Dacia Sandero

Spare parts and drivetrain components for the Dacia Sandero.

Products for Dacia Sandero

62 products
49 - 62 of 62
Item no.:391446
  • Position: Front
  • Inner diameter: 35 mm
  • Outer diameter: 62 mm
  • Height: 14 mm
Item no.:2185967
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 896 mm
  • Joint diameter: 82,5 mm
Item no.:112142
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 628 mm
  • Joint diameter: 90 mm
Item no.:210986
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 23
  • Total length: 895 mm
  • Diameter 1: 79 mm
Item no.:312132
  • Position: Front left
  • Joint diameter: 76 mm
  • Joint diameter, gearbox side: 72 mm
  • Thread size: M20x1.5
Item no.:256468
  • Position: Front right, Outer
  • Inner splines: 22
  • Splines wheel side: 22
  • Seal diameter: 49 mm
  • Thread size: 23
Item no.:0650004
  • Total length: 108 mm
Item no.:0685271
  • Total length: 115 mm
Item no.:0694627
  • Position: Rear
  • Total length: 100 mm
Item no.:148381
  • Position: Front left, Inner
  • Inner splines: 22
  • Splines gearbox side: 26
  • Seal diameter: 40 mm
  • Outer diameter: 75 mm
Item no.:0623292
  • Total length: 100 mm
Item no.:0980416
  • Inner diameter: 27 mm
  • Outer diameter: 56 mm
Item no.:0620192
  • Outer diameter: 19 mm
  • Diameter: 68 mm
Item no.:353015
  • Position: Front, Outer
  • Inner splines: 28
  • Seal diameter: 49 mm
  • Outer splines: 23
  • Thread size: M20X1,5
Showing 49–62 of 62 products

Dacia Sandero drivetrain

The Dacia Sandero is a car praised for its practicality and running economy, but maintaining these qualities requires a properly functioning drivetrain. The drivetrain is the system that transfers power from the engine through the gearbox out to the road wheels, allowing the vehicle to move forward. For a model like the Sandero, which is frequently used in urban driving and for daily commuting, components face continuous wear through repeated stopping, starting and cornering. Investing in the right spare parts is vital to avoid costly secondary damage to other driveline parts.

With us, you will find a specialist range tailored specifically to this model. We focus on supplying parts that meet or exceed original equipment specifications, giving you complete peace of mind as a car owner. By sourcing components from a dedicated specialist, you ensure an exact fit, making installation straightforward and extending the service life of your car's mechanical components.

How the drivetrain is configured on the Dacia Sandero

The Dacia Sandero features a front-wheel-drive layout with a transversely mounted engine. This means power is delivered from the gearbox to the front wheels via two drive shafts of differing lengths. This setup is efficient and compact, but it places significant demands on each drive shaft to accommodate both steering angles and suspension travel. Every drive shaft is fitted with two joints: an inner CV joint located closest to the gearbox, and an outer CV joint situated at the wheel hub.

The outer CV joint is particularly vulnerable because it must cope with sharp articulation angles whenever you steer. To protect these precision components, they are encased in CV boots packed with specialised grease. If a boot splits, road dirt and moisture penetrate, rapidly destroying the constant velocity joint. Understanding this assembly highlights why inspecting your drivetrain condition regularly is essential for overall vehicle health and road safety.

Common faults and symptoms

Several clear signs indicate that drivetrain components on your Dacia Sandero are wearing out. One of the most typical symptoms of a failing outer CV joint on a Dacia Sandero is a rhythmic clicking or knocking noise when cornering on full lock while accelerating, such as when executing a parking manoeuvre. If the noise subsides when driving straight, this is a textbook indicator that the outer joint is worn out.

Vibrations felt through the steering wheel or throughout the car under acceleration often point to a worn inner joint or an unbalanced or bent Dacia Sandero drive shaft. It is also important to watch for grease splatters on the inside of the wheel rim or around the wheel arch, which indicate a split CV boot. If caught early, replacing only the boot may resolve the issue, but if dirt has already contaminated the joint, a complete replacement is usually necessary to restore proper function.

