Drive shafts for Volvo 850

Explore a comprehensive range of drive shafts designed for the Volvo 850 in both saloon and estate configurations. The selection covers a broad spectrum of engine options, including...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for Volvo 850

131 products
97 - 120 of 131
Item no.:2122599
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,025 mm
  • Joint diameter: 90 mm
Item no.:2138028
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,025 mm
  • ABS teeth: 48
Item no.:1163871
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 36
  • Total length: 535 mm
Item no.:2147680
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 1,005 mm
  • ABS teeth: 48
Item no.:118792
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 580 mm
  • Joint diameter: 87 mm
Item no.:7317943
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 578 mm
  • Joint diameter: 98 mm
Item no.:213411
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 987 mm
  • Thread size: M10x1.5
Item no.:1133684
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 580 mm
Item no.:116179
  • Position: Front
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 580 mm
  • ABS teeth: 48
Item no.:2198732
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,025 mm
  • Joint diameter: 90 mm
Item no.:2173761
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,025 mm
  • ABS teeth: 48
Item no.:1189881
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 36
  • Total length: 535 mm
Item no.:2136917
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 1,005 mm
  • ABS teeth: 48
Item no.:110111
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 580 mm
  • Joint diameter: 87 mm
Item no.:1198452
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 578 mm
  • Joint diameter: 98 mm
Item no.:210673
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 987 mm
  • Thread size: M10x1.5
Item no.:114043
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 580 mm
  • ABS teeth: 48
Item no.:213077
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 1,025 mm
  • ABS teeth: 48
Item no.:1157123
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 36
  • Total length: 535 mm
Item no.:2159440
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 1,005 mm
  • ABS teeth: 48
Item no.:1188972
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 580 mm
  • Joint diameter: 87 mm
Item no.:1120126
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 578 mm
  • Joint diameter: 98 mm
Item no.:215582
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 987 mm
  • Thread size: M10x1.5
Item no.:1106258
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 26
  • Total length: 580 mm
  • ABS teeth: 48
Showing 97–120 of 131 products

Drive shafts for Volvo 850

The Volvo 850 was a pioneering model when it was introduced, marking a major step forward for Volvo's front-wheel-drive platforms. The drive shaft is one of the most critical components in this setup, bearing the responsibility of transferring all power from the engine to the road surface. At CVJoint24, you will find an extensive range of drive shafts specifically developed to meet the exacting demands of a Volvo 850. With several different variants in our stock, we cover everything from the early 10-valve engines to the high-performance turbo versions and the rare AWD models.

Choosing a high-quality drive shaft is an investment in the service life of your vehicle. An undersized or poorly manufactured shaft can lead to imbalance, which in turn causes damage to both the gearbox and wheel bearings. As specialists in the All car makes drivetrain sector, we ensure that every component we supply meets or exceeds original equipment standards. This is especially important for the Volvo 850, a car that frequently covers high mileage and whose owners prize the renowned dependability of the badge.

What does the drive shaft do on a Volvo 850?

The primary job of the drive shaft on a front-wheel-drive car like the Volvo 850 is to transmit torque from the gearbox to the front wheels. What makes this task demanding is that the shaft must deliver power continuously whilst the wheels move up and down with the suspension and turn with the steering. This is made possible by the constant velocity joints (CV joints) fitted at each end of the shaft. The inner joint accommodates axial movement as the suspension compresses, whilst the outer joint provides the wide articulation angles required during steering manoeuvres.

On the Volvo 850, the drive shafts differ in length between the right and left sides. The right-hand shaft is significantly longer and is often fitted with a centre bearing to minimise vibrations and reduce torque steer, where the vehicle pulls to one side under hard acceleration. By maintaining precise geometry and balance throughout the driveshaft, power is delivered smoothly and efficiently, which is fundamental to both handling characteristics and passenger comfort.

Common signs of wear

The most common symptom of a worn drive shaft on your Volvo 850 is vibration occurring during acceleration. These vibrations are usually felt throughout the cabin and bodywork, typically caused by play developing in the inner CV joint or by the lubricating grease having dried out. If you instead hear a rhythmic clicking or knocking noise when cornering sharply, such as when parking, this is a classic sign of a defective outer CV joint for Volvo 850. If the noise arises on the right-hand side during a left-hand turn, the right outer joint is usually the culprit.

