Drive shafts for Seat Leon ST

Need a replacement drive shaft for your Seat Leon ST? As Swedish driveline specialists shipping across Europe, we supply an extensive range of dedicated parts for this model. Whether you...

Products for Drive shafts for Seat Leon ST

36 products
25 - 36 of 36
Item no.:314103
  • Position: Front
  • Splines wheel side: 36
  • Total length: 511 mm
  • Flange diameter: 100 mm
Item no.:211919
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 910 mm
  • Joint diameter: 98 mm
Item no.:1169471
  • Splines wheel side: 36
  • Total length: 505 mm
Item no.:7311115
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 754 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 119 mm
Item no.:315465
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 544 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:417205
  • Position: Rear left
  • Splines gearbox side: 40
  • Splines wheel side: 36
  • Total length: 611 mm
  • Diameter 1: 83 mm
Item no.:111103
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 570 mm
Item no.:518615
  • Position: Rear right
  • Splines wheel side: 36
  • Inner splines: 33
  • Total length: 650 mm
  • Diameter 1: 83 mm
Item no.:216592
  • Position: Front right
  • Splines wheel side: 36
Item no.:1173481
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 543 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2159773
  • Position: Front right
  • Splines gearbox side: 33
  • Splines wheel side: 36
  • Total length: 803 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:2188148
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 820 mm
  • Diameter 2: 100 mm
Showing 25–36 of 36 products

Drive shafts for Seat Leon ST

The Seat Leon ST, or Sports Tourer, is an estate that combines the sporty character of the Leon family with practical estate versatility. For this balance to work at its best, the vehicle's drivetrain must be kept in prime condition. A drive shaft for the Seat Leon ST is a precision-engineered component built to withstand high torque loads as well as the stresses of spirited driving across varied road conditions. Our extensive range covers everything from the fuel-efficient TSI petrol engines to the high-torque TDI diesels and the all-wheel-drive 4Drive variants.

Choosing the correct component is vital for vehicle safety and long-term durability. Because the Seat Leon ST is built on the advanced MQB platform, numerous technical nuances set the different driveshafts apart. These include overall shaft length and diameter through to spline counts at both ends. As drivetrain specialists, we understand these exact specifications and supply only parts that meet or exceed original equipment standards. By investing in a quality drive shaft, you ensure that your Seat retains its fuel efficiency and predictable roadholding for many thousands of kilometres to come.

What does a drive shaft do on a Seat Leon ST?

The core purpose of the drive shaft on a Seat Leon ST is to transfer rotational torque directly from the gearbox to the road wheels. While simple in concept, it is mechanically demanding in practice. The drive shaft must constantly adapt in both length and operating angle as the vehicle's suspension travels up and down and as the front wheels turn. This articulation is handled by the inner and outer CV joints fitted at either end of the shaft. Without an intact, functional drive shaft, engine power cannot reach the tyres, leaving the car stranded.

For Seat Leon ST owners, it is worth remembering that the drive shaft forms part of the car's unsprung weight. A properly balanced, correctly dimensioned shaft suppresses unwanted vibrations and reduces wear on adjacent suspension components, such as wheel bearings and mounting bushes. On 4Drive all-wheel-drive models, drive shafts are fitted both front and rear, making precise synchronisation throughout the driveline even more essential. A drive shaft is not just a torque transmitter; it is an integral chassis component affecting everything from acceleration to braking stability.

Common signs of wear and tear

Several early symptoms indicate that a drive shaft on your Seat Leon ST is failing. One of the most typical signs is vibration felt through the steering wheel or cabin floor under acceleration. These vibrations often point to a worn inner CV joint or a shaft that has lost its rotational balance. If the shudder vanishes the moment you come off the throttle, the drive shaft is almost certainly at fault. Another classic symptom is a sharp clicking or knocking noise on tight turns at low speeds, which usually points to a worn outer constant velocity joint.

You should also inspect your wheels for grease splattered inside the rim or around the wheel arch lining. This typically stems from a split CV boot, which allows lubricating grease to escape while letting road dirt and moisture in. Left unaddressed, joint failure follows quickly, often requiring a complete driveshaft replacement. Paying attention to these early warning signs helps you avoid more extensive repairs and keeps your Seat Leon ST dependable. Inspecting driveline components during routine servicing is the most cost-effective way to prevent breakdowns.

