Drive shafts for BMW 5

Looking for a high-quality drive shaft for BMW 5? At CVJoint24, you will find an extensive range tailored to your vehicle's exact drivetrain setup. Choosing the correct component is...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for BMW 5

174 products
121 - 144 of 174
Item no.:1154503
  • Position: Front left
  • Splines gearbox side: 30
  • Splines wheel side: 37
  • Total length: 564 mm
Item no.:115220
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 573 mm
  • Joint diameter: 88 mm
Item no.:7302854
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 873 mm
  • Joint diameter: 88 mm
Item no.:612663
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:611161
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 660 mm
  • Joint diameter, gearbox side: 100 mm
  • Flange diameter: 100 mm
Item no.:614159
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 653 mm
  • Joint diameter: 95 mm
  • Joint diameter, gearbox side: 106 mm
Item no.:616701
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 670 mm
  • Joint diameter, gearbox side: 104 mm
Item no.:117893
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 611 mm
  • ABS teeth: 48
Item no.:218018
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 930 mm
  • ABS teeth: 48
Item no.:2177420
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 932 mm
  • ABS teeth: 48
Item no.:1129318
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 610 mm
  • ABS teeth: 48
Item no.:411636
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 764 mm
  • Joint diameter: 87,8 mm
Item no.:516991
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 815 mm
  • Joint diameter: 87,8 mm
Item no.:511715
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 829 mm
  • Joint diameter: 94 mm
Item no.:516244
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 819 mm
  • Joint diameter: 96 mm
Item no.:411979
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 765 mm
  • Joint diameter: 96 mm
Item no.:410465
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 758 mm
  • Joint diameter: 88 mm
Item no.:518562
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 811 mm
  • Joint diameter: 88 mm
Item no.:411480
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 767 mm
  • Joint diameter: 94 mm
Item no.:511766
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 823 mm
  • Joint diameter: 94 mm
Item no.:1177265
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 573 mm
  • Joint diameter: 88 mm
Item no.:7302856
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 873 mm
  • Joint diameter: 88 mm
Item no.:616379
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:619657
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 660 mm
  • Joint diameter, gearbox side: 100 mm
  • Flange diameter: 100 mm
Showing 121–144 of 174 products

Drive shafts for BMW 5

Owning a BMW 5 often means valuing a blend of performance, comfort, and engineering brilliance. To preserve these qualities, the car's power transmission must function flawlessly. A drive shaft for BMW 5 is far from a simple metal bar; it is a precision component engineered to withstand massive torque and continually changing angles while driving. With multiple variants in our range, we cover a broad spectrum of models, from classic rear-wheel-drive editions to modern xDrive all-wheel-drive systems. Every drive shaft is carefully selected to meet or exceed original equipment specifications, ensuring your car retains its characteristic driving dynamics. As a dedicated Swedish driveline specialist, we understand the importance of supplying parts that fit first time. Thanks to our focus on quality and depth of stock, we provide solutions for virtually every engine variant and model year across the 5 Series. Choosing a drive shaft from us is an investment in long-term durability and operational reliability, helping you prevent costly consequential damage to other drivetrain components.

What does a drive shaft do on a BMW 5?

The drive shaft on a BMW 5 performs the vital task of transferring engine power from the differential to the road wheels. While simple in theory, in practice it demands sophisticated engineering to cope with extreme mechanical stresses. On rear-wheel-drive BMW 5 models, the drive shafts sit at the rear axle, whereas xDrive variants also feature front drive shafts to deliver four-wheel drive. A complete drive shaft assembly comprises a central shaft with constant velocity joints at each end. The inner CV joint, closest to the gearbox or differential, accommodates axial plunge as the suspension articulates. The outer CV joint, mounted at the wheel hub, allows the front wheels to steer while suspension travels up and down, ensuring smooth and uninterrupted power delivery. For any BMW 5 owner, this setup sits at the very heart of the car's handling balance. If a drive shaft wears or fails, the direct connection between throttle pedal and tarmac is compromised, spoiling your driving experience. Power transmission must remain smooth and vibration-free to preserve the refined feel expected of the marque. Understanding the role of the driveshaft makes it much easier to spot early warning signs and rectify issues before they cause complete mechanical failure.

Common symptoms of wear

Several clear symptoms indicate that a drive shaft on your BMW 5 is failing or worn out. One of the most prevalent is a rhythmic clicking or knocking noise heard when turning tightly at low speeds, such as during parking manoeuvres. This almost always points to a worn outer CV joint, frequently caused by a split CV boot that has allowed dirt ingress and lost lubrication. Another tell-tale sign is a pronounced vibration felt through the car body under acceleration. These vibrations typically originate from play in the inner CV joint, acting as an imbalance that disappears as soon as you lift off the accelerator. You should also inspect for grease splattered over the inside of the wheel rim or wheel arch, a definite symptom of a torn drive shaft boot. Once the grease escapes, lubrication is lost, and the constant velocity joint will rapidly overheat and wear out. On BMW 5 models equipped with xDrive, subtle driveline jerking or hesitation under acceleration can also indicate developing wear in the front drive shafts. Ignoring these warnings can lead to a snapped shaft, leaving you stranded without drive and risking severe collateral damage to your suspension or gearbox.

