BMW Z3 Roadster 1.9 I E36

Spare parts and drivetrain components for BMW Z3 Roadster 1.9 I E36. Select your make, model and engine to verify fitment before ordering.

Products for BMW Z3 Roadster 1.9 I E36

14 products
1 - 14 of 14
Item no.:6192511
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 592 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0274111
  • Diameter: 25 mm
  • Bearing thickness: 29 mm
  • Hole spacing c/c: 160 mm
Item no.:624953
  • Position: Rear
  • Total length: 1,256 mm
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 84 mm
  • Outer diameter 2: 14 mm
Item no.:618685
  • Position: Rear
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 585 mm
  • ABS teeth: 48
Item no.:6524211
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0451262
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 94 mm
Item no.:618604
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 607 mm
  • ABS teeth: 48
Item no.:0963562
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:691039
  • Position: Rear
Item no.:693036
  • Position: Rear
Item no.:693153
  • Position: Rear
Item no.:640994
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
Item no.:647857
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 64 mm
  • Total length: 126,5 mm
  • ABS teeth: 48

Drivetrain for BMW Z3 Roadster 1.9 I E36

The BMW Z3 Roadster 1.9 I E36 is an iconic model that demands top-quality components to retain its characteristic driving pleasure. As a Swedish driveline specialist, we supply a carefully chosen range specifically for this model. The power transmission is the heart of your car, and every component in the chain must work in perfect harmony to transfer the power of the four-cylinder engine onto the tarmac. Choosing the right parts for your BMW Z3 Roadster not only protects your car's performance, but also its long-term value. At CVJoint24, we are committed to providing technical expertise and a wide, deep product range, making us the natural choice when maintaining or repairing your vehicle's drivetrain. Our goal is for every owner to feel confident that the parts they order match their car's precise technical specifications and chassis layout.

How the drivetrain is arranged on the BMW Z3 Roadster 1.9 I E36

The drivetrain on a BMW Z3 Roadster 1.9 I E36 follows the classic layout with a front-mounted engine and rear-wheel drive. Power is produced by the engine and routed via the gearbox to a central propeller shaft. This shaft runs down the centre of the car and delivers torque to the differential on the rear axle. From the differential, power is directed out to the rear wheels through two drive shafts. Because this specific variant relies on a proven mechanical architecture, the setup is robust yet prone to wear in joints and bearings over time. Every component, from the inner and outer CV joints to the prop shaft centre bearing and universal joints, plays a key role in minimising vibration and maximising efficiency. Understanding this mechanical chain is vital when diagnosing faults, as an issue in one part often travels along the line and creates symptoms in another part of the system. A properly functioning driveline is the foundation for the direct response expected of a true BMW roadster.

Common faults and symptoms

When the drivetrain on your BMW Z3 Roadster 1.9 I E36 begins to wear out, distinct warning signs usually appear. One of the most typical symptoms of a faulty drive shaft is a rhythmic clicking noise heard on sharp turns at low speed. This usually points to a worn outer CV joint, frequently caused by a split CV boot that has allowed road dirt in. If you instead notice vibrations throughout the bodyshell under acceleration, the inner CV joint or the propeller shaft could be the culprit. Vibrations occurring at set speeds, often around 80–100 km/h, are textbook signs of an unbalanced prop shaft or a failed centre bearing. It is also wise to watch for oil leaks around the differential or gearbox, as inadequate lubrication can quickly lead to expensive failures. Addressing these symptoms promptly helps you avoid consequential damage to surrounding drivetrain components and keeps your car safe on European roads.

Common parts to replace on the BMW Z3 Roadster 1.9 I E36

For the BMW Z3 Roadster 1.9 I E36, two primary component types form the core of our range: drive shafts and propeller shafts. We supply drive shafts for the BMW Z3 Roadster 1.9 I E36 built to original specifications to ensure a hassle-free fit. The driveshafts on this model endure significant stress, particularly during spirited driving, and it is not unusual for constant velocity joints to wear out after many kilometres. Alongside drive shafts, we also stock prop shafts for the BMW Z3 Roadster 1.9 I E36, a crucial component for resolving driveline vibrations. Replacing a complete shaft is often far more cost-effective and dependable than trying to rebuild individual joints on an old assembly. Our parts are selected for their durability and precision, matching the high standards demanded by any BMW. Fitting new, high-grade components restores that firm, precise driveline feel the car had when leaving the factory.

How to find the right part for your BMW Z3 Roadster 1.9 I E36

Navigate directly to the right category for your BMW Z3 Roadster 1.9 I E36:

When diagnosing several potential drivetrain issues, starting directly in the relevant category is always best. Comparing the specific subcategories for the BMW Z3 Roadster 1.9 I E36 makes it simple to distinguish between drive shaft, CV joint or prop shaft problems, taking you straight to the page that matches your symptoms and fitment.

We always advise inspecting all mounting fasteners and adjacent seals during installation. With our help, you will quickly find the right part, whether undertaking a major overhaul or routine maintenance.

Why shop at CVJoint24

Choosing CVJoint24 means partnering with a specialist offering comprehensive technical expertise in BMW driveline systems. We are a Swedish driveline specialist shipping across the EU directly from our central warehouse in Helsingborg, Sweden, dedicated to offering exceptional product accuracy and quality. Our fitment guarantee provides complete peace of mind that the parts you order will fit your BMW Z3 Roadster 1.9 I E36 without complication. We respect that your time is valuable, dispatching stocked lines promptly so you can get your car back on the road without delay. Our philosophy is 'the right part first time' and 'always the correct item', guiding our customer support as well as our technical documentation. By combining a comprehensive range with specialised knowledge and reliable delivery across Europe, we offer an outstanding customer experience. Trust us for your next repair and experience the difference of a genuine driveline specialist.

Frequently Asked Questions about Drivetrain for BMW Z3 Roadster 1.9 I E36

How do I know if my BMW Z3 Roadster 1.9 I E36 needs a new drive shaft?

The most common signs are a clicking noise when cornering sharply or vibrations under acceleration. If the CV boot is split and grease has leaked out, there is a high risk that the CV joint is damaged and the complete drive shaft may need replacing.

How do I find the correct propeller shaft for my car?

Simply select your car's make, model and engine variant in our search filter to find the correct propeller shaft and drive shafts specifically matched to your BMW Z3 Roadster 1.9 I E36.

What are the symptoms of a worn propeller shaft centre bearing?

A worn centre bearing often causes a whining or grinding noise, as well as vibrations felt through the centre console or floorpan of the car, particularly within specific speed ranges.

Do you offer a guaranteed fit for BMW Z3 drivetrain components?

Yes, we guarantee a correct fit for all our parts when you select your vehicle's make, model and engine, ensuring you receive components tailored precisely to your car's specifications.

Is it difficult to replace a drive shaft on a BMW Z3 Roadster?

It requires some mechanical experience and the right tools, as the rear axle layout on the Z3 is quite compact. We recommend consulting a workshop manual closely to ensure the correct tightening torques are used.

How quickly are the parts for my BMW dispatched?

We offer fast delivery on all in-stock products across the EU, ensuring you quickly receive your new drive shafts or propeller shafts to get your repair underway.