Drive shafts for Porsche

Find the right drive shaft for your Porsche from our extensive range, covering everything from classic sports cars to modern SUVs. To ensure the component matches your vehicle's exact...

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Drive shafts for Porsche

99 products
49 - 72 of 99
Item no.:617005
  • Position: Rear
  • Total length: 605 mm
  • Splines wheel side: 28
Item no.:117038
  • Position: Front left
  • Total length: 637 mm
  • Splines gearbox side: 27
  • Splines wheel side: 30
Item no.:213639
  • Position: Front right
  • Total length: 1,019 mm
  • Splines gearbox side: 27
  • Splines wheel side: 30
Item no.:616859
  • Position: Rear
  • Total length: 612 mm
  • Splines wheel side: 28
Item no.:613794
  • Position: Rear
  • Total length: 612 mm
  • Splines wheel side: 28
  • ABS teeth: 45
Item no.:614660
  • Position: Rear
  • Total length: 474 mm
Item no.:611879
  • Position: Rear
  • Total length: 690 mm
  • Splines wheel side: 28
Item no.:614964
  • Position: Rear
  • Total length: 687 mm
  • Splines wheel side: 28
  • ABS teeth: 45
Item no.:6123146
  • Position: Rear
  • Total length: 540 mm
Item no.:618780
  • Position: Rear
  • Total length: 540 mm
Item no.:611125
  • Position: Rear
  • Total length: 678 mm
Item no.:3154558
  • Position: Front
  • Flange diameter: 123 mm
  • Total length: 495 mm
  • Splines wheel side: 42
Item no.:414587
  • Position: Rear
  • Total length: 530 mm
  • Splines wheel side: 28
Item no.:417598
  • Position: Rear left
  • Total length: 781 mm
  • Splines gearbox side: 32
Item no.:6117016
  • Position: Rear
  • Flange diameter: 100 mm
  • Total length: 537 mm
  • Splines gearbox side: 100
  • Splines wheel side: 100
Item no.:6195479
  • Position: Rear
  • Flange diameter: 100 mm
  • Total length: 411 mm
  • Splines wheel side: 100
Item no.:3166494
  • Position: Front
  • Flange diameter: 112 mm
  • Total length: 519 mm
  • Splines gearbox side: 112
  • Splines wheel side: 30
Item no.:3125631
  • Position: Front
  • Flange diameter: 108 mm
  • Total length: 547 mm
  • Splines wheel side: 30
Item no.:6174211
  • Position: Rear
  • Flange diameter: 116 mm
  • Total length: 724 mm
  • Splines wheel side: 30
Item no.:416747
  • Position: Rear
  • Total length: 555 mm
  • Splines wheel side: 30
Item no.:417087
  • Position: Rear
  • Total length: 530 mm
  • Splines wheel side: 28
Item no.:418762
  • Position: Rear
  • Total length: 650 mm
  • Splines wheel side: 28
Item no.:218621
  • Position: Front right
  • Total length: 668 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30
Item no.:6149986
  • Position: Rear
  • Total length: 665 mm
  • ABS teeth: 48
Showing 49–72 of 99 products

Drive shafts for Porsche

Porsche is synonymous with precision and performance, placing exceptionally high demands on every component in the drivetrain. A drive shaft for Porsche is far from just a metal bar; it is a precision component engineered to withstand massive torque and rapid acceleration without compromising balance. At CVJoint24, you will find a carefully chosen range covering everything from classic transaxle models to the latest all-wheel-drive performance cars. We understand that a Porsche owner expects parts that match original specifications to preserve the car's distinctive driving dynamics.

By focusing on quality and exact fitment, we ensure that power delivery from the gearbox to the wheels remains seamless, whether on track or on open roads. With an extensive range in this category, we offer substantial coverage for the marque. Every component is manufactured to cope with the stresses of spirited driving, making us the clear choice for discerning owners looking for car parts that offer durability and high reliability.

How drive shafts differ between Porsche models

The design of a drive shaft varies considerably depending on the specific Porsche model. For mid-engine sports cars such as the Boxster and Cayman, the shafts are often shorter and more compact to fit tight packaging, whereas a Porsche Cayenne demands far heavier dimensions to cope with substantial weight and off-road driving. The differences lie not only in overall length, but also in how the CV joints are designed to accommodate varying articulation angles and loads.