Common replacement parts for the Dacia Sandero

Depending on driving style and mileage, certain components on a Sandero need replacing more frequently than others. In our model-specific range, we stock items covering the most common driveline requirements. We have organised these into distinct categories so you can find the right match quickly:

  • Drive shafts: We supply a wide selection of complete drive shafts, engineered for various engine variants and gearboxes.
  • Outer CV joints: We stock outer constant velocity joints that are critical for vehicle steering and delivering power at the road wheels.

Fitting a complete drive shaft gives you an all-in-one solution where both inner and outer joints, as well as the CV boots, are factory-assembled and ready to fit. This is often the most time-efficient method for garage repairs. If only the wheel-end component is damaged, a standalone CV joint can be a more economical alternative. Here are the categories available for your vehicle:

  • Drive shafts for Dacia Sandero
  • Outer CV joints for Dacia Sandero

How to find the right part for your Dacia Sandero

Navigate directly to the appropriate category for your Dacia Sandero:

On a vehicle with several possible driveline issues, it pays to begin in the correct category straight away. By comparing the dedicated product groups for the Dacia Sandero, it becomes straightforward to distinguish between drive shaft, CV joint or propeller shaft issues, leading you to the section that best matches your symptoms and fitment.

Finding the correct replacement part for your Dacia Sandero does not have to be difficult. Because specifications vary depending on engine variant, transmission type (manual or automatic) and model year, the most reliable method is to select your vehicle by make, model and engine. By choosing your car's details in our selector, we filter out incompatible components and display only products engineered to fit your specific car. This avoids incorrect purchases and saves valuable installation time.

When selecting parts, check whether your vehicle is fitted with ABS, as certain CV joints and driveshafts feature integrated ABS rings. Our catalogue takes these technical details into account. If you are unsure whether you require a complete shaft or merely a joint, we advise inspecting the existing part on the car first. A visual check of the boot condition and listening carefully for telltale noises are the best ways to determine which spare parts need replacing.

Why buy from CVJoint24?

CVJoint24 is your dedicated partner for Dacia Sandero drivetrain components. As the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden, we focus exclusively on driveline systems. This gives us specialised technical expertise and comprehensive product coverage that general car parts stores often lack. We know that accurate fitment is paramount, which is why we only stock components manufactured to rigorous standards. Our aim is to supply car parts that keep your vehicle running smoothly for thousands of trouble-free kilometres.

When you order from us, you get the right products alongside the reliability of an experienced European specialist providing responsive technical customer support. With our intuitive model selector and dedicated focus on drivetrain technology, you can be confident of receiving the correct car parts promptly. We combine specialised knowledge with extensive stock to ensure a first-class experience whenever you service your Dacia Sandero.

Frequently Asked Questions about Dacia Sandero Drivetrain - High-Quality Spare Parts

How do I know whether to replace the complete drive shaft or just the CV joint on my Sandero?

If both the inner and outer joints show signs of wear, or if the shaft itself is corroded or damaged, a complete drive shaft is the best choice. If the noise only occurs while cornering, it is usually only the outer CV joint that needs replacing.

Do all drive shafts fit every Dacia Sandero model?

No, drive shafts vary depending on engine size, gearbox type and whether the car has ABS. Always select your vehicle's make, model and engine in our parts finder to locate the exact match for your car.

What are the most common signs of a failing outer CV joint?

The most common symptom is a clicking noise when turning whilst accelerating. You may also spot grease flung onto the inside of the wheel if the CV boot has split.

Why is it important to replace a damaged CV boot immediately?

The CV boot protects the CV joint from dirt, grit and water. If it splits, lubricating grease escapes and road dirt gets in, destroying the constant velocity joint in a very short time.

Can I replace the drive shaft on my Dacia Sandero myself?

Yes, it is achievable for a confident DIY mechanic with the right tools, but it involves dismantling suspension components and sometimes draining the gearbox oil. We recommend consulting a workshop manual or seeking professional assistance if you are unsure.

How many drivetrain products do you offer for the Dacia Sandero?

We currently offer 15 matching products in our range for Dacia Sandero, including 13 drive shafts and 2 outer CV joints.