Fiat Panda VAN

Spare parts and drivetrain components for the Fiat Panda VAN.

Products for Fiat Panda VAN

50 products
1 - 24 of 50
Item no.:0623299
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Item no.:0507192
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:1166511
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 669 mm
Item no.:2141718
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 918 mm
  • Joint diameter: 79 mm
Item no.:114242
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 522 mm
  • Joint diameter: 79 mm
  • Diameter 1: 79 mm
Item no.:1184289
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 612 mm
  • Joint diameter: 79 mm
Item no.:212150
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 759 mm
  • Joint diameter: 76 mm
Item no.:7301487
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 822 mm
  • Joint diameter: 73 mm
Item no.:1124481
  • Position: Front left
  • Splines gearbox side: 32
  • Splines wheel side: 25
  • Total length: 525 mm
  • Thread size: M22x1.5
Item no.:2132242
  • Position: Front right
  • Splines gearbox side: 32
  • Splines wheel side: 25
  • Total length: 758 mm
  • Thread size: M22x1.5
Item no.:1145211
  • Position: Front left
  • Thread size: M22x1.5
Item no.:2187707
  • Position: Front right
  • Thread size: M22x1.5
Item no.:0163892
  • Splines wheel side: 20
  • Total length: 820 mm
  • Joint diameter: 80 mm
  • Diameter 1: 80 mm
Item no.:3506273
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:3574367
  • Position: Outer
  • Inner splines: 21
  • Splines wheel side: 22
  • Outer diameter: 76 mm
Item no.:0544718
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 25
  • Outer diameter: 84 mm
  • Outer splines: 25
Item no.:110362
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 570 mm
  • Joint diameter: 84 mm
Item no.:212572
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 875 mm
  • Joint diameter: 84 mm
Item no.:1195645
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 613 mm
  • Joint diameter: 73 mm
  • Tripod shaft diameter: 29 mm
Item no.:3530448
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:0637446
  • Total length: 81 mm
Item no.:6592028
  • Position: Outer
  • Inner splines: 20
  • Splines wheel side: 22
  • Outer diameter: 72,4 mm
  • Outer splines: 22
Item no.:352760
  • Position: Front, Outer
  • Inner splines: 29
  • Splines wheel side: 25
  • Seal diameter: 51 mm
  • Thread size: M24X1,5
Item no.:1105679
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 595 mm
  • Joint diameter: 73 mm
Showing 1–24 of 50 products

Drivetrain for Fiat Panda VAN

The Fiat Panda VAN is a compact yet robust workhorse that frequently faces tough conditions in city traffic and light commercial haulage. The drivetrain is the heart of the vehicle's capacity to deliver power from the engine to the wheels, and for a Fiat Panda VAN this means components that must withstand both frequent stop-and-go driving and varying payload weights. At CVJoint24 you will find a dedicated range of drivetrain parts tailored precisely to this specific model. We focus on providing parts that not only fit mechanically, but also preserve the car's original handling characteristics and long-term reliability.

Maintaining the drivetrain on your Fiat Panda VAN is essential to prevent costly repairs down the line. Because this model is frequently used commercially, components such as drive shafts and joints wear out faster than on a standard passenger car. We provide technically verified spare parts that meet stringent standards for precise fit and durability. Whether you drive the front-wheel-drive version or the four-wheel-drive model requiring a propeller shaft, we have the specialist expertise and products needed to keep your vehicle running reliably on the road.

How the drivetrain is engineered on the Fiat Panda VAN

The drivetrain on a Fiat Panda VAN is engineered to be both efficient and compact. In its standard layout the vehicle is front-wheel drive, meaning power is transferred from the gearbox via two drive shafts directly to the front wheels. Each drive shaft is equipped with an inner and an outer CV joint, allowing the wheels to move with the suspension and steer while continuously transferring power. For Fiat Panda VAN models equipped with all-wheel drive, there is a more complex setup featuring a propeller shaft running underneath the car to distribute power to the rear wheels as well.

This mechanical layout requires precision in every component. A drive shaft for the Fiat Panda VAN must be able to handle engine torque without flexing under load. The outer CV joints are under particular stress because they must operate at wide angles on full steering lock, which is common during low-speed manoeuvres in tight urban environments. By understanding this specific architecture, we can supply parts that are precisely calibrated to the vehicle's weight distribution and gear ratios, ensuring a vibration-free and efficient drive on any surface.