Another critical warning sign is grease spattered across the inner rim of the road wheel or over suspension components. This indicates that a CV boot has split. Once the boot tears, lubricating grease escapes whilst abrasive road dirt and water enter the joint, rapidly causing total failure. Catching a split boot early can save you the cost of a full driveshaft replacement, but if internal damage has already occurred, fitting a complete new shaft is often the most economical and dependable long-term solution.

How to choose the correct drive shaft

Identifying the correct drive shaft for your particular Volvo 850 requires checking a few technical parameters. There are significant differences between vehicles fitted with a manual gearbox and those with an automatic transmission. Shaft designs also vary depending on the engine: an 850 Turbo uses substantially stronger shafts than a standard naturally aspirated GLT. One of the most important details to verify is the tooth count on the ABS ring. If you install a shaft with the wrong number of teeth, the ABS system will not operate correctly and the instrument warning light will illuminate immediately.

To make your choice quick and accurate, we always advise selecting your vehicle by its exact make, model and engine variant in our shop catalogue. This filters out unsuitable parts and displays only the components that are technically compatible with your specific car. Be sure to confirm whether your car features ABS (fitted to almost all 850 models) and whether any specific chassis number breaks apply. Being meticulous when ordering ensures an uncomplicated installation so your Volvo regains its original reliability without the need for modifications.

Related components to check

Be sure to inspect these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component exhibits wear, adjacent parts on the same car often warrant close inspection too. By comparing these exact pages for the Volvo 850, you can more easily determine whether a fault lies purely within the drive shaft or in a neighbouring section of the power transmission system.

This is particularly relevant on models where vibrations, play and unusual noises can transfer symptoms across multiple drivetrain parts. A quick check of related categories reduces the likelihood of replacing the correct component type whilst overlooking a neighbouring part that contributes to the very same problem.

By proactively replacing a cracked ABS ring for Volvo 850 or a perished seal, you avoid recurring issues and ensure your repair holds up reliably for many years to come.

Why buy from CVJoint24?

CVJoint24 is far more than a standard online retailer; we are the international shop of a Swedish driveline specialist with technical expertise and genuine quality at our core. We understand that precise fitment is everything when it comes to components such as drive shafts. That is why we dedicate extensive resources to ensuring our vehicle database is precise and that every part we supply meets the highest engineering standards. When you purchase a drive shaft for your Volvo 850 from us, you can be confident that you receive a part tested to endure harsh European road conditions and climate extremes.

Our strength lies in the depth of our specialist catalogue. With several dedicated product lines for the Volvo 850, we provide solutions where generic motor factors fall short. We back this with fast dispatch across the EU from our Swedish central warehouse and knowledgeable customer support ready to assist with technical queries regarding your car's drivetrain. Sourcing from a true specialist gives you reassurance that general car parts stores rarely match. Let us help you keep your classic Volvo running smoothly with parts you can trust.

Frequently Asked Questions about Drive Shafts for Volvo 850 – Find the Right Drive Shaft for Your Car

How do I know whether the inner or outer CV joint is faulty on my Volvo 850?

A clicking noise when turning usually indicates a worn outer CV joint, whereas vibrations through the car body under acceleration typically stem from wear in the inner joint.

Do drive shafts differ between manual and automatic gearboxes on the Volvo 850?

Yes, there is often a difference in both length and splines (the teeth at the ends) between manual and automatic gearboxes, so it is essential to select the correct specification.

Do I have to replace both drive shafts at the same time?

No, there is no requirement to replace both at once, but if the CV boots on both sides look worn or cracked, it can be economical to inspect and replace both whilst the car is already raised.

Why is the tooth count on the ABS ring important?

The ABS sensor reads the teeth on the ring to measure wheel speed. An incorrect tooth count causes the car's computer to receive faulty data, which disables the ABS system.

Is everything I need for the replacement included when I buy a drive shaft from you?

Our drive shafts are supplied as complete assemblies with pre-fitted CV joints and boots, ready to install directly onto your car.

Can I replace the drive shaft on my Volvo 850 myself?

Yes, for an experienced DIY mechanic it is a manageable job, but it requires the right tools, including a heavy-duty socket for the hub nut and tools to detach the ball joint.

How does a lowering kit affect the drive shafts on a Volvo 850?

Substantial lowering alters the operating angle of the drive shafts, which can increase wear on the joints and in some cases cause vibrations that were not present previously.