Fiat Idea
Car parts and drivetrain components for Fiat Idea.
Products for Fiat Idea
- Position: Front left
- Total length: 636 mm
- Splines gearbox side: 22
- Splines wheel side: 22
- Position: Outer
- Seal diameter: 51 mm
- Inner splines: 21
- Outer splines: 22
- Joint diameter: 75 mm
- Position: Front left
- Total length: 646 mm
- Splines gearbox side: 22
- Splines wheel side: 22
- ABS teeth: 0
- Position: Front right
- Total length: 841 mm
- Seal ring diameter: 51 mm
- Splines gearbox side: 22
- ABS teeth: 0
- Position: Front right
- Total length: 905 mm
- Splines gearbox side: 24
- Splines wheel side: 25
- ABS teeth: 0
- Position: Front left
- Total length: 585 mm
- Splines gearbox side: 24
- Splines wheel side: 25
- Position: Front left
- Total length: 579 mm
- Splines gearbox side: 25
- Splines wheel side: 25
- ABS teeth: 0
- Position: Front right
- Total length: 950 mm
- Splines gearbox side: 24
- Splines wheel side: 25
- Position: Front right
- Total length: 910 mm
- Splines gearbox side: 25
- Splines wheel side: 24
- Position: Front right
- Total length: 871 mm
- Splines gearbox side: 34
- Splines wheel side: 25
- Position: Outer
- Seal diameter: 51 mm
- Inner splines: 24
- Outer splines: 25
- Joint diameter: 84 mm
- Position: Outer
- Seal diameter: 51 mm
- Inner splines: 23
- Outer splines: 25
- Joint diameter: 82 mm
- Position: Front, Inner
- ABS teeth: 34
- Inner splines: 25
- Outer diameter: 100 mm
- Position: Front left
- Total length: 480 mm
- Splines wheel side: 25
- Total length: 609 mm
- Splines gearbox side: 34
- Splines wheel side: 25
- ABS teeth: 0
- Position: Front left
- Total length: 580 mm
- Splines gearbox side: 24
- Splines wheel side: 25
- Position: Front right
- Diameter: 100 mm
- Total length: 505 mm
- Splines wheel side: 25
- Position: Outer
- Seal diameter: 51 mm
- Inner splines: 27
- Outer splines: 22
- Joint diameter: 73 mm
Frequently Asked Questions about Drivetrain for Fiat Idea - Spare Parts and Expertise
How do I know whether the outer or inner CV joint has failed on my Fiat Idea?
If you hear a clicking noise when turning, it is usually the outer CV joint. If the car vibrates under acceleration but stops when you lift off the accelerator, it is typically the inner CV joint that is worn.
Can I replace just the CV boot if it is split on my Fiat Idea?
Yes, if you catch the damage early and the joint has not started to make noises or vibrate, replacing the CV boot and repacking it with fresh grease is often sufficient.
Does the same drive shaft fit both the right and left sides on the Fiat Idea?
Usually not. Drive shafts often differ in length between the right- and left-hand sides due to the position of the gearbox. Always check the specification for the respective side.
What is included when I buy a CV joint kit for my Fiat Idea?
Our kits normally include the CV joint itself, a model-specific CV boot, grease, circlips and, where required, a new centre bolt or hub nut.
Is it difficult to replace a drive shaft myself on a Fiat Idea?
It requires proper tools and some mechanical experience. You will need to dismantle parts of the suspension and sometimes drain the gearbox oil, so having access to a workshop manual is recommended.
How does a damaged ABS ring affect my Fiat Idea?
If the ABS ring on the CV joint is cracked or damaged, the ABS warning light may illuminate or the system may trigger unnecessarily under braking. Many of our outer CV joints are supplied with a pre-fitted ABS ring.