How to choose the correct drive shaft

Selecting the right drive shaft for BMW 5 might seem daunting given the numerous variants, but with our vehicle selector it is straightforward. Simply choose your car's make, model, and engine variant to filter the correct options. Because the BMW 5 covers such a wide array of engines, gearboxes, and drivetrain configurations, drive shafts vary significantly in overall length, shaft diameter, and spline count. Splines are the precision-machined teeth at each end of the shaft that engage with the wheel hub and the differential; if the tooth count differs even slightly, the part cannot be fitted. You must also check whether your specific vehicle requires ABS reluctor rings on the drive shaft. Furthermore, installation position is crucial: drive shafts are virtually always specific to either the left-hand or right-hand side, as well as front or rear axles. By selecting your exact engine and model details, we display only the parts engineered to fit your car. We always recommend cross-referencing critical specifications in the product details, such as compressed length, to be entirely confident. Backed by our fitment guarantee, you can rest assured you are getting the correct part first time.

Related components to inspect

We recommend checking these exact pages for your vehicle when working on the drive shaft:

When a driveline component shows signs of wear, related parts on the same car often require attention too. By comparing these dedicated pages for BMW 5, it is easier to determine whether a fault lies within the drive shaft itself or in an adjacent section of the drivetrain.

This is especially important on models where vibrations, play, and noises can travel across multiple components within the same driveline. A quick inspection of related categories reduces the risk of replacing one part whilst overlooking a neighbouring component that contributes to the very same problem.

When replacing a drive shaft, it is good workshop practice to inspect adjacent transmission components to ensure a dependable, long-term repair. Often, wear on one shaft suggests that other driveline parts have covered the same mileage and are nearing the end of their service life. Pay close attention to the CV boots on the opposite side of the vehicle, as rubber boots deteriorate at a similar rate. For BMW 5 owners, it is also sensible to inspect the propeller shaft and centre bearing, especially if persistent vibrations remain noticeable. Here is an overview of related categories essential to your car's drivetrain:

  • BMW 5 - Main category for all drivetrain components for your model.
  • Outer CV joints for BMW 5 - If you only need to renew the outer joint.
  • Inner CV joints for BMW 5 - Ideal for resolving vibration issues on acceleration.
  • Propeller shafts for BMW 5 - Central power transmission for rear-wheel and all-wheel-drive layouts.
  • Propeller shaft centre bearings for BMW 5 - Crucial for keeping the prop shaft stable and vibration-free.
By taking a holistic view of your driveline, you can prevent future breakdowns and save both time and money. A well-maintained drivetrain is key to delivering the driving pleasure the BMW 5 is renowned for.

Why shop with CVJoint24?

CVJoint24 is your trusted destination for drivetrain and power transmission parts. As an international shop backed by a Swedish driveline specialist, we combine extensive technical expertise with a product catalogue of exceptional depth. When you buy a drive shaft for BMW 5 from us, you receive high-grade spare parts alongside the reassurance of dealing with specialists who truly understand automotive engineering. We offer a reliable fitment guarantee, ensuring that parts selected for your vehicle's make, model, and engine variant fit accurately. With 104 model-specific items in stock for the BMW 5, we ensure rapid dispatch and delivery across the EU straight from our warehouse in Helsingborg, Sweden. We know that a car stuck off the road costs time and money, so we focus on getting the right part to your door without delay. Our dedication to quality means we partner exclusively with trusted OE-grade manufacturers, delivering durable car parts with exacting precision. Choose CVJoint24 for a seamless buying experience, professional technical support, and top-tier components for your BMW 5, whether you are a DIY mechanic or running a professional garage.

Frequently asked questions about drive shafts for BMW 5

How do I know if my BMW 5 needs a new drive shaft?

The most common signs are clicking noises when cornering, vibrations during acceleration, or visible grease leaks from torn CV boots.

Is there a difference in drive shafts for BMW 5 models with manual and automatic gearboxes?

Yes, the length and number of splines can vary depending on the gearbox type. Always select your make, model and engine to find the correct version.

Can I replace just one drive shaft or should I replace both at the same time?

You can certainly replace only the damaged shaft, but we recommend inspecting the CV boots on the other side at the same time.

What is included when I buy a drive shaft for BMW 5 from you?

Our drive shafts are delivered as complete units, which include the shaft bar, inner and outer CV joints, and pre-fitted CV boots.

Does the same drive shaft fit both saloon and Touring models of the BMW 5?

They are often identical if the engine and driveline setup match, but there are exceptions. Always verify by selecting your car's exact model and engine.

How quickly can I get my new drive shaft delivered?

We offer dispatch for fast delivery on most of our 104 items for BMW 5, provided they are in stock at the time of ordering.