Drive shafts for Renault Megane

Our range for Renault Megane spans generations and body types, from early 1990s models like the 1.4 e through to later 2.0 TCe variants. Whether your car is a hatchback, saloon,...

Products for Drive shafts for Renault Megane

119 products
97 - 119 of 119
Item no.:213379
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 29
  • Total length: 963 mm
  • Diameter 1: 90 mm
Item no.:1156745
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 669 mm
  • Joint diameter: 79 mm
Item no.:115548
  • Position: Front left
  • Splines wheel side: 23
  • Total length: 657 mm
  • Joint diameter: 95 mm
  • ABS teeth: 44
Item no.:2192534
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 23
  • Total length: 746 mm
  • ABS teeth: 44
Item no.:1116192
  • Position: Front left
  • Splines gearbox side: 39
  • Splines wheel side: 27
  • Total length: 662 mm
  • Joint diameter: 84 mm
Item no.:2181137
  • Position: Front right
  • Splines gearbox side: 39
  • Splines wheel side: 27
  • Total length: 960 mm
  • Joint diameter: 84 mm
Item no.:215674
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • Total length: 927 mm
  • Diameter 1: 85 mm
  • Diameter 2: 82 mm
Item no.:112310
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 705 mm
  • Diameter 1: 82 mm
  • Diameter 2: 75 mm
Item no.:215124
  • Splines gearbox side: 25
  • Splines wheel side: 25
  • Total length: 943 mm
Item no.:219595
  • Splines gearbox side: 30
  • Splines wheel side: 27
  • Total length: 966 mm
  • Diameter 1: 91 mm
  • Diameter 2: 89 mm
Item no.:2140002
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 931 mm
  • Joint diameter: 82 mm
Item no.:1194474
  • Position: Front left
  • Splines wheel side: 21
  • Total length: 648 mm
  • Joint diameter: 87 mm
  • ABS teeth: 44
Item no.:2144346
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 945 mm
  • Diameter 1: 83 mm
Item no.:214063
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • Total length: 1,005 mm
  • Diameter 1: 84 mm
  • Diameter 2: 77 mm
Item no.:110400
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • Total length: 643 mm
  • Diameter 1: 84 mm
  • Diameter 2: 77 mm
Item no.:216548
  • Splines gearbox side: 26
  • Splines wheel side: 29
  • Total length: 953 mm
  • Joint diameter: 82 mm
  • Joint diameter, gearbox side: 79 mm
Item no.:218118
  • Splines gearbox side: 39
  • Splines wheel side: 27
  • Total length: 1,018 mm
  • Joint diameter: 87 mm
  • Joint diameter, gearbox side: 89 mm
Item no.:116145
  • Splines gearbox side: 27
  • Splines wheel side: 29
  • Diameter 1: 84 mm
  • Diameter 2: 77 mm
Item no.:117124
  • Splines gearbox side: 28
  • Splines wheel side: 29
  • Total length: 676 mm
  • Diameter 1: 90 mm
  • Diameter 2: 85 mm
Item no.:213797
  • Splines gearbox side: 30
  • Splines wheel side: 27
  • Total length: 966 mm
  • Diameter 1: 91 mm
  • Diameter 2: 89 mm
Item no.:1167641
  • Position: Front left
  • Splines wheel side: 21
  • Total length: 648 mm
  • Joint diameter: 87 mm
  • ABS teeth: 44
Item no.:214131
  • Splines gearbox side: 39
  • Splines wheel side: 27
  • Total length: 1,018 mm
  • Joint diameter: 87 mm
  • Joint diameter, gearbox side: 89 mm
Item no.:113708
  • Splines gearbox side: 27
  • Splines wheel side: 29
  • Diameter 1: 84 mm
  • Diameter 2: 77 mm
Showing 97–119 of 119 products

Drive shafts for Renault Megane

The Renault Megane is one of Europe's most popular car models and has been available for decades in a wide variety of body styles, from practical family cars to sporty coupés. What all these versions share is their reliance on a properly functioning drivetrain to transfer power from the engine down to the road. A drive shaft for Renault Megane is a critical component subjected to heavy stresses on every journey, particularly in urban stop-start traffic or during enthusiastic driving along winding roads. Here at CVJoint24, you will find an extensive range of matching items for this specific model series.

Finding the right part for a Renault Megane can sometimes be challenging, as specifications vary depending on engine size, gearbox type and year of manufacture. We have therefore structured our range to make it as straightforward as possible for you as a car owner or mechanic to identify exactly which shaft is required. By focusing on specialist drivetrain expertise, we supply components that meet or exceed original equipment standards, ensuring a long service life and retained driving comfort for your car.

What does a drive shaft do on a Renault Megane?

The primary job of the drive shaft on a front-wheel-drive car like the Renault Megane is to transfer torque from the gearbox to the front wheels. It is a complex mechanical link that must not only rotate at high speed, but also cope with the vehicle's suspension movements and steering angles. Without a functioning drive shaft, the car simply stops moving as the power transfer is broken. The shaft consists of the shaft bar itself along with two joints: an inner joint towards the gearbox and an outer joint towards the wheel. These joints are protected by rubber CV boots that retain the lubricating grease and keep road dirt out.

