Chrysler Cirrus

Welcome to your specialist for All car makes and drivetrain components for the Chrysler Cirrus. As a dedicated Swedish specialist, we supply precision car parts engineered to maintain...

Products for Chrysler Cirrus

7 products
1 - 7 of 7
Item no.:0618816
  • Total length: 112 mm
Item no.:0679950
  • Total length: 95 mm
Item no.:398028
  • Position: Front
Item no.:296141
  • Position: Front right
Item no.:348921
  • Position: Inner
  • Inner splines: 32
  • Splines gearbox side: 25
  • Seal diameter: 40 mm
  • Outer diameter: 87 mm
Item no.:344898
  • Position: Inner
  • Inner splines: 32
  • Splines gearbox side: 25
  • Seal diameter: 40 mm
  • Outer diameter: 87 mm

Chrysler Cirrus Drivetrain

The Chrysler Cirrus is a model that demands precision when it comes to driveline maintenance. As a front-wheel-drive saloon, the drivetrain is the heart of the car's ability to transfer power from the engine to the road smoothly and efficiently. Here at CVJoint24, you will find a carefully curated range of components tailored specifically to this model. We understand that every detail counts, from the smallest circlip to the sturdiest CV joint. Choosing the right parts not only extends your vehicle's lifespan, but also ensures that driving comfort remains at the factory-intended standard. Our specialist expertise in Chrysler vehicles makes us the trusted choice for drivers across Europe seeking quality and reliability. Maintaining your drivetrain is an investment in safety and retained value, especially on a car like the Cirrus where mechanical harmony is vital to a smooth ride.

How the drivetrain works on the Chrysler Cirrus

The drivetrain layout on the Chrysler Cirrus follows a conventional configuration for front-wheel-drive cars with a transverse engine. Power travels from the engine through the gearbox to two drive shafts, which in turn drive the front wheels. Each driveshaft is fitted with two joints: an inner CV joint closest to the gearbox and an outer CV joint at the wheel hub. The inner joint is typically a tripod design, allowing the shaft to plunge in and out as the suspension travels over road surfaces. The outer joint uses a ball-type construction that allows steering articulation while continuing to transfer torque. This intricate mechanical setup requires all components to work in unison, supported by flawless lubrication. High-performance grease is retained by rubber CV boots. If a boot splits, road dirt, grit and moisture penetrate the sensitive bearings, rapidly accelerating wear and risking complete driveline failure if left unattended.

Common faults and symptoms

There are several telltale signs that your Chrysler Cirrus drivetrain requires attention. One of the most typical symptoms of a worn inner constant velocity joint on the Chrysler Cirrus is vibration under acceleration. These vibrations can often be felt through the floor pan or the steering wheel, easing off the moment you lift your foot from the accelerator. If the problem lies in an outer joint instead, you will typically hear a clicking or knocking sound on full steering lock, such as when turning sharply at junctions or parking. Other warning signs include grease splattered on the inside of the wheel rims or on the ground beneath the car, pointing to a damaged CV boot. You should also watch for clunking noises during engine braking or abrupt driveline snatching. Ignoring these symptoms can lead to a sheared drive shaft or gearbox damage, resulting in much more costly repairs and leaving you stranded.

Common parts to replace on the Chrysler Cirrus

On the Chrysler Cirrus, driveshaft-related components require regular inspection to prevent sudden breakdowns. The inner CV joint is a critical wear point subjected to high operating stresses, especially on high-mileage cars or those driven frequently in stop-start urban conditions. We supply high-quality replacement parts for the Chrysler Cirrus inner constant velocity joint that meet or exceed original equipment specifications for strength and fit. Beyond the joints themselves, boot kits are among the most frequently replaced items. Inspecting the boots during every routine service can save significant expense, as replacing a worn boot early keeps road grime out of the costlier mechanical bearings. Circlips, specialised CV joint grease and retaining clamps should also be renewed during any repair to guarantee a tight, durable seal. Fitting the correct parts ensures your driveline remains quiet, reliable and efficient for thousands of kilometres ahead.

Finding the right parts for your Chrysler Cirrus

Navigate directly to the relevant category for your Chrysler Cirrus:

When diagnosing driveline faults, starting in the precise subcategory saves valuable time. By comparing the exact component sections for the Chrysler Cirrus, it is much simpler to isolate issues between drive shafts, CV joints or propeller shafts and proceed to the parts matching your symptoms and specifications.

Using these category links takes you straight to the exact product level for your Chrysler, ensuring components match your vehicle's factory specifications perfectly.

Why shop with CVJoint24

Choosing CVJoint24 means partnering with a Swedish driveline specialist dedicated to technical precision and premium quality. We understand that your Chrysler Cirrus deserves dependable parts to stay safe and reliable on the road. Backed by our accurate fitment guarantee, you can order with absolute confidence that your parts will fit straight out of the box without modification. We dispatch quickly across the EU from our central Swedish warehouse, keeping workshop downtime to a minimum. Our focused expertise in All car makes and vehicle drivelines means we can deliver expert guidance that general car-parts factors rarely provide. We aim to help you get the correct part first time, delivered directly to your door. With us, you receive more than just a spare part: you get a dependable complete solution from specialists who genuinely understand driveline mechanics.

Frequently Asked Questions about Chrysler Cirrus

How do I know if my Chrysler Cirrus needs a new inner CV joint?

The most common symptom is vibrations through the car that appear under acceleration but disappear when you lift off the throttle. This typically indicates wear in the inner joint's tripod bearing.

How do I find the right parts for my car?

Simply select your Chrysler Cirrus model, model year and engine variant in our search filter to find the exact drivetrain parts for your car.

What does your fitment guarantee mean?

Our fitment guarantee means we guarantee the part will fit your car when selected using your vehicle's correct model and engine details. In the unlikely event that it does not fit, we will help you find the correct part immediately.

Why does my Chrysler Cirrus vibrate under acceleration?

Vibrations under acceleration are usually caused by a worn inner CV joint. As the joint wears, play develops, creating an imbalance in the drive shaft under load.

How quickly will my parts be delivered?

We dispatch quickly across the EU from our Swedish central warehouse, ensuring you can repair your car and get back on the road without delay.

Is it difficult to replace an inner CV joint on a Cirrus?

It requires some mechanical experience and the right tools, as the drive shaft must be removed from the gearbox. We recommend following a workshop manual or consulting a professional mechanic.