Drive shafts for Volkswagen Touran 2.0 TDI

Need a replacement drive shaft for your Volkswagen Touran 2.0 TDI? As a dedicated Swedish driveline specialist shipping across Europe, CVJoint24 offers an extensive range for your...

Products for Drive shafts for Volkswagen Touran 2.0 TDI

44 products
25 - 44 of 44
Item no.:1163331
  • Position: Front left
  • Inner splines: 30
  • Seal ring diameter: 60 mm
  • Splines wheel side: 36
  • Joint diameter, gearbox side: 100 mm
Item no.:2166760
  • Position: Front right
  • Joint diameter: 98 mm
  • Total length: 799 mm
  • Splines gearbox side: 23
  • Splines wheel side: 36
Item no.:2160164
  • Position: Front right
  • Joint diameter: 90 mm
  • Splines wheel side: 36
  • Joint diameter, gearbox side: 100 mm
  • Thread size: M16x1.5
Item no.:1168171
  • Position: Front left
  • Total length: 477 mm
  • Splines wheel side: 36
  • Joint diameter, gearbox side: 119 mm
Item no.:1157141
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 481 mm
  • Splines gearbox side: 119
  • Splines wheel side: 36
Item no.:2108374
  • Position: Front right
  • Total length: 800 mm
  • Splines gearbox side: 23
  • Splines wheel side: 36
  • Diameter 1: 98 mm
Item no.:210715
  • Position: Front right
  • Total length: 792 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
  • Diameter 1: 98 mm
Item no.:212619
  • Position: Front right
  • Total length: 805 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
  • Diameter 1: 98 mm
Item no.:1124312
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 513 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
Item no.:0197657
  • Position: Front right
  • Total length: 466 mm
  • Splines gearbox side: 37
Item no.:1123591
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 535 mm
  • Splines gearbox side: 100
  • Splines wheel side: 36
Item no.:2112575
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 825 mm
  • Splines gearbox side: 100
  • Splines wheel side: 36
Item no.:316144
  • Position: Front
  • Joint diameter: 98 mm
  • Total length: 475 mm
  • Splines wheel side: 36
  • Joint diameter, gearbox side: 86 mm
Item no.:2127617
  • Position: Front right
  • Joint diameter: 98 mm
  • Total length: 763 mm
  • Splines wheel side: 36
  • Thread size: M16x1.5
Item no.:2119686
  • Position: Front right
  • Total length: 793 mm
  • Splines wheel side: 36
  • Thread size: M16x1.5
  • Number of holes: 6
Item no.:2122651
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 772 mm
  • Splines wheel side: 36
  • Diameter 1: 98 mm
Item no.:213332
  • Position: Front right
  • Total length: 792 mm
  • Splines gearbox side: 108
  • Splines wheel side: 36
  • Diameter 1: 98 mm
Item no.:1159626
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 517 mm
  • Splines gearbox side: 100
  • Splines wheel side: 36
Item no.:2140480
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 815 mm
  • Splines gearbox side: 100
  • Splines wheel side: 36
Item no.:2197109
  • Position: Front right
  • Total length: 795 mm
  • Splines wheel side: 36
  • Thread size: M16x1.5
  • Number of holes: 6
Showing 25–44 of 44 products

Drive shafts for Volkswagen Touran 2.0 TDI

The Volkswagen Touran 2.0 TDI is a versatile and popular family car that combines generous space with strong performance. This model is equipped with a high-torque diesel engine that places specific demands on the vehicle drivetrain. The drive shaft is a critical component responsible for transferring engine power from the gearbox directly to the road wheels. On a car like the Touran, which is often used for carrying heavy loads or embarking on long family journeys, keeping the drive shafts in prime condition is vital to safeguard both safety and driving comfort. At CVJoint24, we are specialists in these driveline parts and understand the technical nuances of the Volkswagen Touran 2.0 TDI.

With a comprehensive range for this specific model variant, we provide solutions that cover most requirements, whether your car has a manual gearbox or the popular DSG automatic. Choosing the correct spare part is not only a matter of reliable function, but also of service life. An underspecified or incorrect drive shaft can lead to secondary damage across both the gearbox and suspension. By ordering from an expert, you ensure you receive components that match or exceed original specifications for your Volkswagen.

What does a drive shaft do on a Volkswagen Touran 2.0 TDI?

The primary job of the drive shaft on your Volkswagen Touran 2.0 TDI is to serve as the link between the power unit and the tarmac. When you step on the accelerator, the 2.0 TDI engine delivers substantial torque through the gearbox. The drive shaft picks up where the gearbox ends, transferring this energy to the front wheels. Because the Touran is front-wheel drive in most configurations, the drive shafts must also accommodate wide steering angles while articulating smoothly with the suspension travel. This demands exceptional material quality and high manufacturing precision.

