Fiat 500X

Spare parts and drivetrain components for the Fiat 500X.

Products for Fiat 500X

47 products
25 - 47 of 47
Item no.:110336
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 630 mm
Item no.:219229
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 965 mm
Item no.:3508804
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 27
  • Total length: 148,5 mm
Item no.:0504551
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:143673
  • Position: Inner
  • Inner splines: 26
  • Seal diameter: 32 mm
  • Total length: 168 mm
  • Outer splines: 25
Item no.:2133291
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 951 mm
  • Diameter 1: 84 mm
Item no.:117355
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 650 mm
  • Diameter 1: 84 mm
Item no.:241438
  • Position: Front right, Inner
  • Inner splines: 26
  • Splines gearbox side: 25
  • Seal diameter: 29,75 mm
  • Total length: 107,5 mm
Item no.:356806
  • Position: Front, Outer
  • Inner splines: 35
  • Splines wheel side: 27
  • Outer splines: 27
Item no.:0678969
  • Total length: 125 mm
Item no.:211795
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 953 mm
  • Diameter 1: 79 mm
  • Diameter 2: 75 mm
Item no.:242862
  • Position: Inner
  • Splines gearbox side: 24
  • Splines wheel side: 22
Item no.:356461
  • Position: Outer
  • Inner splines: 29
  • Splines wheel side: 35
  • Total length: 140 mm
  • ABS teeth: 22
Item no.:117922
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 602 mm
Item no.:0800145
  • Inner diameter: 30 mm
Item no.:352199
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 59 mm
  • Outer splines: 27
  • Thread size: M24X1,5
Item no.:0614139
  • Total length: 113 mm
Item no.:216156
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 982 mm
Item no.:112583
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 638 mm
  • Diameter 1: 87 mm
  • Diameter 2: 86 mm
Item no.:210569
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 971 mm
  • Diameter 1: 87 mm
  • Diameter 2: 86 mm
Item no.:119706
  • Position: Front left
  • Splines gearbox side: 30
  • Splines wheel side: 27
  • Total length: 599 mm
  • Joint diameter: 94 mm
Item no.:142749
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 30
  • Total length: 160 mm
Item no.:147647
  • Position: Inner
  • Inner splines: 26
  • Seal diameter: 32 mm
  • Total length: 168 mm
  • Outer splines: 25
Showing 25–47 of 47 products

Fiat 500X drivetrain parts

The Fiat 500X is a modern crossover that combines Italian design with robust engineering, placing demanding requirements on the vehicle's drivetrain. The driveline is a critical part of vehicle performance, responsible for transmitting engine torque to the wheels smoothly and without vibration. To preserve the driving enjoyment and safety that the Fiat 500X delivers, choosing spare parts with an exact fit is vital. As a Swedish driveline specialist, we focus on supplying components that meet or exceed the technical specifications for this model.

The drivetrain in a Fiat 500X is subjected to heavy loads, particularly during stop-start city driving or when tackling rougher surfaces where the all-wheel-drive system (on applicable models) engages. By proactively maintaining components such as drive shafts and constant velocity joints, you can prevent costly secondary damage to the gearbox and differential. We understand the importance of getting the right part at the right time, and our range is tailored to meet the needs of Fiat 500X owners across Europe.

How the Fiat 500X drivetrain is constructed

The layout of the drivetrain on the Fiat 500X varies depending on whether the car is front-wheel drive or equipped with four-wheel drive. The base setup features a transverse engine delivering power through a gearbox to the front drive shafts. Each driveshaft is fitted with two joints: an inner joint at the gearbox that permits axial plunge, and an outer CV joint at the wheel hub that allows steering movement whilst transmitting power. This design demands high manufacturing precision to minimise friction and heat build-up.

For all-wheel-drive versions of the Fiat 500X, a propeller shaft runs along the underside of the car to transfer drive to the rear axle. This system is complex and requires every component to operate in perfect harmony. An imbalance in the prop shaft or a worn centre bearing can quickly generate vibrations that travel through the entire bodyshell. By understanding this architecture, we supply parts calibrated specifically for the Fiat 500X, ensuring your vehicle's handling characteristics remain intact year after year.

Common faults and symptoms

There are several distinct signs indicating that drivetrain components on your Fiat 500X are beginning to wear. One of the most typical symptoms is a clicking or knocking sound on full steering lock during acceleration. This usually points to a worn outer CV joint on your Fiat 500X, frequently caused by a split CV boot that has allowed dirt and moisture to enter. If left unattended, the joint can eventually fail completely, leaving the vehicle stranded without drive.

