Drive shafts for Volkswagen Golf V Variant

Need a replacement drive shaft for your Volkswagen Golf V Variant? At CVJoint24, you will find an extensive range of driveline parts engineered specifically for this model. Whether you...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for Volkswagen Golf V Variant

142 products
121 - 142 of 142
Item no.:2155928
  • Total length: 793 mm
  • Splines wheel side: 36
Item no.:1114625
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 535 mm
  • Splines wheel side: 36
Item no.:211606
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 815 mm
  • Splines wheel side: 36
Item no.:211289
  • Position: Front right
  • Flange diameter: 108 mm
  • Joint diameter: 108 mm
  • Total length: 795 mm
  • Splines wheel side: 36
Item no.:2192673
  • Position: Front right
  • Total length: 800 mm
  • Splines gearbox side: 23
  • Splines wheel side: 36
Item no.:2133150
  • Total length: 793 mm
  • Splines wheel side: 36
Item no.:115305
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 524 mm
  • Splines wheel side: 36
Item no.:210618
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 815 mm
  • Splines wheel side: 36
Item no.:212890
  • Position: Front right
  • Flange diameter: 108 mm
  • Joint diameter: 108 mm
  • Total length: 795 mm
  • ABS teeth: 0
Item no.:2183994
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 760 mm
  • Splines gearbox side: 23
  • Splines wheel side: 36
Item no.:114515
  • Total length: 520 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:219963
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 815 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:219261
  • Total length: 792 mm
  • Splines wheel side: 36
Item no.:115057
  • Total length: 520 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:214749
  • Flange diameter: 100 mm
  • Total length: 810 mm
  • Splines wheel side: 36
Item no.:213870
  • Total length: 792 mm
  • Splines wheel side: 36
Item no.:215195
  • Flange diameter: 100 mm
  • Total length: 810 mm
  • Splines wheel side: 36
Item no.:219617
  • Total length: 792 mm
  • Splines wheel side: 36
Item no.:219297
  • Total length: 792 mm
  • Splines wheel side: 36
Item no.:214051
  • Total length: 792 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:219419
  • Total length: 792 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:219726
  • Total length: 792 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Showing 121–142 of 142 products

Drive shafts for Volkswagen Golf V Variant

The Volkswagen Golf V Variant, produced between 2007 and 2009, is an estate renowned for its practical functionality and dependable engineering. To preserve its high ride quality, a properly functioning drive shaft is absolutely essential. The drive shaft transfers engine power from the gearbox directly to the road wheels, making it one of the most heavily stressed components in the car's drivetrain. With our comprehensive range, we cover virtually every conceivable configuration of this popular estate model.

Because the Golf V Variant was built with a wide variety of engine options—from smaller petrol units to high-torque diesel engines—demands on the driveshafts vary significantly. A vehicle with higher torque requires a more robustly dimensioned shaft to withstand mechanical strain. At CVJoint24, we possess in-depth technical knowledge of these distinctions and supply only components carefully selected to match the exact specifications of your car. Choosing the correct replacement is not merely about keeping the car rolling; it is about long-term durability and safety for you and your passengers.

What does a drive shaft do on a Volkswagen Golf V Variant?

The primary job of the drive shaft on a Volkswagen Golf V Variant is to serve as the mechanical link between the gearbox (or differential) and the driven wheels. It must transmit power smoothly whilst allowing the wheels to move up and down with the suspension and pivot for steering on the front axle. This articulation is made possible by constant velocity joints at each end of the shaft. The inner CV joint accommodates axial movement as the suspension travels, whilst the outer CV joint manages the wide articulation angles required during steering.

On models equipped with 4Motion all-wheel drive, the drive shafts perform an even more intricate task as torque is distributed to all four wheels. Here, pinpoint precision across every component is vital to ensure the drivetrain functions seamlessly without causing driveline tension. A worn or defective driveshaft can result in uneven power delivery, compromising handling stability and fuel economy. By understanding how these parts interact, you can more easily detect the warning signs and replace the unit before complete component failure occurs.

Common symptoms of wear

There are several distinct warning signs indicating that a drive shaft on your Volkswagen Golf V Variant is failing. One of the most typical symptoms is a rhythmic clicking or knocking noise when negotiating sharp turns at low speeds. This sound usually originates from the outer CV joint, caused by grease loss or dirt ingress that leads to severe wear on the internal steel balls and tracks.

