
  • Diameter: 25 mm
  • Bearing thickness: 29 mm
  • Hole spacing c/c: 160 mm
Item no.:0928891
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:697072
  • Position: Rear
Item no.:697946
  • Position: Rear

Drivetrain for BMW Z3

The BMW Z3 is an iconic model that demands precision in every component to preserve its characteristic driving pleasure and sporty road manners. The drivetrain is the core of the car's power transfer, responsible for channelling engine power cleanly and effectively to the road. At CVJoint24, you will find a carefully chosen range of parts tailored specifically for the BMW Z3. Whether you drive an early roadster or a later coupé, correctly dimensioned and balanced components are vital for both performance and safety. We focus on providing parts that match or exceed original specifications to ensure durability and an authentic driving feel. Maintaining your drivetrain is not merely routine servicing, but an investment in the long-term reliability and value of your car.

How the BMW Z3 drivetrain is configured

The BMW Z3 uses a classic front-engine, rear-wheel-drive layout. Power flows from the gearbox via a BMW Z3 propeller shaft to the rear differential. From the differential, output is distributed to the rear wheels through two drive shafts. This layout demands that every component is balanced to prevent vibrations and premature bearing wear. Because the Z3 shares chassis elements with proven earlier platforms, verifying exact measurements and connection types before ordering is essential. The prop shaft is typically split and supported by a centre bearing, whilst the drive shafts feature constant velocity joints that accommodate suspension travel without interrupting drive. Every link in the chain must work seamlessly to transfer power without losses.

Common faults and symptoms

There are several typical signs that parts in the drivetrain of your BMW Z3 are worn or damaged. One of the most common issues is vibration through the body shell under acceleration or at specific road speeds, often pointing to an unbalanced propeller shaft or a deteriorated centre bearing. A sharp metallic clicking during tight turns or when pulling away typically indicates that a BMW Z3 driveshaft has a worn outer or inner CV joint. Other symptoms include oil weeping from differential seals or a persistent whining noise from the rear axle. Ignoring these warnings can lead to secondary damage to the gearbox and suspension, making prompt diagnosis and repair the most cost-effective path.

Common replacement parts for the BMW Z3

Within our BMW Z3 catalogue, we see steady demand for driveline parts subject to high mechanical loads. We stock a comprehensive selection of drive shafts alongside prop shafts to suit different engine options and production years. Here are the key assemblies to inspect during servicing or overhaul:

  • BMW Z3 drive shaft – complete assemblies for quick, dependable replacement after joint wear or shaft damage.
  • BMW Z3 propeller shaft – factory-balanced shafts that eliminate driveline harshness and restore cruising refinement.

Selecting the matching category helps you quickly find the correct parts for your setup. Because the Z3 range spans everything from frugal four-cylinder engines to high-performance six-cylinder M variants, component dimensions vary substantially, making our specialist range a genuine asset.

How to find the right part for your BMW Z3

Navigate to the relevant section for your BMW Z3:

With multiple driveline components that can show similar symptoms, pinpointing the right category first is always wise. Comparing the specific subcategories for the BMW Z3 helps you tell whether an issue stems from a drive shaft, a CV joint or the prop shaft, leading you directly to the correct replacement.

Finding the exact part for your BMW Z3 can be tricky due to differences between model years, gearbox versions and engine choices. To make ordering straightforward, our shop lets you select your car by make, model and engine variant. Filtering by these technical details ensures you only view components engineered to fit your car, avoiding fitting issues. If you are ever unsure, we recommend checking physical dimensions, spline counts or original OE part numbers on your existing component. Our catalogue helps you get the right car parts first time, saving both workshop hours and unnecessary expense.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist based in Helsingborg, Sweden, with extensive expertise in rear-wheel-drive configurations like the BMW Z3. We appreciate the importance of tight tolerances and premium quality, especially on enthusiast sports cars where mechanical feel is central. With deep category knowledge and a well-stocked European warehouse carrying drive shafts, CV joints and propeller shafts, we provide components that general motor factors frequently fail to stock. Combining technical competence with dependable EU shipping, we are your trusted source for durable drivetrain spares.

Frequently Asked Questions about Drivetrain Parts for BMW Z3 - Power Transmission Spare Parts

How do I know if my BMW Z3 needs a new propeller shaft?

The most common symptoms are vibrations through the body that intensify with speed or become especially noticeable under acceleration. Unusual noises from the centre bearing can also indicate that the prop shaft needs inspecting.

Do all drive shafts fit every BMW Z3 model?

No, there are significant differences in length and mountings depending on whether the car has a four-cylinder or six-cylinder engine, as well as the model year. Always select your vehicle's exact make, model and engine to find the correct fitment.

What is the advantage of buying a complete drive shaft for my Z3?

A complete drive shaft includes both inner and outer CV joints as well as CV boots. This makes installation significantly quicker and more reliable than replacing a single joint, and it eliminates the risk of future failures in the remaining old components.

Can I search for parts for my BMW Z3 by make and model?

Yes, our search function is designed to match your vehicle's make, model and engine variant against the correct technical specifications, ensuring guaranteed fitment for your spare parts.

Why is my car vibrating even though the wheels are balanced?

If wheel balancing does not resolve the issue, the fault often lies within the drivetrain. On the BMW Z3, a worn propeller shaft centre bearing or an unbalanced prop shaft are very common causes of chassis vibrations.

Do you sell propeller shafts for both the roadster and coupé?

Yes, our range of 24 different propeller shafts covers most variants of both the BMW Z3 Roadster and Z3 Coupé, regardless of engine choice.