Fiat Doblo

Spare parts and drivetrain components for the Fiat Doblo.

Products for Fiat Doblo

66 products
25 - 48 of 66
Item no.:0587768
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M28X1,5
Item no.:313372
  • Position: Front left
  • Splines gearbox side: 43
  • Splines wheel side: 27
  • Total length: 499,5 mm
  • Thread size: M24x1.5
Item no.:0653116
  • Total length: 95 mm
Item no.:0963247
Item no.:0935562
Item no.:0634198
Item no.:140679
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 29,7 mm
  • Total length: 179,5 mm
  • Outer splines: 24
Item no.:245510
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 29,7 mm
  • Total length: 479,5 mm
  • Outer splines: 24
Item no.:315638
  • Splines wheel side: 27
  • Total length: 505 mm
  • Joint diameter: 91 mm
  • Tripod shaft diameter: 43 mm
Item no.:2104932
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 958 mm
Item no.:1135496
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 589 mm
Item no.:2183066
  • Position: Front right
  • Splines wheel side: 27
  • Total length: 517 mm
Item no.:111148
  • Position: Front left
  • Splines wheel side: 27
  • Total length: 495 mm
Item no.:2139252
  • Splines wheel side: 25
  • Total length: 522 mm
  • Joint diameter: 84,5 mm
  • Tripod shaft diameter: 36 mm
  • Thread size: M24x1.5
Item no.:2107782
  • Splines wheel side: 25
  • Total length: 506 mm
  • Joint diameter: 91 mm
  • Tripod shaft diameter: 43 mm
Item no.:319315
  • Position: Front
  • Splines wheel side: 25
  • Total length: 505 mm
  • Joint diameter: 85 mm
  • Tripod shaft diameter: 36 mm
Item no.:2101312
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 524 mm
  • Joint diameter: 85 mm
  • Tripod shaft diameter: 36 mm
Item no.:0530663
  • Position: Front, Outer
  • Inner splines: 25
  • Splines wheel side: 25
  • Outer diameter: 89 mm
Item no.:140426
  • Position: Front left, Inner
  • Inner splines: 21
  • Splines gearbox side: 22
  • Seal diameter: 36 mm
  • Total length: 155 mm
Item no.:1160273
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 666 mm
Item no.:2104619
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 906 mm
Item no.:218245
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 923 mm
  • Joint diameter: 86 mm
Item no.:355920
  • Position: Outer
  • Inner splines: 27
  • Splines wheel side: 27
  • Seal diameter: 59 mm
  • Outer splines: 27
Item no.:112124
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 641 mm
  • Joint diameter: 86 mm
Showing 25–48 of 66 products

Fiat Doblo drivetrain parts

The Fiat Doblo is a versatile workhorse often used in demanding environments, from stop-start urban traffic to hauling heavy loads on the motorway. This places rigorous demands on the vehicle's drivetrain, which transfers the engine's power to the wheels. For a vehicle like the Doblo, keeping these components in peak condition is vital to avoid unexpected breakdowns that disrupt work and daily routines. At CVJoint24, the international shop of a Swedish driveline specialist, we offer an extensive range of dedicated components for the Fiat Doblo. Selecting the correct parts ensures optimal power transmission, minimises wear on neighbouring suspension parts, and preserves your vehicle's original driving dynamics and payload capacity.

How the Fiat Doblo drivetrain is designed

The drivetrain on a Fiat Doblo is built to be both robust and efficient, typically utilising a front-wheel-drive layout with a transversely mounted engine. Power flows from the engine through the gearbox and is distributed to the wheels via two drive shafts. Because the gearbox is not centred within the chassis, the Fiat Doblo generally uses a shorter drive shaft on one side and a longer one on the other. Each shaft features two joints: an inner CV joint that accommodates plunge and suspension travel as the wheels move up and down, and an outer CV joint that allows the wheels to steer while maintaining drive. This intricate assembly requires precise manufacturing; even minor imbalances or play can cause noticeable handling issues, especially under heavy load.