Another frequent sign is noticeable vibration through the steering wheel or throughout the cabin under acceleration. This typically points to wear in the inner CV joint or an unbalanced shaft. If you feel shuddering at specific road speeds or engine revs, inspect your drive shafts straight away. Additionally, always look out for grease splattered inside the wheel rim or around the wheel arch. This is a clear indicator of a split CV boot. Once a drive shaft boot tears, the precision-engineered joint is exposed to moisture, road grit and salt, which quickly ruins the unit and necessitates a complete drive shaft replacement.

How to choose the correct drive shaft

Selecting the right drive shaft for your Volkswagen Golf V Variant can be tricky due to numerous engineering variations. The exact specification depends primarily on your transmission type (manual or DSG), engine code, and whether the car is front-wheel drive or fitted with 4Motion. The overall length of the shaft and the spline count at each end can vary by just a few millimetres or a couple of teeth, meaning a part that looks identical at first glance may fail to fit during installation.

To avoid guesswork, simply select your car's make, model and engine variant in our store selector. This filters our catalogue down to the exact components engineered for your vehicle's specific setup. We cross-reference critical dimensions such as flange diameter, compressed length and ABS ring design so you receive a direct-fit replacement without any need for modification. This saves valuable workshop time, cuts garage costs, and gives you complete peace of mind that your estate is restored to original factory standards.

Related parts to inspect

When working on your drive shaft, make sure to inspect these related pages for the same vehicle:

Whenever one drivetrain component shows signs of wear, neighbouring parts on the same car frequently need attention too. By comparing these dedicated category pages for the Volkswagen Golf V Variant, you can easily verify whether an issue stems solely from the drive shaft or from an adjacent component in the drivetrain.

This is especially critical on models where vibrations, play and mechanical knocking can travel across multiple driveline sections. A thorough inspection of related assemblies reduces the risk of replacing a single part whilst overlooking another worn component that causes the same symptoms.

By assessing the complete drivetrain concurrently, you prevent future breakdowns and ensure smooth, reliable power delivery for many thousands of kilometres to come.

Why choose CVJoint24?

CVJoint24 is the international webshop of a Swedish driveline specialist based in Helsingborg, dedicated to vehicle power transmission. We combine an expansive product range with decades of technical expertise to deliver an outstanding customer experience. When you order a drive shaft for your Volkswagen Golf V Variant from us, you receive a precision-engineered spare part supported by expert knowledge and reliable warranty terms. We understand the necessity of getting your car back on the road promptly, which is why we dispatch quickly across the European Union from our Swedish central warehouse.

Our precise compatibility matching ensures total confidence when you choose your model and engine variant in our store. We supply premium-grade car parts manufactured to withstand harsh European winters, road salt and heavy daily motoring. Rely on CVJoint24 for specialist advice, reliable service and drivetrain components that perform without compromise.

Frequently asked questions about drive shafts for Volkswagen Golf V Variant

How do I know which drive shaft fits my Volkswagen Golf V Variant?

The simplest and most reliable way is to select your car's exact make, model and engine variant in our search filter. As there are 103 different variants depending on the engine, gearbox and drivetrain, this ensures you receive the correct part with the right length and spline count.

Do I need to replace the entire drive shaft if only the CV boot is split?

If you catch a split boot early and the joint is still quiet and clean, replacing just the CV boot may be sufficient. However, if dirt and moisture have entered and caused wear or knocking noises, replacing the complete drive shaft or CV joint is usually the safest and most cost-effective solution.

What is the difference between drive shafts for manual and DSG gearboxes?

Drive shafts often differ in overall length and in how they connect to the gearbox. DSG transmissions frequently require specific mounting flanges or lengths that are not compatible with manual options, so it is vital to check your gearbox type before ordering.

What are the symptoms of a worn inner CV joint on a Golf V Variant?

A worn inner CV joint typically produces noticeable shuddering or vibrations through the car body under acceleration, particularly between 50 and 90 km/h. Unlike outer joints, it rarely produces a clicking noise when cornering.

Are CV joints included when I buy a complete drive shaft?

Yes, when you buy a complete drive shaft from us, it arrives fully assembled with both inner and outer CV joints as well as pre-fitted CV boots, ready for direct installation on your car.

Do drive shafts from a standard Golf V fit a Golf V Variant?

In many cases they are identical if the engine and gearbox match, but there are exceptions depending on chassis setup and model year. Always filter by your specific model and engine to ensure an accurate fit for the Variant estate.