Drive shafts for BMW X6

Maintaining the driving dynamics of a BMW X6 demands a flawless power transmission system. Our range includes drive shafts engineered for the high demands of the xDrive system, whether...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for BMW X6

161 products
49 - 72 of 161
Item no.:6184281
  • Position: Rear
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 809 mm
  • Joint diameter: 96 mm
Item no.:6108140
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 630 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:1190058
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 637 mm
  • Joint diameter: 86 mm
Item no.:2197360
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,019 mm
  • Joint diameter: 86 mm
Item no.:2109653
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 912 mm
Item no.:1181539
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 612 mm
Item no.:0125215
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 642 mm
Item no.:1107237
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 663 mm
  • Joint diameter: 86 mm
Item no.:2154696
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 973 mm
  • Joint diameter: 86 mm
Item no.:2117660
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,055 mm
Item no.:1103100
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 670 mm
Item no.:512184
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 37
  • Total length: 794 mm
  • Diameter 1: 94 mm
Item no.:2143985
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,020 mm
  • Joint diameter: 86 mm
Item no.:1169128
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 634 mm
  • Joint diameter: 86 mm
Item no.:410641
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 37
  • Total length: 735 mm
  • Diameter 1: 94 mm
Item no.:1181988
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 662 mm
  • Joint diameter: 86 mm
Item no.:2105961
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 969 mm
  • Joint diameter: 98 mm
Item no.:6170459
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 808 mm
  • Joint diameter: 94 mm
Item no.:6122940
  • Position: Rear
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 809 mm
  • Joint diameter: 96 mm
Item no.:6102399
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 630 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:1143534
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 637 mm
  • Joint diameter: 86 mm
Item no.:2105924
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,019 mm
  • Joint diameter: 86 mm
Item no.:2131465
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 912 mm
Item no.:1154056
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 612 mm
Showing 49–72 of 161 products

Drive shafts for BMW X6

Owning a BMW X6 means you value both power and precision. To maintain the vehicle's unique driving characteristics, it is crucial that power transmission works flawlessly. A drive shaft for a BMW X6 is subjected to immense stress, especially in models with high torque and xDrive all-wheel drive. At CVJoint24, we understand these technical demands and therefore offer a carefully selected range of drive shafts that meet or exceed original specifications. With an extensive range in our catalogue, we cover a broad spectrum of model years and engine variants, making us your natural partner when it is time for a replacement.

Our drive shafts are engineered to handle the dynamic power distribution required in a modern SUV. Whether you drive a diesel or petrol variant, your BMW demands components that withstand both heavy loads and varied road conditions. Choosing a drive shaft from a specialist ensures that material choices and tolerances are optimised for your specific vehicle chassis construction. This reduces the risk of future problems and preserves the premium driving feel that a BMW X6 should deliver on every journey.

What does a drive shaft do on a BMW X6?

The drive shaft is a critical link in your car's power transmission system. Its main task is to transfer torque from the gearbox or differential directly to the wheels, enabling propulsion. On a BMW X6, which is frequently equipped with the intelligent xDrive all-wheel-drive system, the drive shafts play a central role in how power is split between the front and rear axles to optimise grip. Without functioning driveshafts, engine power would never reach the road, and the car's advanced stability systems could not operate as intended.

Beyond merely transferring power, the drive shaft must also accommodate suspension travel and steering angles. This is made possible by CV joints at the ends of the shaft, allowing it to change angle and length during driving. For a heavy and powerful vehicle like the BMW X6, these components must be exceptionally robust. A high-quality drive shaft minimises energy loss and vibration, contributing to a quieter cabin environment and a more responsive drive. Understanding the function of the drive shaft is the first step towards realising the importance of choosing the right replacement parts when wear occurs.

Common signs of wear

There are several clear symptoms indicating that a drive shaft on your BMW X6 may need replacing. One of the most common signs is a clicking or knocking noise that occurs when making sharp turns at low speed. This sound usually originates from the outer CV joint that has developed play. Another common symptom is vibration felt through the steering wheel or throughout the whole car during acceleration. These vibrations can point to an imbalance in the shaft or a worn inner joint, often caused by grease leaking out or becoming contaminated.