For the Renault Megane, the design is optimised to strike a balance between weight and strength. Because the Megane is predominantly front-wheel drive, the drive shafts are unequal lengths on the left and right sides, with the longer shaft sometimes fitted with a centre bearing to minimise vibrations. Understanding this layout is essential when troubleshooting, as different symptoms can often be traced back to specific sections of the driveshaft. A properly functioning drive shaft delivers smooth power delivery and prevents unnecessary wear on other parts of the transmission and suspension.

Common signs of wear

There are several clear symptoms indicating that a drive shaft on your Renault Megane is nearing the end of its service life. One of the most classic signs is a rhythmic clicking or knocking noise heard at full steering lock at low speeds, such as during parking. This usually points to a worn outer CV joint. If you instead experience severe vibrations through the steering wheel or throughout the whole car under acceleration, the inner joint is often the culprit. These vibrations sometimes disappear as soon as you lift off the accelerator, which strongly indicates that the fault lies within the drivetrain.

Another critical warning sign to watch for is grease splattered on the inside of the wheel rim or over suspension components. This is typically caused by a split CV boot. Once the boot splits, grease escapes and road dirt gets inside, causing the constant velocity joint to wear out very quickly. For Renault Megane owners, it is also important to pay attention to unusual noises at motorway speeds, which can indicate an imbalanced shaft or problems with a centre bearing. Ignoring these warning signals can lead to total component failure where the shaft snaps, leaving the car stranded and risking consequential damage to the gearbox.

How to choose the correct drive shaft

Choosing the correct drive shaft for Renault Megane requires precision, as there are many technical variables to consider. The first step is to establish whether it is the left-hand (driver's side) or right-hand (passenger side) shaft that needs replacement, as these are rarely identical. Furthermore, you must check the spline count at both ends of the shaft and whether the car is equipped with an ABS system, as this determines whether the shaft requires an integrated ABS ring. The overall length is also a decisive factor that varies between engine variants, such as petrol or diesel, and between manual and automatic gearboxes.

To make the selection process as dependable as possible, CVJoint24 lets you select your car by its make, model and engine variant. Filtering our catalogue by your vehicle details narrows the range down to the options that are technically compatible with your specific Renault Megane. This is the most reliable way to avoid ordering the wrong part. If you remain uncertain about the exact specifications, we recommend comparing the dimensions and tooth count of the old shaft with the information in our product descriptions before finalising your order. Getting the correct part from the start saves workshop time and prevents future drivetrain issues.

Related parts to check

It is also worth checking these exact pages for the same vehicle when working on the drive shaft:

When a drivetrain component shows signs of wear, neighbouring parts on the same car often require inspection as well. Comparing these exact pages for Renault Megane makes it easier to determine whether an issue lies with the drive shaft itself or with an adjacent part of the power transmission.

This is particularly relevant on models where vibrations, play and noises can transmit symptoms across multiple parts in the drivetrain. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent worn part that produces the very same symptom.

By taking a proactive approach and inspecting these parts, you ensure that the complete drivetrain and safety systems function properly. A new drive shaft performs best when paired with healthy suspension components, restoring that original factory driving feel to your Renault Megane.

Why buy from CVJoint24?

As a Swedish driveline specialist, CVJoint24 offers exceptional depth of knowledge and product expertise. We understand the technical specifics of the Renault Megane and have built an inventory that covers virtually every variant of this model. Our focus is on supplying parts with superior precision and durability, which makes us a trusted choice for DIY mechanics and professional garages across Europe. We do not just supply parts; we deliver peace of mind through accurate fitment and dedicated technical support.

Choosing us gives you access to a dedicated specialist with deep category coverage, which means we regularly hold parts in stock that general car parts retailers do not carry. Our efficient logistics and clear focus on driveline components ensure we dispatch the right part quickly across the EU. By selecting your car's make, model and engine, you minimise the risk of incorrect orders and can rest assured that your new drive shaft fits your car perfectly. Turn to a genuine drivetrain specialist – we are here to keep your Renault Megane running smoothly on the road.

Frequently asked questions about drive shafts for Renault Megane

How do I know if my Renault Megane needs a new drive shaft?

The most common symptoms are clicking noises when turning, vibrations under acceleration, or visible grease leaking from a split CV boot. If the vibrations stop when you take your foot off the accelerator, it is a strong indication that the fault lies in the drive shaft.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft itself is undamaged, you can often replace just the outer or inner CV joint. This is frequently a more cost-effective option if the problem is confined to a specific joint.

Why do the drive shafts differ between the right and left sides?

On the Renault Megane, the gearbox is not mounted centrally, which means the shafts are different lengths. The right-hand shaft is usually longer and may sometimes be fitted with a centre bearing to prevent vibrations.

Does the same drive shaft fit all Renault Megane models?

No, specifications vary depending on the generation, engine variant (petrol/diesel), and whether the car has a manual or automatic gearbox. Always select your car's make, model and engine to find the correct part.

What happens if I keep driving with a faulty drive shaft?

A damaged drive shaft can eventually snap completely, leaving the car undriveable. It can also cause severe consequential damage to the gearbox and suspension, and in the worst case create a dangerous hazard on the road.

Do I need a wheel alignment after replacing a drive shaft?

It is not always strictly necessary if no other suspension components have been disturbed, but it is often recommended to ensure the car tracks straight and to prevent uneven tyre wear following the repair.

How do I find the correct spline count for my Megane?

The easiest way is to use our vehicle selector by choosing your make, model and engine. If multiple options are listed, you may need to count the splines on your old shaft or compare them with our detailed product specifications.