Drive shafts for Ford Focus

Find the right drive shaft for your Ford Focus from our comprehensive catalogue, covering early models right up to recent generations. Our range includes drive shafts for both...

Products for Drive shafts for Ford Focus

52 products
25 - 48 of 52
Item no.:2151078
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 27
  • Total length: 973 mm
  • Joint diameter: 91 mm
Item no.:2199976
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 960 mm
  • Joint diameter: 91 mm
Item no.:1180256
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 533 mm
  • Joint diameter: 91 mm
Item no.:1178689
  • Position: Front left
  • Splines gearbox side: 34
  • Splines wheel side: 25
  • Total length: 603 mm
  • Diameter 1: 86 mm
Item no.:2152322
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 25
  • Total length: 948 mm
  • Diameter 1: 86 mm
Item no.:1120168
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 27
  • Total length: 637 mm
Item no.:2183749
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 27
  • Total length: 990 mm
Item no.:1129485
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 36
  • Total length: 570 mm
  • Joint diameter: 91 mm
Item no.:2121445
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 36
  • Total length: 907 mm
  • Joint diameter: 91 mm
Item no.:115619
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 580 mm
  • Joint diameter: 87 mm
Item no.:7316429
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 36
  • Inner splines: 24
  • Total length: 594 mm
Item no.:1172727
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 632 mm
  • Joint diameter: 91 mm
Item no.:2147420
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 27
  • Total length: 582 mm
Item no.:1153354
  • Position: Front left
  • Splines gearbox side: 35
  • Splines wheel side: 27
  • Total length: 686 mm
Item no.:1196077
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 641 mm
Item no.:2145104
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 27
  • Total length: 936 mm
Item no.:2122447
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 985 mm
Item no.:1160467
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 645 mm
  • Joint diameter: 82 mm
Item no.:1192261
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 646 mm
Item no.:2185493
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 965 mm
  • Joint diameter: 82 mm
Item no.:1173466
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 585 mm
Item no.:111502
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 585 mm
Item no.:1166591
  • Splines gearbox side: 34
  • Splines wheel side: 25
  • Total length: 564 mm
  • Joint diameter: 77 mm
  • Joint diameter, gearbox side: 79 mm
Item no.:2135600
  • Splines gearbox side: 34
  • Splines wheel side: 25
  • Total length: 969 mm
  • Joint diameter: 77 mm
  • Joint diameter, gearbox side: 79 mm
Showing 25–48 of 52 products

Drive shafts for Ford Focus

The Ford Focus is one of Europe's most popular cars, renowned for its excellent handling and dependable reliability. Maintaining this driving dynamic requires a drivetrain in first-class condition. A drive shaft for Ford Focus is subjected to significant mechanical stress every day, particularly in stop-start urban traffic and on rough road surfaces. We stock an extensive range covering a wide variety of engine options and model years. Whether you drive an agile hatchback, a spacious estate, or a saloon, the right drive shaft is vital for a smooth, vibration-free, and safe ride.

We appreciate the necessity of an exact fit, which is why our inventory meets or exceeds original equipment specifications. Choosing a drive shaft from us ensures that power transfer remains efficient without unwanted energy loss. Our components are carefully selected to cope with European driving conditions, where road grit, winter salt, and fluctuating temperatures demand superior durability and corrosion resistance. With broad coverage for the Focus line-up, you can rely on us to supply the correct solution for your car.

What does a Ford Focus drive shaft do?

The drive shaft is the critical link transferring engine torque from the gearbox out to the road wheels, propelling the vehicle forward. On a front-wheel-drive car such as the Ford Focus, there is an independent drive shaft on each side at the front. Far from being a simple metal bar, it is a precision-engineered assembly comprising a solid shaft fitted with an inner and an outer CV joint. The inner joint couples to the gearbox, sliding axially in and out to accommodate changes in suspension travel as the car drives over bumps and dips.

The outer joint mounts to the wheel hub, allowing the front wheels to steer smoothly whilst delivering continuous drive to the road. Without an intact drive shaft, your Ford Focus simply cannot move, as engine power fails to reach the tyres. It is a hardworking component built to endure fierce acceleration torque and steep angular movements under full steering lock. High-grade materials and precision-ground bearing tracks inside each constant velocity joint are essential to prevent friction, heat build-up, and sudden mechanical failure.

Common symptoms of wear

Several telltale signs indicate that your Ford Focus requires a replacement driveshaft. One of the most frequent symptoms is a pronounced vibration felt through the steering wheel or the entire chassis under acceleration. This typically points to internal wear or excessive play in the inner CV joint, creating dynamic imbalance under load. If the shudder disappears immediately when lifting off the throttle, the drive shaft is almost certainly the culprit rather than wheel balance. Ignoring this issue risks causing severe wear to the gearbox differential bearings over time.

