Daihatsu Hijet Van

Welcome to CVJoint24, the international shop of a Swedish driveline specialist supplying quality parts for the Daihatsu Hijet Van. We appreciate the importance of exact fitment for this...

Products for Daihatsu Hijet Van

6 products
1 - 6 of 6
Item no.:0509134
  • Position: Outer
  • Inner splines: 19
  • Splines wheel side: 24
  • Seal diameter: 40 mm
  • Outer splines: 24
Item no.:629159
  • Total length: 445 mm
Item no.:628325
  • Total length: 498 mm
Item no.:625188
  • Total length: 516 mm
Item no.:622512
  • Total length: 626 mm
Item no.:623703
  • Total length: 641 mm
  • Outer diameter 1: 50 mm
  • Bolt circle diameter 1: 80,6 mm
  • Outer diameter 2: 30 mm

Drivetrain for Daihatsu Hijet Van

The Daihatsu Hijet Van is a distinctive, compact commercial vehicle that requires specific components to maintain its reliability and performance under tough working conditions. The drivetrain is central to the vehicle’s ability to transport cargo efficiently, especially in urban environments involving frequent start-stop driving and tight turns. As a Swedish specialist in drivetrain components, we offer a carefully selected range tailored specifically to this model. Maintaining the drivetrain on a Hijet Van is essential not only for vehicle performance, but also for safety and long-term cost efficiency for your business or project. Choosing the right spare parts ensures that engine power is transferred smoothly to the wheels without loss, vibration or unwanted noise. We possess in-depth technical knowledge of Daihatsu specifications and can help you select the exact parts needed to keep your vehicle running reliably for years to come.

How the drivetrain is engineered on the Daihatsu Hijet Van

The drivetrain configuration of the Daihatsu Hijet Van is optimised for its compact chassis and its practical role as an agile load carrier. Power is typically transmitted via a manual or automatic gearbox to a propeller shaft, which carries drive to the rear axle—a proven, robust layout for rear-wheel-drive utility vehicles. This setup places high demands on prop shaft balance, universal joints and centre bearings. At the wheels, CV joints allow for angular movement during steering and suspension travel, which is vital for manoeuvrability in confined spaces. For the Hijet Van, it is especially important that these components are built to withstand the point loads generated when carrying full cargo over uneven surfaces. Because these vans often undertake commercial duties with numerous short journeys, wear on these components is frequently higher than on a conventional passenger car. Understanding the interaction between the propeller shaft and the outer CV joints helps you quickly diagnose mechanical issues before they lead to complete failure.

Common faults and symptoms

There are several clear warning signs indicating that your Daihatsu Hijet Van drivetrain requires attention from a garage or a thorough inspection by a DIY mechanic. One of the most common symptoms is a rhythmic clicking or knocking sound on full steering lock under acceleration, which almost always points to a worn outer CV joint or a split CV boot. Vibrations felt throughout the body or in the seat, particularly at certain speeds, can typically be traced to imbalance, play in the universal joints or wear in the propeller shaft centre bearing. If you notice driveline shudder or a metallic clonk when changing gear or lifting off the accelerator, the propeller shaft mountings may be wearing out. It is crucial to address these symptoms promptly to avoid secondary damage to the gearbox and differential. Regularly checking that CV boots remain intact and free from grease leaks will help prevent major driveline failures and keep your van operating safely.

Common replacement parts for Daihatsu Hijet Van

Within our dedicated range for the Daihatsu Hijet Van, certain components are frequently required to keep these vehicles in daily service. The propeller shaft is often replaced after years of hard work, and we stock five distinct variants to cater for different configurations and wheelbases. Another critical component is the outer constant velocity joint, which is constantly exposed to road dirt, moisture and grit inside the wheel arches.

  • Outer CV joints for Daihatsu Hijet Van – essential for ensuring smooth steering response and dependable power transfer to the wheels where applicable.
  • Propeller shafts for Daihatsu Hijet Van – we supply balanced, ready-to-fit prop shafts that provide reliable drive to the rear axle.
These parts are carefully chosen for their durability and exact fit, matching the exacting standards of our Daihatsu catalogue. Choosing the correct prop shaft is vital, and we can help you verify the proper length and flange specifications for your Hijet.

Finding the right part for your Daihatsu Hijet Van

Navigate to the relevant category for your Daihatsu Hijet Van:

When dealing with driveline issues, selecting the correct category from the start saves time. By comparing the exact sections for the Daihatsu Hijet Van, you can differentiate between faults in the drive shaft, CV joint or propeller shaft and proceed directly to the parts matching your symptoms and specifications.

Locating the exact replacement part for a specialist model such as the Daihatsu Hijet Van can sometimes be difficult on the wider aftermarket. At CVJoint24, our catalogue allows you to filter parts quickly by selecting your vehicle’s make, model and engine variant. Filtering by these specifications narrows down our range so you only see parts verified for your exact van, eliminating guesswork and reducing ordering errors. We also recommend checking specific technical details, such as spline counts and overall lengths, when multiple versions exist for the same model year. Our customer support team consists of drivetrain specialists ready to assist if you need advice on the correct prop shaft or CV joint for your configuration. Here are the primary categories for your vehicle:

  • Outer CV joint
  • Propeller shaft
These links take you straight to the corresponding subcategory for your Daihatsu.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across Europe from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with a comprehensive stocked inventory, making us a dependable choice for both private owners and professional garages maintaining the Daihatsu Hijet Van. When you purchase from us, you receive high-quality car parts supported by our reliable fitment guarantee. Our aim is to help you select the correct part first time, offering premium components at competitive prices. With efficient warehouse operations and rapid EU-wide shipping, we help minimise vehicle downtime. Our drivetrain components are thoroughly tested to withstand demanding commercial use and heavy loads, ensuring dependable durability for your Daihatsu.

Frequently Asked Questions about Drivetrain for Daihatsu Hijet Van

How do I know which propeller shaft fits my Daihatsu Hijet Van?

The easiest way is to select your vehicle's make, model, and engine variant in our store. Because several propeller shaft versions exist for the Hijet Van depending on wheelbase and model year, choosing your exact model details ensures you receive the correct length and flange fitment.

What are the most common signs of a failing outer CV joint?

The most common symptom is a clicking or knocking noise when taking sharp turns, especially under acceleration. You should also check whether the CV boot is intact, as a split boot quickly lets dirt penetrate and destroys the constant velocity joint.

Do the CV joint kits contain everything needed for replacement?

Yes, our outer CV joint kits for the Daihatsu Hijet Van are normally supplied complete with the joint itself, a model-specific CV boot, high-quality grease, and all necessary circlips and clamps for professional fitting.

Why does the vehicle vibrate at speeds over 70 km/h?

Severe vibrations at higher speeds are often caused by an imbalanced propeller shaft or worn universal joints. On a Daihatsu Hijet Van, the prop shaft is a critical part of the drivetrain that handles substantial loads, and wear here can often be felt clearly throughout the entire vehicle.

Can I replace just the universal joint, or must the entire propeller shaft be replaced?

That depends on the design of the propeller shaft. In many cases, replacing the complete prop shaft is safer and more cost-effective, as you also benefit from freshly balanced tubing and a new centre bearing, ensuring vibration-free operation.

How fast is delivery for Daihatsu drivetrain parts?

We aim to dispatch all in-stock parts the same day the order is placed. Dispatched directly from our Swedish central warehouse, this ensures reliable, swift delivery of your Daihatsu Hijet Van spare parts across the EU.