Drive shafts for Seat Alhambra

Looking for a replacement drive shaft for your Seat Alhambra? As a Swedish driveline specialist, we supply an extensive range of high-quality drive shafts precision-engineered for your...

Products for Drive shafts for Seat Alhambra

43 products
25 - 43 of 43
Item no.:0136953
  • Position: Front right
  • Splines gearbox side: 30
  • Splines wheel side: 0
  • Total length: 413 mm
Item no.:2138933
  • Position: Front right
  • Splines wheel side: 36
  • Joint diameter: 98 mm
Item no.:118016
  • Position: Front left
  • Splines gearbox side: 40
  • Splines wheel side: 36
  • Total length: 500 mm
  • Joint diameter: 98 mm
Item no.:414637
  • Position: Rear left
  • Splines wheel side: 36
  • Total length: 610 mm
  • Diameter 2: 100 mm
Item no.:513154
  • Position: Rear right
  • Splines wheel side: 36
  • Total length: 649 mm
  • Diameter 2: 100 mm
Item no.:118471
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter: 98 mm
Item no.:212480
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 536 mm
  • Flange diameter: 123 mm
  • ABS teeth: 48
Item no.:2107711
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 543 mm
  • Joint diameter: 98 mm
  • ABS teeth: 48
Item no.:1187239
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 513 mm
  • Joint diameter: 98 mm
  • ABS teeth: 48
Item no.:1137255
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 38
  • Total length: 620 mm
  • ABS teeth: 48
Item no.:2120253
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 38
  • Total length: 558 mm
  • ABS teeth: 48
Item no.:1121311
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter: 98 mm
Item no.:2179461
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 38
  • Total length: 558 mm
  • Joint diameter: 98 mm
Item no.:317416
  • Position: Front
  • Splines wheel side: 38
  • Total length: 486 mm
  • Joint diameter: 100 mm
  • ABS teeth: 48
Item no.:316047
  • Splines wheel side: 38
  • Total length: 505 mm
  • Joint diameter, gearbox side: 112 mm
  • Thread size: M16x1.5
Item no.:115429
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 525 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:512708
  • Position: Rear right
  • Splines wheel side: 38
  • Total length: 477 mm
  • Diameter 1: 94 mm
  • ABS teeth: 48
Item no.:410685
  • Position: Rear left
  • Splines wheel side: 38
  • Total length: 628 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:2170254
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 560 mm
  • Joint diameter: 100 mm
  • ABS teeth: 48
Showing 25–43 of 43 products

Drive shafts for Seat Alhambra

The Seat Alhambra is a popular and spacious MPV that is frequently subjected to heavy loads and long journeys during holidays and daily commuting. This places exceptionally high demands on the vehicle's drivetrain, particularly on its drive shafts, which bear the main responsibility for setting the vehicle in motion. A drive shaft for Seat Alhambra must be able to handle the substantial torque generated by the engine while accommodating wheel travel during both heavy suspension articulation and sharp turns. Here at CVJoint24, you will find a carefully selected range specifically tailored to this model series.

We cover everything from the early model years to the latest versions, whether your car is fitted with an economical TSI petrol engine or a powerful TDI diesel. Choosing the right component is essential for maintaining the car's reliability and avoiding costly consequential damage to the gearbox or suspension. By focusing on quality and an exact fit, we help you keep your Alhambra running smoothly for many kilometres to come. Our parts are manufactured to meet or exceed original equipment specifications, giving you the same peace of mind as buying from a franchised main dealer, but at a far more competitive price.

What does the drive shaft do on a Seat Alhambra?

The drive shaft is a critical link in your Seat Alhambra's transmission system. Its primary role is to transfer rotational energy from the gearbox or differential directly to the driven wheels. Because the Alhambra is either front-wheel drive or four-wheel drive, the front drive shafts must also cope with wide angle changes whenever you steer. This is made possible by the sophisticated CV joints positioned at either end of the shaft. On a Seat Alhambra, the driveshaft operates under constant load, particularly under acceleration and when carrying a full load, as is typical for this type of people carrier.

The inner joint accommodates the axial plunge that occurs when the vehicle bounces over uneven road surfaces, whilst the outer joint allows the wheels to turn freely. Without a functioning drive shaft, the vehicle is completely immobilised, as engine power cannot reach the road surface. It is therefore vital that the shaft is constructed from robust materials capable of withstanding the rigours of everyday driving. A drive shaft in good condition also ensures a vibration-free driving experience and reduces wear on other drivetrain components, which is vital for a vehicle so often used on long journeys.

