Drive shafts for BMW 2 Gran Tourer

Looking for a premium drive shaft for your BMW 2 Gran Tourer? As Swedish driveline specialists, CVJoint24 stocks a carefully curated selection of drive shafts tailored to your car's...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for BMW 2 Gran Tourer

36 products
25 - 36 of 36
Item no.:0189183
  • Splines gearbox side: 24
  • Splines wheel side: 31
  • Total length: 533 mm
Item no.:2111301
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
Item no.:2183450
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 904 mm
Item no.:612318
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 731 mm
Item no.:113722
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Item no.:217293
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 905 mm
  • Joint diameter: 92 mm
Item no.:216090
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:0188405
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 545 mm
Item no.:114270
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Item no.:210229
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:0153961
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 545 mm
Item no.:118963
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Showing 25–36 of 36 products

Drive shafts for BMW 2 Gran Tourer

The BMW 2 Gran Tourer is a versatile vehicle that places high demands on its driveline to maintain the driving dynamics and stability for which the brand is renowned. The drive shaft is a vital component in this system, tasked with transferring torque directly from the gearbox to the wheels. For a family car that is frequently heavily laden, keeping these components in top condition is essential for both safety and comfort on the road. We stock a comprehensive range of drive shafts specifically engineered to satisfy the technical demands of the BMW 2 Gran Tourer, whether your car is front-wheel drive or equipped with four-wheel drive.

Choosing the correct replacement car parts for a modern vehicle demands precision. Because the BMW 2 Gran Tourer comes in various specifications with differing engine options and gearboxes, drive shaft measurements vary accordingly. We focus on supplying parts that not only fit physically, but also match original equipment standards. By choosing a model-matched drive shaft, you ensure your car retains its composed handling while minimising the risk of consequential damage to other driveline components.

What does a drive shaft do on a BMW 2 Gran Tourer?

The primary role of the drive shaft on a BMW 2 Gran Tourer is to act as the direct mechanical link between the engine and the road. Once the engine generates power and delivers it through the gearbox, the driveshaft steps in to turn the road wheels. It does this via a sophisticated assembly containing both inner and outer CV joints, allowing the shaft to articulate smoothly with suspension movement and turn alongside the steered wheels. Without a sound drive shaft the car simply cannot move, and a worn shaft can lead to uneven power delivery or complete driveline failure.

For the BMW 2 Gran Tourer, which commonly handles long motorway journeys as well as urban stop-start traffic, the driveshaft's ability to cope with varied loads is essential. It must handle brisk acceleration and sustained cruising speeds without inducing vibration or unwanted noise. A sound drive shaft provides smoother running and curbs premature wear on tyres and suspension components, saving you money on future maintenance and garage repairs.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your BMW 2 Gran Tourer is worn or failing. One of the most frequent warnings is a noticeable vibration through the steering wheel or car floor under acceleration. This vibration typically points to an unbalanced shaft or excessive play in the inner constant velocity joint. If the vibration intensifies as road speed rises, the shaft should be inspected promptly to prevent a complete breakdown.

Another classic symptom is a distinct clicking or knocking noise when taking sharp turns at low speeds. This noise usually originates from the outer CV joint after grease has leaked out through a split CV boot, allowing grit to enter and erode the internal bearing surfaces. Spotting grease flung across the inside of the wheel rim or wheel arch is a clear sign of a torn boot, which almost inevitably requires replacing the entire drive shaft or joint assembly if neglected.

Choosing the correct drive shaft

Pinpointing the exact drive shaft for your BMW 2 Gran Tourer is vital for a hassle-free repair. Multiple details matter, including the fitting side (left or right), whether your car has a manual or automatic gearbox, and which engine variant is fitted. Because BMW tailors its drivetrains to specific performance outputs, total length and spline tooth counts can differ across model years and trims.

The most dependable way to identify the correct part is to select your car's make, model and engine in our site search. This filters our catalogue down to components engineered specifically for your vehicle, eliminating the hassle of ordering an incorrect part and saving you valuable workshop time. It is also worth checking whether the complete driveshaft assembly requires renewal or if fitting an individual joint will suffice, depending on the extent of wear.

Related parts to check

Be sure to inspect these related pages for the same vehicle when working on the drive shaft:

When one driveline component develops wear, adjoining parts often need attention as well. By checking these specific categories for the BMW 2 Gran Tourer, you can easily determine whether an issue lies with the drive shaft itself or with an adjacent section of the drivetrain.

This is particularly important on models where vibrations, play and knocking sounds can travel between multiple drivetrain components. A swift check of related categories helps prevent replacing the right type of part while missing an adjacent worn component causing the same symptoms.

Ensuring both the inner and outer CV joints are in sound condition maximises the service life of your replacement drive shaft and keeps your car reliable.

Why buy from CVJoint24?

CVJoint24 is your dedicated partner for premium driveline components across Europe. As Swedish driveline specialists shipping from our Helsingborg warehouse, we concentrate solely on drivetrain parts, giving us in-depth expertise that general motor factors rarely match. We combine focused knowledge with a broad inventory designed to satisfy the needs of BMW owners. With our precise model selection, you can order with total confidence knowing your parts will match your car's factory specifications.

We know that when a car part fails, you need a replacement without delay. We dispatch quickly from our Swedish stock so your BMW 2 Gran Tourer can get back on the road promptly. At CVJoint24 you always get dependable quality at a fair price, backed by the peace of mind of dealing with dedicated driveline specialists. Our objective is to make sourcing top-grade parts straightforward and dependable for every DIY mechanic and professional garage.

Frequently Asked Questions about Drive Shafts for BMW 2 Gran Tourer

How do I know if the drive shaft on my BMW 2 Gran Tourer is faulty?

The most common signs are vibrations under acceleration, clicking noises when cornering, or grease splattered on the wheels. If you notice shaking through the steering wheel, you should inspect the drive shafts straight away.

Can I replace just a CV joint instead of the entire drive shaft?

Yes, on the BMW 2 Gran Tourer it is often possible to replace either the inner or outer CV joint separately if the shaft itself is undamaged. We supply both complete driveshafts and individual joints.

Does the same drive shaft fit both the right and left sides?

Usually not. On most BMW 2 Gran Tourer models, the right and left drive shafts differ in length and design. Always check the specification for the respective side before purchasing.

What is included when I buy a drive shaft from you?

Our complete drive shafts are supplied fully assembled with inner and outer CV joints as well as CV boots, ready for direct installation on your vehicle.

How does a split CV boot affect the drive shaft?

A split boot allows the lubricating grease to escape while dirt and moisture enter the CV joint. This rapidly causes accelerated wear, ultimately leading to joint and drive shaft failure.

Do you offer a guaranteed fit for BMW drive shafts?

Yes, we guarantee a correct fit when you select your vehicle by make, model and engine variant. This ensures you receive a drive shaft precisely tailored to your BMW 2 Gran Tourer.