You should also regularly inspect the drive shaft boots. If a CV boot splits, grease escapes and road dirt penetrates, rapidly ruining the sensitive bearing surfaces inside the joint. If you spot grease splattered on the inside of the wheel rim or in the wheel arch, it indicates a split boot. Ignoring these warnings can lead to total failure, potentially leaving the vehicle stranded mid-journey. By acting on these early warning signs, you can resolve the issue before it causes secondary damage to other drivetrain components.

How to choose the correct drive shaft

Finding the right drive shaft for a BMW X6 can feel complex given the numerous technical specifications that vary between engine options and model years. The most reliable tool at your disposal is your vehicle details. By selecting your car's make, model and engine in our vehicle selector, our catalogue filters down to the components that are fully compatible with your specific car. This eliminates uncertainty regarding shaft length, spline count and whether it is intended for the front or rear axle.

When selecting parts, you should also check whether your vehicle has specific options affecting the drivetrain. It is vital to know whether it is the left or right side that needs replacing, as these often differ in length and design. We always recommend fitting a complete drive shaft if you are uncertain about the condition of the joints, as this is often a more cost-effective and durable solution than replacing an individual component. Our customer service team is also on hand to help you interpret technical data if you have any questions before purchasing.

Related parts to check

Please feel free to check these exact pages for the same vehicle when working on the drive shaft:

When a driveline component shows wear, adjacent parts on the same car often require inspection as well. By comparing these exact pages for the BMW X6, it becomes easier to determine whether an issue lies with the drive shaft itself or another nearby section of the drivetrain.

This is particularly relevant on models where vibrations, play and unwanted noises can shift symptoms across several parts in the same driveline. A quick check of related categories reduces the risk of replacing the right type of component while overlooking an adjacent part causing the same fault.

Checking these parts ensures that the entire power transmission assembly remains in top condition. A worn propeller shaft, for instance, can generate vibrations that eventually damage the inner joints of the drive shafts. Proactively renewing worn boots or constant velocity joints will significantly extend the service life of the more expensive components on your BMW X6.

Why shop at CVJoint24?

CVJoint24 is not just another car parts shop; we are the international store of a Swedish driveline specialist, with our central warehouse in Helsingborg, Sweden, dedicated entirely to drivetrain and power transmission components. Our expertise means we understand the technical nuances of vehicles like the BMW X6 far better than general parts retailers. With a well-stocked inventory for this model, we offer availability and precision that few can match. We prioritise quality at every stage, from the manufacturers we partner with to the technical support we provide our customers across the EU.

When shopping with us, you enjoy a seamless buying experience where choosing your car's make, model and engine guarantees you receive the correct fitment straight away. We know your time is valuable and that your BMW deserves the best. That is why we combine technical expertise with fast dispatch across Europe and the reliability of a specialist supplier. Our goal is to be the first choice for every BMW owner who needs dependable drivetrain components to keep their vehicle in peak condition year after year.

Frequently asked questions about drive shafts for BMW X6

How do I know which drive shaft fits my BMW X6?

The simplest and most reliable way is to select your BMW X6 by make, model and engine variant in our search filter. Because the BMW X6 is available across several generations and engine options, this ensures you get parts with the correct length and spline count.

Is there a difference between front and rear drive shafts on a BMW X6?

Yes, front and rear drive shafts differ in length, thickness and overall design. Furthermore, there is often a difference between the left and right side, especially on the front axle.

What are the most common symptoms of a failing drive shaft?

The most common signs are clicking noises when cornering (outer CV joint), vibrations under acceleration (inner CV joint or imbalance), and visible grease leaks from split CV boots.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft itself is undamaged, you can often replace just the inner or outer CV joint. We supply both complete drive shafts and separate CV joints for the BMW X6.

Why does my BMW X6 vibrate during acceleration?

Vibrations during acceleration are frequently caused by wear in an inner CV joint or an imbalance in the driveshaft itself. It can also be due to issues with the propeller shaft or its centre bearing.

How many drive shafts does a BMW X6 with xDrive have?

A BMW X6 with xDrive all-wheel drive has four drive shafts in total: two at the front and two at the rear, transferring power from the differentials to each wheel.

Are CV boots and fitting accessories included when I buy a drive shaft?

Yes, our complete drive shafts are supplied fully assembled with CV boots, grease and the necessary mounting hardware to make installation straightforward.