Drive shafts for Fiat Brava

Looking for a replacement drive shaft for your Fiat Brava? As a dedicated Swedish driveline specialist, we offer an extensive range of 25 carefully selected options engineered for your...

Products for Drive shafts for Fiat Brava

43 products
25 - 43 of 43
Item no.:311927
  • Position: Front
  • Splines wheel side: 25
  • Total length: 469 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:1158625
  • Position: Front left
  • Splines wheel side: 22
  • Joint diameter: 80 mm
  • ABS teeth: 44
Item no.:2109193
  • Position: Front right
  • Splines wheel side: 22
  • Joint diameter: 80 mm
  • ABS teeth: 44
Item no.:2106991
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 921 mm
  • Joint diameter: 80 mm
  • Tripod shaft diameter: 32 mm
Item no.:219116
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 935 mm
  • Diameter 1: 80 mm
Item no.:2144752
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 935 mm
  • Diameter 1: 80 mm
  • ABS teeth: 44
Item no.:1159072
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 575 mm
  • Diameter 1: 80 mm
  • ABS teeth: 44
Item no.:216940
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 931 mm
  • Joint diameter: 84 mm
  • Tripod shaft diameter: 32 mm
Item no.:117787
  • Position: Front left
  • Splines wheel side: 25
  • Total length: 598 mm
  • Joint diameter: 84 mm
  • Tripod shaft diameter: 32 mm
Item no.:315768
  • Position: Front
  • Splines wheel side: 25
  • Total length: 466 mm
  • Joint diameter: 90 mm
  • Flange diameter: 100 mm
Item no.:3148102
  • Position: Front
  • Splines wheel side: 25
  • Total length: 466 mm
  • Diameter 1: 90 mm
  • ABS teeth: 44
Item no.:311152
  • Position: Front
  • Splines wheel side: 25
  • Total length: 468 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:311571
  • Position: Front
  • Splines wheel side: 25
  • Total length: 468 mm
  • Joint diameter: 90 mm
  • ABS teeth: 44
Item no.:1130221
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 575 mm
  • Joint diameter: 80 mm
Item no.:2104069
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 932 mm
  • Joint diameter: 80 mm
Item no.:1183725
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 575 mm
  • ABS teeth: 44
Item no.:2121098
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 932 mm
  • ABS teeth: 44
Item no.:1126567
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 597 mm
  • Joint diameter: 80 mm
Item no.:2128861
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 916 mm
  • Joint diameter: 80 mm
Showing 25–43 of 43 products

Drive shafts for Fiat Brava

Finding the right drive shaft for your Fiat Brava is vital for your car's reliability and long-term performance. As driveline specialists, we understand that every component plays a critical role in transferring power from the gearbox to the wheels. The Fiat Brava is a model that demands precision when it comes to spare parts, and our comprehensive range covers most engine variants and model years. A drive shaft is not merely a solid bar of metal; it is a complex assembly fitted with CV joints that must manage both angular changes and variations in length while driving. By choosing a product specifically engineered for your Fiat Brava, you ensure vibrations are minimised and power transfer remains as efficient as possible.

Our focus is on supplying parts that match or exceed original specifications. This is especially important for older models where wear on other chassis components can place higher demands on driveshaft balance and durability. When you order from us, you benefit from technical expertise that helps you navigate the options, whether you need a complete shaft for the offside or nearside. We know that accurate fitment is paramount, which is why we partner exclusively with manufacturers who guarantee the highest quality in materials and production standards.

What does a drive shaft do on a Fiat Brava?

The drive shaft on a Fiat Brava is the central link in the vehicle's power transmission system. Its primary role is to transfer the engine's torque, via the gearbox, directly to the front wheels so the car can drive forward or reverse. Because the Fiat Brava is front-wheel drive, the drive shafts must not only transfer power, but also accommodate movements generated when steering and as the suspension works. This is achieved through the inner and outer CV joints situated at either end of the shaft. The inner joint allows the shaft to plunge in and out as the suspension travels, while the outer constant velocity joint lets the wheels swivel smoothly when steering.

Without an intact drive shaft, engine power would never reach the tarmac. On the Fiat Brava, these components are calculated to handle the vehicle's specific kerb weight and engine output. A correctly functioning driveshaft ensures a smooth, vibration-free driving experience. If the shaft becomes bent or play develops in the joints, precision in power delivery is lost. This affects driving comfort and can lead to secondary damage to gearbox output seals or wheel bearings. Understanding the driveshaft's function helps you spot warning signs early, before a breakdown leaves you stranded on the road.

Common signs of wear and tear

There are several clear warning signs indicating that a drive shaft on your Fiat Brava is failing. One of the most typical symptoms is a clicking or knocking noise when turning on full lock at low speeds, such as during parking manoeuvres. This noise usually stems from the outer CV joint, where the internal balls have worn grooves into the housing. Another common symptom is vibration under acceleration. If the car shudders or you feel vibrations through the steering wheel when accelerating, which subside as soon as you lift off the throttle, a worn inner CV joint is frequently the culprit.