A rear-wheel-drive 911 places entirely different demands on its rear driveshafts compared to the front shafts of an all-wheel-drive Panamera. Furthermore, shafts often vary depending on whether the car features a manual gearbox or Porsche's dual-clutch transmission (PDK), as these utilise different flanges and lengths. Understanding these technical nuances is essential to delivering the correct spare parts that endure over time while maintaining the vehicle's dynamic balance.

Common symptoms of wear

There are several telltale signs that a drive shaft is failing. One of the most common symptoms is a clicking or knocking noise when taking sharp corners, which usually indicates that the outer CV joint is worn. If you experience vibrations through the car under acceleration instead, the inner constant velocity joint is often the culprit. For Porsche owners, paying attention to these warnings is critical, as high performance can rapidly accelerate wear once damage sets in.

Another critical indicator is grease splattered across the inside of the wheel rim or around the wheel arch, pointing to a split CV boot. When the boot tears, grit and moisture penetrate while crucial lubricating grease is thrown out, leading to rapid drive shaft failure. By acting early when these symptoms appear, you can often avoid more costly repairs down the road. Regular inspection of your drivetrain's condition is cheap insurance to keep your Porsche in peak condition.

Choosing the right drive shaft for Porsche

Selecting the correct part for a Porsche can be challenging due to numerous technical revisions and trim levels. Knowing the model alone is not always enough; you must also factor in whether the car has a manual or automatic gearbox, as well as two- or four-wheel drive. The most reliable way to navigate our range is to filter by your car's make, model and engine variant. This automatically displays the options that are technically compatible with your vehicle.

Always verify whether it is the offside (right) or nearside (left) that needs replacement, as they often differ in length and configuration on a Porsche. For instance, drive shafts for a Porsche Cayenne can vary significantly across engine variants and production years. By using our site, you ensure you receive a part matching the original specifications for splines, length and bolt circle, guaranteeing trouble-free installation.

Popular Porsche models to explore

Select the right Porsche model for your drive shaft:

When the catalogue is extensive, choosing your specific model is the most effective next step. By selecting your exact model, you reach a tailored page matching your drivetrain configuration and the parts made specifically for your car.

Clicking through to your specific model gives you a clear overview of the components relevant to your vehicle's drivetrain. We also stock parts for models such as the Macan, 911 and 924, making our catalogue one of the most comprehensive available for Porsche enthusiasts.

Why shop with CVJoint24

As a Swedish driveline specialist shipping across the EU from our Helsingborg warehouse, we offer a unique blend of technical expertise and availability. We know that when a Porsche is on the ramp, time is money, and we work to minimise your vehicle's downtime. Our deep category knowledge allows us to offer an accurate fitment guarantee. When you buy from us, you get genuine peace of mind knowing the component has been selected to meet the high standards expected of a premium car.

We aim to help you find the right part straight away, making CVJoint24 the trusted choice for Porsche drivers who appreciate quality and technical know-how. We maintain comprehensive stock of drive shafts, CV joints and CV boots ready for fast dispatch across Europe. Our customer service team has deep knowledge of Porsche drivetrains and is on hand to help with any technical or order queries.

Frequently Asked Questions about Drive Shafts for Porsche

How do I know if my Porsche needs a new drive shaft?

The most common signs are clicking noises on full steering lock, vibrations during acceleration, or visible grease leaking from a split CV boot. If the vibrations intensify with speed, this is often a sign of imbalance or wear in the drive shaft's inner joint.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, in many cases you can replace just the outer or inner CV joint if the shaft itself is undamaged. However, if there is extensive wear or if the shaft has become bent, replacing the complete drive shaft assembly is often more cost-effective and reliable.

Is there a difference between drive shafts for manual and PDK gearboxes?

Yes, there are often differences in both length and gearbox mounting depending on the transmission type. It is therefore crucial to select your vehicle's exact make, model and engine to ensure the drive shaft fits your car's specific configuration.

Does the same drive shaft fit both the right and left side?

Usually not. On most Porsche models, the right and left drive shafts are different lengths due to the position of the gearbox. Always check the product description to confirm which side the part is intended for.

What does the fitment guarantee at CVJoint24 cover?

Our fitment guarantee means that when you select your specific car details and we confirm the part fits, we guarantee it will install without issue. In the unlikely event that it does not fit, we will help you find the correct part right away.

How quickly can I get my new drive shaft delivered?

We dispatch from our Swedish warehouse across the EU, with fast delivery options available for in-stock parts. Orders placed before our cut-off time are typically dispatched the very same day to get your Porsche back on the road as quickly as possible.