Common faults and symptoms

Identifying drivetrain issues early can save you significant time and money. One of the classic signs of wear on a Fiat Doblo is a rhythmic clicking noise when turning tightly, which almost always indicates a worn outer CV joint. Conversely, if you feel pronounced vibrations through the floorpan or steering wheel under acceleration, the inner CV joint or the driveshaft itself has likely developed play or lost balance. Another warning sign is grease or oil spattered inside the wheel rim or under the vehicle. This is usually caused by a split CV boot. Once lubricating grease escapes, dirt enters and leads to metal-to-metal wear, resulting in complete joint failure in very little time unless addressed promptly with the right car parts.

Common parts to replace on a Fiat Doblo

When it is time for a repair, we offer several options depending on the extent of the wear. For the Fiat Doblo, we stock complete drive shafts, which are often the quickest and most reliable solution as they come fully assembled with new joints and boots. If the fault is isolated to a single joint, you can replace that specific component instead. We provide a comprehensive range of outer and inner constant velocity joints. Here are the most relevant categories for your vehicle:

  • Drive shaft Fiat Doblo – Complete assemblies for quick replacement.
  • Outer CV joint Fiat Doblo – Solves clicking noises during cornering.
  • Inner CV joint Fiat Doblo – Eliminates vibrations under acceleration.

Choosing the correct category is the first step towards a lasting repair that restores smooth handling and eliminates unwanted noise and vibration.

Finding the right parts for your Fiat Doblo

Navigate directly to the appropriate category for your Fiat Doblo:

When diagnosing drivetrain symptoms, selecting the right section straight away ensures an accurate fit. Exploring the specific product ranges for the Fiat Doblo makes it straightforward to distinguish between drive shaft, CV joint or propeller shaft issues, guiding you directly to the components that match your symptoms and exact model specification.

Why choose CVJoint24?

Shopping with CVJoint24 means relying on a team with in-depth technical expertise in driveline engineering. As a dedicated Swedish driveline specialist dispatching directly across the EU from our central warehouse in Helsingborg, we understand the specific challenges of maintaining the Fiat Doblo drivetrain. Unlike general car parts retailers, our focused focus ensures unmatched product knowledge and reliable fitment. We only stock components built to rigorous standards, giving you complete confidence on the road. With our technical support and an easy search by make, model and engine, we are here to provide the dependable drivetrain parts your Fiat requires.

Frequently Asked Questions about Drivetrain Parts for Fiat Doblo – Transmission and Driveline Spares

How do I know which drive shaft fits my Fiat Doblo?

The most reliable way is to select your Fiat Doblo by make, model, year and engine variant on our website. This filters out the exact parts engineered specifically for your vehicle's engine and gearbox setup.

What are the most common signs of a failing CV joint on a Fiat Doblo?

The most typical symptoms are a rhythmic clicking or knocking noise when taking sharp turns (outer CV joint) or vibrations through the vehicle during acceleration (inner CV joint).

Can I replace just the CV joint instead of the entire drive shaft?

Yes, provided the shaft itself is undamaged, you can replace solely the inner or outer CV joint, which is often a far more economical repair.

Why is it important to check the CV boots on my Fiat Doblo?

The CV boot protects the constant velocity joint against road grit, dirt and moisture, while retaining essential lubricating grease. A split or damaged boot quickly leads to joint wear and eventual failure.

Do drive shafts differ between various Fiat Doblo engine options?

Yes, drive shafts frequently vary in length, shaft diameter and spline count depending on whether your Doblo has a petrol or diesel engine, as well as the specific gearbox fitted.

Do your CV joint kits include everything needed for the replacement?

Yes, our complete CV joint kits typically include the joint itself, a new CV boot, specialised grease, retaining clips, and fitting hardware such as a centre bolt or axle nut.