Chrysler Vision

Spare parts and drivetrain components for Chrysler Vision.

Products for Chrysler Vision

5 products
1 - 5 of 5
Item no.:1107272
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 33
  • Total length: 690 mm
  • ABS teeth: 50
Item no.:0304900
  • Position: Front
  • ABS teeth: 50
  • Inner diameter: 86 mm
  • Outer diameter: 90 mm
  • Width: 13 mm
Item no.:2177868
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 33
  • Total length: 527 mm
  • ABS teeth: 50
Item no.:0508524
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 33
  • Seal diameter: 50 mm
  • ABS teeth: 50
Item no.:0612501
  • Outer diameter: 24 mm
  • Diameter: 85 mm

Drivetrain for Chrysler Vision

The Chrysler Vision is an executive saloon that requires precision when it comes to maintaining its power transmission. The drivetrain is vital to the car's ability to drive smoothly and efficiently, and for a model such as the Vision, it is particularly important to use components designed to handle the car's weight and torque. Here at CVJoint24, you will find a carefully selected range of parts tailored specifically to restore your car's original driving dynamics. We focus on offering components that not only fit physically, but also match or exceed the quality of the original equipment.

Maintaining the drivetrain on a Chrysler Vision involves more than simply replacing broken parts; it ensures that the entire system from the gearbox to the wheel hub works in harmony. A worn component can quickly cause secondary damage to other driveline parts, making it cost-effective to act at the very first sign of wear. We supply the necessary car parts to keep your vehicle reliable for many kilometres to come.

How the drivetrain is engineered on the Chrysler Vision

The Chrysler Vision drivetrain is built around a front-wheel-drive layout where power is transferred from the engine via a transverse gearbox to the front wheels. This setup relies on two drive shafts that must accommodate suspension travel and steering angles simultaneously whilst transmitting power. Each drive shaft is fitted with an inner and an outer CV joint. The inner joint sits closest to the gearbox and permits axial movement, whilst the outer constant velocity joint sits at the wheel hub to allow steering.

Alongside the mechanical shafts, the ABS ring plays a vital role in modern vehicle safety. Fitted directly to the CV joint, this ring provides pulses to the vehicle's ABS sensors. On the Chrysler Vision, it is critical that these components remain in top condition, as the slightest crack or corrosion on the ABS reluctor ring can disrupt the braking system and stability control. The entire assembly is engineered to deliver a quiet, refined ride—a hallmark of this American saloon.

Common faults and symptoms

There are several clear warning signs that the drivetrain on your Chrysler Vision is beginning to wear. One of the most typical symptoms of a failing outer CV joint is a distinct clicking or knocking noise heard on full lock, such as when parking or taking tight turns. If the noise disappears when driving straight ahead, the outer joint is almost certainly the culprit. Vibrations through the steering wheel or bodywork during acceleration usually indicate an out-of-balance or worn drive shaft, or play in the inner joint.

Another frequent issue involves the ABS. If the ABS warning light illuminates on the dashboard, or if you feel the ABS kick in under gentle braking on dry tarmac, it is frequently caused by a cracked or corroded ABS ring. Given the age of the Chrysler Vision, corrosion is a common culprit, causing the ring to swell and split. Inspecting the CV boots is equally essential: a split or damaged CV boot allows grease to escape and lets in road grit and moisture, quickly destroying the lubricated bearing surfaces inside the CV joint.

Common replacement parts for Chrysler Vision

When repairs are due, certain driveline parts are replaced more often than others to restore dependable performance. Based on our specialist experience, the following categories are the most frequently requested for this model:

  • Drive shafts for Chrysler Vision – Complete shafts for a straightforward replacement when dealing with severe wear or imbalance.
  • Outer CV joints for Chrysler Vision – The most common wear component, typically replaced when clicking noises develop on lock.
  • ABS rings for Chrysler Vision – A cost-effective solution to cure brake system sensor signal faults.

By navigating to the right subcategory, you can quickly find the exact parts available. For the Chrysler Vision, we maintain a dedicated range with drive shafts and ABS rings to cover the most common repair needs. Replacing an entire drive shaft is often far more time-efficient than attempting to rebuild an old assembly with new joints, especially on higher-mileage vehicles.

Finding the right part for your Chrysler Vision

Go directly to the right category for the Chrysler Vision:

On a vehicle with several potential driveline issues, it pays to start in the correct section immediately. By comparing the dedicated categories for the Chrysler Vision, it is much easier to identify whether you need a drive shaft, a CV joint or propeller shaft components, taking you straight to the products that match your symptoms and vehicle fitment.

Identifying the exact component for your Chrysler Vision can occasionally be tricky due to minor variations across model years and engine options. The most reliable approach is to select your car's make, model and engine from our catalogue. Filtering our range this way displays only the parts verified to fit your specific vehicle, reducing the risk of ordering the wrong part and saving you valuable time in the workshop.

Once your matching results appear, we still advise double-checking technical specifications such as the tooth count on the ABS ring or overall driveshaft length, as components may have been updated during the car's lifetime. We strive to provide comprehensive technical data for every listing. If you are ever unsure about the fitment of a Chrysler Vision drive shaft or ABS ring, our technical team is always on hand to advise you.

Why shop with CVJoint24?

CVJoint24 is not just another generic parts retailer; we are the international shop of a Swedish driveline specialist, dispatching directly from our central warehouse in Helsingborg, Sweden, to customers throughout the EU. Our singular focus on drivetrain components means we offer a level of technical support and product knowledge that general car factors simply cannot provide. We know precisely what is required of an outer CV joint for the Chrysler Vision to ensure long-lasting, trouble-free operation on European roads.

Shopping with us gives you access to a specialist catalogue with high stock turnover, guaranteeing fresh, high-grade components and fast delivery across Europe. We combine dedicated technical expertise with a straightforward search by make, model and engine for a smooth ordering process. Choosing CVJoint24 means choosing premium quality, exact fitment and specialist knowledge—giving your Chrysler Vision everything it needs for many more comfortable kilometres.

Frequently Asked Questions about Drivetrain for Chrysler Vision – Power Transmission Spare Parts

How do I know if my Chrysler Vision needs a new drive shaft?

The most common signs are pronounced vibrations during acceleration or a clunking noise from beneath the car. If the vibrations cease when you lift off the accelerator, this is often a sign of internal wear in the drive shaft.

Why is the ABS warning light on in my Chrysler Vision?

This is often caused by a cracked or corroded ABS ring on the CV joint. When the ring is damaged, the sensor cannot read the wheel speed correctly, causing the system to trigger a fault code and illuminate the warning light.

Can I replace just the ABS ring, or do I need to replace the entire CV joint?

On the Chrysler Vision, it is often possible to replace just the ABS ring if the CV joint itself is otherwise in good condition. This is a cost-effective solution that restores the proper operation of the ABS system.

What causes clicking noises when turning in a Chrysler Vision?

This is almost always caused by a worn outer CV joint. As the balls inside the joint wear down, play develops, producing the characteristic clicking noise when the joint operates at an angle.

How do I find the right drivetrain parts for my Chrysler Vision?

Select your make, model and engine variant on our website. The system will filter out the drive shafts, CV joints and ABS rings specifically matched to the technical specifications of your Chrysler Vision.

Are your parts for the Chrysler Vision OEM quality?

Yes, we supply components manufactured to match or exceed original equipment specifications, ensuring an exact fit and long-lasting durability for your car's drivetrain.