Daewoo Leganza

Car parts and drivetrain components for Daewoo Leganza.

Products for Daewoo Leganza

4 products
1 - 4 of 4
Item no.:0561454
  • Position: Outer
  • Seal diameter: 52 mm
  • Inner splines: 29
  • Outer splines: 33
  • Joint diameter: 84 mm
Item no.:0379266
  • ABS teeth: 47
  • Inner diameter: 74 mm
  • Outer diameter: 84 mm
  • Width: 8 mm
Item no.:335581
  • Position: Front
  • ABS teeth: 47
  • Inner diameter: 74 mm
  • Outer diameter: 84 mm
  • Width: 8 mm
Item no.:0526049
  • Position: Outer
  • ABS teeth: 47
  • Seal diameter: 52 mm
  • Inner splines: 29
  • Outer splines: 33

Frequently Asked Questions about Daewoo Leganza Drivetrain Parts – Perfect Fit Components

How do I know if my Daewoo Leganza needs a new outer CV joint?

The most common symptom is a clicking noise from the front suspension when making sharp turns under acceleration. If the sound disappears when driving in a straight line, it is a clear sign that the outer joint is worn.

Why is the ABS warning light on in my Leganza?

On the Daewoo Leganza, this is often caused by a cracked or corroded ABS ring. The ring is mounted on the drive shaft; if it becomes damaged, the sensor cannot read wheel speed correctly, triggering the warning light.

Can I replace just the ABS ring, or do I have to replace the whole CV joint?

It is often possible to replace just the ABS ring if the CV joint itself is still in good condition. This is a cost-effective repair that we support at CVJoint24 by supplying individual reluctor rings.

Do all CV joints fit all Leganza models?

No, there are variations depending on the model year and engine. It is essential to check the spline count (teeth) on both the inner and outer sections of the joint. Select your exact model and engine to find the correct match.

What happens if a CV joint fails completely while driving?

If a CV joint suffers complete failure, power can no longer be transmitted to the wheel. The car will lose drive entirely, leaving you stranded, which can be dangerous at higher speeds.

How often should I inspect the drive shaft boots?

We recommend inspecting the CV boots at every oil change or service. A split boot lets grease escape and allows road dirt in, which will ruin the CV joint in very short order.