Cupra

Welcome to your drivetrain specialist for Cupra. As an experienced Swedish expert, we offer a comprehensive range of high-quality components for the Cupra Formentor, Leon and Ateca....

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Cupra

109 products
49 - 72 of 109
Item no.:2133734
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 589 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 119 mm
Item no.:312296
  • Position: Front
  • Splines wheel side: 36
  • Total length: 480 mm
  • Joint diameter: 110 mm
  • ABS teeth: 28
Item no.:2104725
  • Position: Front right
  • Splines gearbox side: 33
  • Splines wheel side: 36
  • Total length: 803 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:344798
  • Position: Front, Inner
  • Inner splines: 32
  • Seal diameter: 39,9 mm
  • Total length: 163,5 mm
  • Outer splines: 33
Item no.:647209
  • Position: Rear, Inner
  • Inner splines: 33
  • Splines gearbox side: 37
  • Seal diameter: 40 mm
  • Total length: 152,5 mm
Item no.:346591
  • Position: Front, Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 107 mm
Item no.:346429
  • Position: Front, Inner
  • Inner splines: 33
  • Total length: 31,8 mm
Item no.:0411557
  • Position: Inner
  • Inner splines: 28
  • Total length: 32 mm
Item no.:345673
  • Position: Front, Inner
  • Inner splines: 28
  • Splines gearbox side: 40
  • Seal diameter: 46,9 mm
  • Total length: 104 mm
Item no.:350187
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:517420
  • Position: Rear right
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 840 mm
Item no.:417816
  • Position: Rear left
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 611 mm
Item no.:0655481
  • Total length: 127 mm
Item no.:0642428
  • Position: Front
Item no.:2143949
  • Position: Front right
  • Splines gearbox side: 40
  • Splines wheel side: 36
  • Total length: 817 mm
Item no.:1100081
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 570 mm
Item no.:1120491
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 562 mm
  • Joint diameter: 98 mm
Item no.:142486
  • Position: Front left, Inner
  • Inner splines: 34
  • Seal diameter: 34,5 mm
  • Total length: 148 mm
  • Joint diameter: 85 mm
Item no.:2148050
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 929 mm
Item no.:346720
  • Position: Front, Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:511510
  • Position: Rear right
  • Splines wheel side: 36
  • Inner splines: 33
  • Total length: 650 mm
  • Diameter 1: 83 mm
Item no.:0461850
  • Position: Front right, Inner
  • Inner splines: 34
  • Seal diameter: 40 mm
  • Outer splines: 37
Item no.:410373
  • Position: Rear left
  • Splines gearbox side: 40
  • Splines wheel side: 36
  • Total length: 611 mm
  • Diameter 1: 83 mm
Item no.:0483076
  • Position: Inner
  • Inner splines: 33
  • Splines gearbox side: 36
  • Seal diameter: 59,5 mm
  • Total length: 79 mm
Showing 49–72 of 109 products

Drivetrain for Cupra

Cupra has quickly established itself as a brand that combines sporty performance with modern technology from the Volkswagen Group. To maintain this dynamic driving experience, a drivetrain in top condition is essential. The power transmission in a Cupra is engineered to handle high torque and deliver immediate response, whether in a front-wheel-drive Leon or an all-wheel-drive Formentor. As a drivetrain specialist, we understand the specific demands placed on these components in performance cars. We offer everything from complete drive shafts to specialised CV boots that protect sensitive joints against dirt and moisture.

Maintaining the drivetrain is vital for both safety and driving comfort, as worn parts can quickly lead to consequential damage to the gearbox and suspension. By choosing the right spare parts, you ensure that your car's power reaches the road effectively and under control. Our range is carefully selected to meet the high standards Cupra owners place on durability and precision, allowing you to enjoy your car's full potential without compromise.

How the drivetrain differs between Cupra models

The Cupra model range spans several different technical platforms, meaning substantial variations in drivetrain design. Models such as the Cupra Ateca and certain versions of the Formentor use the advanced 4Drive system, requiring a robust propeller shaft to transfer power to the rear wheels. This system places higher demands on how components interact compared to purely front-wheel-drive variants. Conversely, the Cupra Leon often focuses on efficient front-wheel drive where driveshaft angles and strength are optimised for sporty handling and rapid acceleration from a standstill.