Common signs of wear

There are several distinct warning signs indicating that a drive shaft on your Seat Alhambra is becoming worn or has failed entirely. One of the most common symptoms is a clicking or knocking noise clearly audible on full steering lock at low speeds, such as during parking manoeuvres or turning at junctions. This typically points to a worn outer CV joint that must be replaced before it fails completely. If you instead experience vibrations through the steering wheel or throughout the entire body shell under acceleration, it may signal that the inner CV joint is worn or that the shaft itself has developed an imbalance.

Another common fault is that the CV boot, which protects the joint and retains the grease, has split or worked loose. If the grease escapes and road dirt or moisture penetrates, the joint's bearing surfaces will deteriorate rapidly. You should also listen for noises during engine braking or sudden jerks in the driveline. Because the Seat Alhambra is a substantial vehicle, these symptoms are often felt more acutely than in smaller passenger cars. Acting swiftly at the first sign of wear is essential to avoid breaking down at the roadside or causing severe damage to your gearbox.

How to choose the correct drive shaft

Finding the correct drive shaft for Seat Alhambra can seem tricky, as numerous engine options and gearbox variants have been fitted throughout the production run. Variations in the overall shaft length, the spline count on both the inner and outer ends, and whether the vehicle is equipped with a manual or automatic (DSG) gearbox all play a decisive role in achieving the right fit. Furthermore, the shafts differ depending on whether your vehicle is front-wheel drive or fitted with the 4Drive all-wheel-drive system, where the rear driveshafts have a completely different construction from the front units.

To make your selection simple and reliable, we recommend selecting your car's exact make, model and engine from our catalogue. Filtering by your vehicle's technical specifications ensures that you only see components that are guaranteed to fit your car. This eliminates the risk of ordering the wrong part and guarantees you receive an item matching original equipment standards for both quality and function. We also offer expert technical support if you are unsure which variant is required for your specific model year of the Seat Alhambra, giving you total confidence in your purchase.

Related parts to check

Make sure to also check these exact pages for the same vehicle when working on the drive shaft:

When a drivetrain component begins to show wear, neighbouring parts on the same car often warrant inspection too. By comparing these exact pages for the Seat Alhambra, it becomes far simpler to determine whether a fault lies purely with the drive shaft or with an adjacent section of the power delivery system.

This is especially important on models where vibrations, play and noises can transmit symptoms across multiple parts within the same drivetrain. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent worn part that contributes to the very same problem.

By inspecting the complete power delivery system, you save both time and money over the long term, avoiding the need to dismantle the same suspension and drivetrain assemblies multiple times.

Why buy from CVJoint24?

CVJoint24 is your dedicated partner when it comes to replacement drivetrain and power transmission components. As a Swedish driveline specialist, we focus exclusively on this field, giving us an unmatched depth of expertise and a focused product range that general parts suppliers struggle to match. We appreciate that your Seat Alhambra is central to your family's daily routine, whether running the school run or touring on holiday, and we work hard to dispatch your parts quickly across Europe from our central Swedish warehouse.

With our accurate fitment data, you can rest assured that the parts you choose using your vehicle's make, model and engine will fit your car seamlessly. We combine high-grade components with competitive pricing and a technical customer service team with in-depth knowledge of driveline mechanics. Choosing us means you receive not just a car part, but the reassurance of buying from an expert who puts your vehicle's reliability and safety first. Pick the right component straight away and experience the difference of a dedicated European driveline specialist.

Frequently asked questions about drive shafts for Seat Alhambra

How do I know if the drive shaft on my Seat Alhambra is faulty?

The most common symptoms are clicking noises when turning (outer joint) or vibrations under acceleration (inner joint). Leaking grease from a split CV boot is also a clear warning sign.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, provided the shaft itself is straight and undamaged, you can often save money by simply replacing the defective inner or outer CV joint.

Does the same drive shaft fit all Seat Alhambra models?

No, specifications vary depending on the model year, engine type (TDI/TSI), gearbox (manual/DSG), and whether the vehicle is front-wheel drive or 4Drive. Always filter by your make, model and engine to ensure the correct fit.

What causes a drive shaft to fail on an Alhambra?

Typical causes include natural wear over time, split CV boots that allow dirt to enter, or high strain from carrying heavy loads and towing trailers.

Is there a difference between drive shafts for manual and automatic transmissions?

Yes, the shaft length and the gearbox-side mounting often differ between manual models and vehicles fitted with a DSG automatic gearbox.

How long does delivery take for a new drive shaft?

We dispatch stocked items promptly from our warehouse, meaning you will normally receive your new drive shaft quickly after placing your order.