Vibrations felt through the steering wheel or seat under acceleration can instead signal an issue with an inner CV joint or an unbalanced drive shaft on your Fiat 500X. For all-wheel-drive models, pay close attention to unusual noises from underneath the vehicle, which may stem from a worn Fiat 500X propeller shaft. Identifying these symptoms early is key to cost-effective maintenance, allowing you to replace an individual component before it causes costly damage elsewhere in the drivetrain.

Common parts to replace on the Fiat 500X

Depending on driving style and mileage, certain parts are ordered more frequently by our Fiat 500X customers. We have structured our catalogue so you can quickly find the right category. Here are the most relevant product groups for your car:

  • Drive shafts for Fiat 500X – Complete shafts for a quick and simple replacement.
  • Outer CV joints for Fiat 500X – The most common wear item when clicking occurs while turning.
  • Propeller shafts for Fiat 500X – Essential for driveline stability on all-wheel-drive models.

Beyond these main assemblies, replacing CV boots is also very common. A boot is inexpensive insurance; replacing a torn boot promptly protects the underlying CV joint from premature failure. We always recommend inspecting boot condition during every service or tyre change to ensure grease stays inside the joint and contaminants remain out.

Finding the right part for your Fiat 500X

Select the relevant section for your Fiat 500X:

On a vehicle where drivetrain issues can stem from various sources, starting in the right category saves time. By comparing the exact component sections for the Fiat 500X, it is much easier to distinguish between drive shaft, CV joint or propeller shaft faults and navigate directly to the page matching your symptoms and fitment.

Choosing the correct spare part for a modern car like the Fiat 500X can seem daunting given the choice of engines, gearboxes and drive configurations. To simplify the process and ensure correct fitment, you can filter our range by selecting your vehicle's make, model and engine variant. This automatically displays only the parts that are technically compatible with your specific car, eliminating guesswork and saving time during installation.

Once you have located the correct category, such as drive shafts, it is still advisable to verify technical specifications such as spline count and overall length if provided. The Fiat 500X received various technical revisions throughout its production run, so comparing the technical details against your original part is always good practice. Our customer support team is on hand if you need assistance determining which part fits your Fiat.

Why buy from CVJoint24?

CVJoint24 is not just another general car parts retailer; we are a dedicated specialist focusing specifically on drivetrains and power transmission. For Fiat 500X owners, this gives you direct access to technical knowledge and a product range curated for quality and durability. We understand the nuances of Italian drivetrains and stock parts that are often difficult to source through general suppliers. As a Swedish driveline specialist shipping across the EU from our central warehouse, our reputation is built on trust and technical competence.

When you choose us, you receive high-quality parts with the peace of mind that they are engineered to fit and built to last. With straightforward vehicle selection, swift international shipping and dedicated customer care, we are the trusted choice for DIY mechanics and professional garages alike. We combine broad inventory with specialised expertise, ensuring your Fiat 500X continues to drive safely for many thousands of kilometres to come.

Frequently Asked Questions about Drivetrain for Fiat 500X - Driveline Spare Parts

How do I know if my Fiat 500X needs a new drive shaft?

The most common signs are vibrations through the car during acceleration or a persistent clicking noise when turning. If the vibrations intensify with speed, it often indicates unbalance or wear in the drive shaft's inner joint.

Do all outer CV joints fit every Fiat 500X?

No, it can vary depending on engine size, gearbox, and whether the car is front-wheel drive or four-wheel drive. Always select your car's make, model, and engine variant to find the exact matching part.

What causes noises from the propeller shaft on a Fiat 500X AWD?

Unusual noises or vibrations from the propeller shaft are often caused by worn universal joints or a failing centre bearing. It is important to address this promptly to prevent damage to the differential.

Can I replace just the CV boot if the joint is still working?

Yes, if you catch a split boot early and the joint has not started making noises, thoroughly cleaning the joint, repacking it with fresh grease, and fitting a new CV boot may be sufficient.

Are your parts for the Fiat 500X of original equipment quality?

We supply high-quality components manufactured to meet or exceed the technical specifications required for the Fiat 500X, ensuring dependable durability and an exact fit.

How quickly can I receive parts for my Fiat 500X?

We aim for prompt dispatches from our central warehouse in Helsingborg, Sweden, across the EU so you can get your car back on the road as quickly as possible after placing your order.