Another classic symptom is a rhythmic clicking or knocking sound on full steering lock at lower speeds, such as during parking manoeuvres. This noise indicates that the outer CV joint is worn and its internal ball bearings are binding. Furthermore, you should routinely check the condition of the drive shaft boots. Grease splattered across the wheel arch or inner wheel rim points to a split boot. Once the grease escapes, road grit and moisture enter, rapidly destroying the polished raceways inside. Catching a split boot early can often save you the expense of a complete shaft replacement.

Choosing the correct drive shaft

Selecting the matching component can be tricky, as the Ford Focus has seen numerous revisions, facelifts, and platform changes across several generations. Shafts frequently vary in overall length, the spline count at either end, and the presence or type of ABS reluctor rings. Furthermore, dimensions often differ between manual and automatic gearboxes, as well as between petrol and diesel power units. Torquey diesel variants typically require a thicker, reinforced shaft compared to smaller-displacement petrol engines.

The most reliable way to find the correct fitment is by selecting your car's make, model, and engine variant on cvjoint24.com. Our system automatically filters for compatible options engineered for your vehicle. We also advise cross-referencing key technical specifications, such as spline counts, particularly if your car is an import or features drivetrain modifications. Careful checking ensures a hassle-free installation and avoids unexpected delays. Our fitment database is continuously refined to give Ford Focus drivers complete peace of mind.

Related parts to inspect

Be sure to review these related pages for the same vehicle when working on the drive shaft:

When one drivetrain component wears out, surrounding parts on the same car often require attention too. Reviewing these dedicated Ford Focus pages makes it easier to diagnose whether a fault lies purely with the drive shaft or stems from an adjoining part of the powertrain.

This is especially important on models where vibrations, play, and clicking noises can easily be mistaken for issues elsewhere in the front assembly. Checking related driveline categories ensures you tackle the underlying problem properly and avoid overlooking adjacent wear.

Thoroughly assessing the entire front suspension and driveline keeps your Ford Focus safe and dependable. If the main shaft is in good order and only a single joint has failed, replacing just that individual CV joint might be all that is needed. We supply quality parts for both repair options.

Why choose CVJoint24?

CVJoint24 is the international webshop of a dedicated Swedish driveline specialist based in Helsingborg, shipping quality parts straight to customers throughout the European Union. Unlike general car parts retailers, we concentrate exclusively on driveline and powertrain components. This narrow, in-depth focus gives us specialist expertise that directly benefits our customers. Ordering a drive shaft for your Ford Focus from us means choosing an OE-matching component built to exacting standards for fit and longevity.

We combine in-depth technical knowledge with a swift, easy-to-use search based on your car's make, model, and engine. Backed by solid stock in our central warehouse and dependable logistics, we dispatch parts promptly to keep your garage downtime to a minimum. As driveline specialists, we are committed to providing top-quality, cost-effective car parts without compromising on engineering standards. Trust CVJoint24 for a straightforward purchase and restore your vehicle's road performance with confidence.

Frequently asked questions about drive shafts for Ford Focus – Find the right part for your car

How do I know if my Ford Focus needs a new drive shaft?

The most common signs are vibrations through the car under acceleration or a clicking sound when turning. If you also notice grease leaking from a split CV boot, there is a strong chance the drive shaft or its joints need replacing.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, on most Ford Focus models you can replace just the outer or inner CV joint if the shaft itself is undamaged. This is often a more cost-effective option if the wear is limited to the joint.

Does the same drive shaft fit all Ford Focus models?

No, drive shafts vary depending on the model year, engine variant (such as EcoBoost vs TDCi), and whether the car has a manual or automatic gearbox. Always select your vehicle make, model and engine to find the correct part.

Why does my Ford Focus vibrate under acceleration?

Vibrations under acceleration are often caused by wear in the inner CV joint. When excessive play develops in the joint, it creates an imbalance that transmits through the drivetrain and into the chassis.

Is there a difference between the offside and nearside drive shaft on a Ford Focus?

Yes, in most cases the right and left drive shafts are different lengths because the gearbox is not mounted centrally in the engine bay. Always check which side you need before ordering.

What happens if I keep driving with a faulty drive shaft?

In the worst-case scenario, the drive shaft can snap completely, causing the car to lose all propulsion. Severe vibrations can also lead to consequential damage to the gearbox or suspension components.