A complete drive shaft comprises the central shaft bar together with an inner and an outer CV joint. The inner joint mounts to the gearbox and accommodates axial plunge, which is essential as the wheels travel vertically over uneven surfaces. The outer joint sits at the wheel hub and allows articulation for steering. For models with 4MOTION four-wheel drive, rear driveshafts work alongside a propeller shaft to power the rear axle. Understanding this setup is crucial when diagnosing power transmission problems on a modern diesel vehicle.

Common signs of wear

Several clear symptoms indicate that a drive shaft on your Volkswagen Touran 2.0 TDI is failing. One of the most frequent signs is vibration under acceleration. If you notice the car shuddering when you press the accelerator, only for the vibration to disappear as soon as you lift off, the inner constant velocity joint is often worn. This happens when pitting develops on the inner raceways, preventing the balls or tripod rollers from moving freely under load and creating an imbalance across the drivetrain.

Another classic warning sign is a clicking or knocking sound on full steering lock at low speeds, such as when parking. This almost invariably points to a worn outer CV joint. Problems frequently start with a damaged CV boot. Once the boot splits, lubricating grease escapes while road grit and water penetrate, quickly destroying the precision-machined surfaces inside the joint. If you spot grease splattered on the inside of the wheel rim or inside the wheel arch, it is time to inspect the joint before the complete driveshaft fails and leaves you stranded.

How to choose the correct drive shaft

Selecting the right drive shaft for a Volkswagen Touran 2.0 TDI can be demanding because multiple technical variants exist. Driveshafts differ mainly in overall length, spline count on the stubs, and whether the vehicle uses a manual or automatic (DSG) transmission. There may also be variations depending on whether the car uses an ABS ring pressed onto the CV joint or reads wheel speed via magnetic wheel-bearing sensors. With various versions available in our catalogue, precise matching is essential for a straightforward repair.

The most reliable way to find the exact part is to filter by your car's make, model and engine variant. This ensures you browse the drive shafts that are technically compatible with your vehicle's chassis specification and drivetrain. Always verify dimensions such as overall length and spline teeth counts if you are uncertain. Choosing the right specification ensures a trouble-free fit, preventing unnecessary downtime in the garage—especially important for a car relied on daily.

Related parts to check

We recommend checking these related categories for the same vehicle when working on the drive shaft:

When one driveline component shows wear, adjacent parts on the vehicle often warrant an inspection as well. Comparing these exact pages for the Volkswagen Touran 2.0 TDI makes it straightforward to determine whether an issue lies with the drive shaft itself or with another component in the transmission system.

This is particularly relevant on models where vibrations, play and unusual noises can transfer across several parts of the drivetrain. A quick check of related categories minimises the risk of replacing one correct component while overlooking an adjacent worn part that produces identical symptoms.

Replacing split CV boots promptly is the single best way to prolong the life of your drive shafts. Catching a small tear early with an inexpensive boot kit can prevent a costly replacement of the complete drive shaft later. It is also wise to inspect the wheel bearings and ball joints while the driveshaft is unbolted.

Why shop with CVJoint24?

CVJoint24 is your dedicated partner for automotive driveline and power transmission components. As an international shop backed by a Swedish driveline specialist, we offer an extensive depth of range that few suppliers can match. We understand that your Volkswagen Touran 2.0 TDI is a vital part of everyday life, so we never compromise on quality. Our parts are carefully selected to withstand high torque loads and demanding European road conditions throughout the year.

When you choose us, you benefit from dependable car parts alongside our collective technical knowledge. With efficient warehouse handling and dependable EU-wide dispatch, we help you keep garage downtime to a minimum. We continuously work to keep the right parts on our shelves at competitive prices, maintaining the exact technical standards required for modern Volkswagen drivetrains. Welcome to the specialists in drive shafts and power transmission.

Frequently asked questions about drive shafts for Volkswagen Touran 2.0 TDI

How do I know if the drive shaft on my Volkswagen Touran 2.0 TDI is worn or failing?

Common symptoms include clicking noises when turning (outer CV joint) or pronounced vibrations during acceleration (inner CV joint). You should also check whether the CV boots are split and leaking grease onto the wheel rim.

Can I replace just one drive shaft, or should both be changed at the same time?

You can readily replace only the faulty drive shaft. However, they often wear at a similar rate, so it is wise to inspect the CV boots and joints on the other side thoroughly to prevent future issues.

Is there a difference between drive shafts for manual and DSG gearboxes?

Yes, there are often differences in both length and mounting between manual gearboxes and DSG automatics on a Touran 2.0 TDI. Always select your vehicle's exact make, model and engine variant in our selector to ensure you get the right part.

What is included when I order a complete drive shaft from CVJoint24?

A complete drive shaft from us is usually delivered fully assembled with both inner and outer CV joints, durable CV boots and the necessary grease, ready for direct installation on your vehicle.

How quickly will my drive shaft for the Touran be delivered?

We aim for fast dispatch on orders placed promptly. We understand how crucial it is to get your vehicle back on the road without delay.

Does the fitment guarantee apply when I select my vehicle details?

Yes, our fitment guarantee means we ensure the part fits your Volkswagen Touran 2.0 TDI correctly whenever you use our make, model and engine selector.