Chevrolet Epica
Car parts and drivetrain components for Chevrolet Epica.
Products for Chevrolet Epica
- Position: Outer
- Seal diameter: 55,5 mm
- Inner splines: 32
- Outer splines: 28
- Position: Front right, Inner
- Seal diameter: 43 mm
- Inner splines: 32
- Diameter: 43 mm
- Splines gearbox side: 26
- Position: Front left, Inner
- Splines gearbox side: 34
- Splines wheel side: 32
- ABS teeth: 32
- Position: Front left
- Total length: 528 mm
- Splines gearbox side: 27
- Splines wheel side: 28
- Position: Outer
- Seal diameter: 55,5 mm
- Inner splines: 34
- Outer splines: 28
- Joint diameter: 90 mm
- Position: Outer
- Inner splines: 34
- Outer diameter: 93 mm
- Splines wheel side: 28
- Total length: 623 mm
- Splines gearbox side: 27
- Splines wheel side: 28
- ABS teeth: 0
- Position: Front, Outer
- Inner splines: 29
- Splines wheel side: 28
- Total length: 528 mm
- Splines gearbox side: 27
- Splines wheel side: 28
- ABS teeth: 0
Frequently Asked Questions about Drivetrain for Chevrolet Epica – Power transmission spare parts
How do I know if my Chevrolet Epica needs a new drive shaft?
The most common signs are vibrations through the bodywork during acceleration or a clunking noise from the vehicle's underside. If the vibrations stop when you release the throttle, the inner CV joint or the shaft itself is often the issue.
Why is there a clicking noise when I turn in my Chevrolet Epica?
A clicking sound when turning is almost always caused by a worn outer CV joint. This often happens because a CV boot has split, allowing grease to leak out and dirt to enter.
How do I find parts for my Chevrolet Epica?
You can easily filter for the drive shafts and CV joints that match your Chevrolet Epica by selecting your car's make, model, and engine variant on cvjoint24.com.
Is there a difference between drive shafts for manual and automatic gearboxes?
Yes, there can be differences in length and splines depending on the transmission type. Always check the specifications or use our vehicle selector to ensure you get the correct part.
What is included when I buy an outer CV joint for my Epica?
Normally, the CV joint itself, a new CV boot, grease, clamps, and any circlips or bolts required for installation are included.
Do I have to replace the complete drive shaft if only the joint is faulty?
No, if the shaft itself is straight and undamaged, you can choose to replace just the outer constant velocity joint, which is a cost-effective repair.