How to choose the correct drive shaft

Identifying the exact drive shaft for your Seat Leon ST requires attention to several technical details. First, check your transmission type; manual gearboxes frequently take a different shaft length and fitment compared to dual-clutch DSG transmissions. The layout also matters: front-wheel-drive models use different shafts from all-wheel-drive 4Drive versions. Engine output is another key factor, as higher-torque models use thicker, heavy-duty shafts with different joint designs.

To make selecting parts straightforward and accurate, simply select your car's make, model and engine variant in our store. This instantly filters our catalogue so you only see components that are fully compatible with your vehicle's specific setup. Always check whether you need the left- or right-hand side, as front-wheel-drive shafts are rarely identical in length. Choosing the correct replacement the first time saves you workshop downtime, and our specialist knowledge ensures your new part fits your car seamlessly.

Related components to inspect

We recommend checking these exact pages for your vehicle when working on the drive shaft:

When one driveline component shows signs of wear, neighbouring parts on the same car often need attention too. Comparing these exact pages for the Seat Leon ST makes it easier to tell whether an issue stems strictly from the drive shaft or from another linked part of the drivetrain.

This is especially true on models where vibrations, play and unusual noises can travel between different driveline assemblies. A quick check of related categories helps ensure you do not replace one worn part while overlooking an adjacent component that causes the very same symptoms.

Thoroughly checking the wider drivetrain ensures your new drive shaft operates under ideal mechanical conditions. A torn CV boot on the opposite side or a tired centre bearing can quickly lead to repeat issues if left unattended.

Why buy from cvjoint24.com?

CVJoint24 is your dedicated specialist for drivetrain and power-transmission components. As an international shop backed by Swedish driveline specialists, we focus exclusively on this field, giving us technical depth that general car-parts retailers rarely match. We understand the specific engineering demands of the Seat Leon ST and stock an extensive range combining premium OE-level quality with competitive pricing. When you shop with us, you receive high-grade spare parts alongside expert knowledge to ensure a straightforward repair.

We back our range with an accurate fitment promise so you can order with absolute confidence when selecting your vehicle's details. With fast dispatch across Europe from our central Swedish warehouse, we keep your car's time in the garage to a minimum. Our goal is to provide the best possible experience for anyone maintaining their vehicle's drivetrain. Choose cvjoint24.com for dependable parts, high manufacturing standards, and specialist support tailored to your Seat Leon ST.

Frequently asked questions about drive shafts for Seat Leon ST

How do I know which drive shaft fits my Seat Leon ST?

The simplest and most reliable way is to select your vehicle's make, model, and engine in our search filter. As the Seat Leon ST is available with various engines (TSI, TDI), gearboxes (manual, DSG), and drive systems (front-wheel drive, 4Drive), this narrows down the selection to the exact 51 items compatible with your specific car.

What are the most common symptoms of a faulty drive shaft on a Leon ST?

The most frequent signs include vibrations through the car under acceleration, clicking noises on full steering lock, or grease splattered on the inside of the wheels. If you experience shuddering that stops as soon as you lift off the accelerator, the inner CV joint or the driveshaft itself is often worn.

Is there a difference between drive shafts for front-wheel drive and 4Drive?

Yes, there is a significant difference. Models with 4Drive use specific drive shafts both front and rear to handle the all-wheel-drive system, whereas front-wheel-drive models only have front shafts. In addition, lengths and mounting dimensions often differ between the two configurations.

Are CV joints and CV boots included when I buy a complete drive shaft?

Yes, when you buy a complete drive shaft from us, it arrives fully assembled with both inner and outer CV joints as well as protective CV boots. This makes installation straightforward, saves workshop time, and ensures all components are brand new and perfectly matched.

Can I replace just a CV joint instead of the entire drive shaft?

Yes, provided the shaft itself is undamaged, you can often replace just the outer or inner constant velocity joint. We supply both individual CV joints and complete drive shafts so that you can choose the most cost-effective repair for your Seat Leon ST.

What does your fitment guarantee mean for Seat parts?

Our fitment guarantee means that when you select your vehicle by make, model, and engine variant and order the recommended part, we guarantee it will fit your car. If anything should turn out not to fit, we will resolve it quickly to ensure you get the right part without hassle.