You should also inspect for grease splatters on the inside of the wheel rim or around the wheel arch. This generally indicates a split CV boot, which allows grease to escape while road dirt enters the joint. If not resolved quickly, the joint will suffer catastrophic wear from lack of lubrication and abrasive grit. Finally, an unbalanced shaft—caused by physical impact damage or rust forming beneath balance weights—can lead to persistent vibrations at higher road speeds. Ignoring these warning signs can result in a snapped driveshaft, leading to a total loss of drive.

How to choose the correct drive shaft

When it is time to order a replacement drive shaft for your Fiat Brava, several technical parameters must be checked to ensure an accurate fit. The easiest and most reliable method is to select your exact make, model and engine variant in our store. Because the Fiat Brava was produced with various petrol and diesel engines and differing gearboxes, shaft length and the spline count (the teeth at the ends) can vary significantly. An axle intended for a smaller petrol engine will rarely fit a diesel model or one with a larger displacement. Differences also exist between cars with manual and automatic gearboxes.

Another crucial detail to verify is whether your vehicle has ABS and if the ABS ring is pressed directly onto the drive shaft. The tooth count on the ABS reluctor ring must match the original specification exactly for your car's safety systems to operate correctly. We always recommend comparing the measurements of the replacement shaft with your existing unit if you have any doubts. By shopping with us at CVJoint24, you benefit from our specialist expertise; we have carefully categorised our parts to match the exact specifications of your Fiat Brava, making ordering straightforward and hassle-free.

Related parts to inspect

Feel free to check these matching pages for the same vehicle when working on the drive shaft:

When a driveline component shows wear, adjacent parts on the same car often require attention as well. By reviewing these specific pages for Fiat Brava, it is easier to confirm whether an issue lies with the drive shaft itself or with a related part of the drivetrain.

This is particularly relevant on models where vibrations, play and unwanted noises can transfer symptoms across interconnected parts. A quick check of related categories reduces the risk of replacing one correct part while overlooking an adjacent component that causes the same underlying fault.

When replacing or inspecting your drive shaft, reviewing the complete drivetrain is a sensible way to prevent future issues. A damaged driveshaft is often the direct result of a split boot or a corroded ABS ring. Replacing these smaller components early can save you the expense of an entire new shaft down the line. It is also wise to check the gearbox oil level and inspect the driveshaft oil seals where the axle slots into the transmission, as these often weep when a shaft is removed or after extended periods of severe vibration.

Here are several key categories to explore for your Fiat Brava:

  • Outer CV joints for Fiat Brava - If you notice clicking noises only on full steering lock.
  • Inner CV joints for Fiat Brava - To cure vibrations experienced during acceleration.
  • ABS rings for Fiat Brava - If your ABS warning light is on or the pedal pulses unexpectedly.
  • CV boots for Fiat Brava - To protect new or existing joints from grit and moisture.
Inspecting these related components ensures a thorough, long-lasting repair for your car's driveline.

Why shop at CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying high-grade drivetrain components across the European Union. We deliberately focus on an in-depth, dedicated product range rather than trying to supply everything to everyone. When you buy a drive shaft for your Fiat Brava from us, you receive a precision component backed by professionals who understand driveline engineering inside out. Our aim is to deliver the correct part first time, supported by our comprehensive catalogue and simple vehicle selection by make, model and engine. We know that a broken drive shaft takes your car off the road, which is why we dispatch quickly from our central warehouse to keep downtime to a minimum.

Alongside our rapid service and technical support, we provide an accurate fitment guarantee. This means you can order with complete confidence that your chosen part will fit your vehicle when matched against our catalogue specifications. We pair durable, premium spare parts with competitive prices, making CVJoint24 the trusted choice for both DIY mechanics and professional garages seeking quality without compromise. When it comes to keeping your Fiat Brava running smoothly with a dependable drivetrain, we are your reliable specialist partner.

Frequently Asked Questions about Drive Shafts for Fiat Brava

How do I know if my Fiat Brava needs a new drive shaft?

The most common signs are clicking noises when turning, vibrations through the steering wheel during acceleration, or visible grease splattered on the wheel from a torn CV boot.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft bar itself is undamaged, you can often replace either the outer or inner CV joint separately, which can be a more economical option.

Does the same drive shaft fit both the right and left side on a Fiat Brava?

Usually not. On most front-wheel-drive cars like the Fiat Brava, the right and left drive shafts differ in length due to the position of the gearbox.

What is included when I buy a complete drive shaft from you?

Our complete drive shafts are normally supplied fully assembled with both inner and outer CV joints as well as CV boots, ready for direct installation.

How does your fitment guarantee work for Fiat Brava?

If you select your car's make, model, and engine variant and order the recommended part, we guarantee that it fits. In the unlikely event of an issue, we will help you exchange it for the correct part.

Is it difficult to replace a drive shaft on a Fiat Brava yourself?

It requires specific tools and mechanical experience, as you need to dismantle parts of the suspension and brakes. However, for an experienced DIY mechanic, it is a fully manageable job.