The all-electric Cupra Born introduces an entirely different architecture with rear-wheel drive and direct-drive electric motors, which place new demands on the torsional stiffness of drive shafts due to instant torque delivery. Differences in ride height between an SUV like the Ateca and a lower Leon also noticeably affect drive shaft length and constant velocity joint operating angles. It is therefore crucial to select parts tailored exactly to your model's specific drivetrain layout and engine variant to prevent vibrations and premature wear. We help you navigate these technical differences so you always get the right part for your specific car.

Common faults and symptoms

There are several clear signs that a component in your Cupra drivetrain is beginning to fail. One of the most common symptoms is a clicking or knocking sound on full steering lock, which usually points to a worn outer CV joint. If you instead experience vibrations through the body shell during acceleration, especially at higher speeds, a worn inner CV joint is often the culprit. These vibrations may be subtle initially but tend to increase in intensity as wear progresses, negatively affecting vehicle stability and comfort.

For all-wheel-drive models, imbalance or abnormal noise from underneath the car can indicate issues with the propeller shaft or its centre bearing. It is also essential to inspect the CV boots regularly; a split boot allows dirt to enter and grease to escape, which rapidly destroys the joint through increased friction and heat. By acting promptly on these symptoms, you can often replace an individual component rather than the entire drive shaft, saving both time and money in the long run. Ignoring these warning signs can result in complete breakdown on the road.

Popular Cupra models to explore

Continue to the right model or component category for Cupra:

On a broad brand page, the priority is quickly finding the right combination of model and component area. Starting from one of the most common Cupra model or category links makes it straightforward to navigate to a page offering exact fitment and relevant products.

Selecting your model above ensures that search results match your vehicle's technical specifications precisely. This is the first step towards a successful repair with guaranteed fitment.

How to find the right part for your Cupra

Identifying the correct part for a modern car like a Cupra can be challenging due to frequent technical revisions and multiple engine options within the same model year. The most reliable method is selecting your car's make, model and engine variant in our search filter. This matches your vehicle's exact specifications with our extensive database of compatible parts. When searching for a Cupra drive shaft, be sure to check whether your car has a manual or DSG automatic gearbox, as this often affects overall shaft length and the gearbox-side connection.

For all-wheel-drive models, you must also confirm whether the part is intended for the front or rear axle, as dimensions differ considerably. If you are unsure which component is failing, we recommend visually inspecting the existing parts for grease leaks or mechanical play before ordering. Our aim is to help you pick the right part first time without fuss, and our database is continuously updated to cover the latest Cupra models and their specific replacement part requirements. With the correct technical information, repairs are both simpler and more cost-effective.

Why shop with CVJoint24

As a Swedish driveline specialist shipping across the EU, we provide a unique combination of technical expertise and parts availability for Cupra owners. We understand that your Cupra is more than just everyday transport – it is a vehicle engineered for driving enjoyment and performance. That is why we stock only car parts that satisfy our rigorous standards for quality and precision fitment. With our fitment guarantee, you can order with complete confidence, knowing the part will fit when chosen via our make, model and engine search.

We dispatch fast from our central Swedish warehouse, helping you get your car back on the road without unnecessary delay. We are your dedicated partner for all power transmission requirements, and our customer service team is always available to assist with technical queries regarding any specific part. By choosing a specialist dedicated entirely to driveline components, you benefit from a deeper catalogue and greater expertise than general motor factors provide. Always the right part, delivered straight to your door.

Frequently Asked Questions about Cupra Drivetrain Parts

How do I know if my Cupra needs a new drive shaft?

Common signs include vibrations during acceleration or clicking noises when cornering. If you notice grease on the inside of the wheel rim, a split CV boot may have led to drive shaft damage.

Do all Cupra drive shafts fit regardless of the gearbox?

No, there is a significant difference between drive shafts for manual gearboxes and DSG automatics. Always select your vehicle make, model and engine to ensure the correct fit for your gearbox type.

What is the difference between the inner and outer CV joint on a Cupra?

The outer CV joint sits at the wheel and typically causes noises when turning. The inner CV joint sits by the gearbox and usually causes vibrations through the car under load.

Does the Cupra Formentor always have a propeller shaft?

Only Cupra Formentor models equipped with 4Drive (all-wheel drive) have a propeller shaft. Front-wheel-drive versions do not feature this component.

Can I replace just the CV boot on my Cupra?

Yes, if you catch the damage early and the joint is still clean and properly lubricated, you can replace just the CV boot to extend the service life of the CV joint.

Do you offer a fitment guarantee on Cupra parts?

Yes, we offer a fitment guarantee when you select your specific Cupra make, model and engine variant, ensuring that the part is fully compatible with your vehicle.