Common faults and symptoms

There are several distinct signs that the drivetrain on your Fiat Panda VAN is starting to wear out. One of the most typical symptoms is a clicking or knocking noise when taking sharp turns, which usually points to a failing outer CV joint on your Fiat Panda VAN. This is frequently caused by a split rubber CV boot, allowing road dirt to penetrate and lubricating grease to escape. If this noise is ignored, it can lead to complete joint failure where the vehicle loses drive altogether, which is both hazardous and disruptive during a working day.

Other frequent symptoms include vibrations through the steering wheel or the chassis under acceleration. This can indicate an out-of-balance driveshaft or wear in the inner constant velocity joints. On four-wheel-drive variants, you should also be alert to vibrations coming from beneath the vehicle, which can indicate that the Fiat Panda VAN propeller shaft or its centre bearing requires attention. By addressing these symptoms early, you can often solve the problem by replacing a single component rather than the complete drivetrain assembly.

Common parts to replace on the Fiat Panda VAN

Depending on driving style and duty cycle, certain components require more frequent replacement on the Fiat Panda VAN. We have structured our product range to cover the most critical requirements for this model. Here are the categories most relevant to your vehicle:

  • Drive shafts for Fiat Panda VAN – We offer several options covering various model years and engine variants.
  • Outer CV joints for Fiat Panda VAN – Dedicated models are available to ensure the correct spline count and dimensions.
  • Propeller shafts for Fiat Panda VAN – For 4x4 models, we stock 1 high-quality solution for reliable power delivery.

In addition to these primary components, it is sensible practice to inspect boots and fitting hardware. Installing a complete drive shaft assembly is often a significant time-saver compared to rebuilding old shafts, especially for commercial transport vehicles where garage downtime must be kept to a minimum. Our car parts are selected to balance high durability with cost efficiency, making them an ideal choice for Fiat Panda VAN owners who demand dependable quality.

How to find the right part for your Fiat Panda VAN

Navigate directly to the relevant subcategory for your Fiat Panda VAN:

On a vehicle with several possible drivetrain faults, it is best to start directly in the correct subcategory. By comparing the exact component areas for the Fiat Panda VAN, it becomes easier to distinguish between drive shaft, CV joint or prop shaft issues and to proceed to the page that best matches your symptoms and fitment.

Identifying the exact part that fits your Fiat Panda VAN can sometimes be tricky, as differences can arise depending on production month, gearbox type or whether the vehicle features ABS. To make the process simple and reliable, we always recommend selecting your car's make, model and engine in our vehicle selector. Choosing your specific vehicle filters our catalogue automatically so only technically compatible parts are displayed. This eliminates the risk of ordering incorrect parts and saves valuable time.

Once you have filtered the available parts, it is also advisable to verify technical specifications such as the tooth count on the ABS reluctor ring or overall shaft length if multiple options are shown. Our customer support team and technical documentation are ready to assist with your choice. Keep in mind that a correctly identified part not only simplifies fitting, but also guarantees that critical safety systems such as ABS and electronic stability control perform exactly as designed. With our expertise, maintaining your Fiat Panda VAN with the correct components from day one is straightforward.

Why shop at CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist. We set ourselves apart from general motor factors through our deep niche expertise and comprehensive focus on power transmission. When sourcing parts for your Fiat Panda VAN from us, you benefit from a catalogue with extensive category depth and products chosen specifically for their quality and fit. We understand the technical nuances of Fiat drivetrains, enabling us to provide reliable advice and products that resolve issues properly over the long term.

Our specialist focus means we stock components that are often difficult to find through general suppliers. We combine the technical expertise of a Swedish driveline specialist with the convenience of a modern international webshop, shipping reliably across the EU from our warehouse in Helsingborg, Sweden. With our simple make, model and engine selector, prompt delivery and dedicated drivetrain focus, we are the natural choice for both private owners and commercial fleets running the Fiat Panda VAN. We never compromise on build quality, because we know a dependable drivetrain is essential for safe, trouble-free motoring.

Frequently Asked Questions about Drivetrain Parts for the Fiat Panda VAN

How do I know if my Fiat Panda VAN needs a new drive shaft?

The most common signs are severe vibrations under acceleration or unusual noises coming from underneath the vehicle. If you notice abnormal shaking under load, it is time to inspect your drive shafts.

Does the same CV joint fit all Fiat Panda VAN models?

No, specifications can vary depending on the engine variant and whether your vehicle is fitted with ABS. Always select your vehicle's make, model and engine to find the exact outer CV joint for your car.

What is the difference between an inner and an outer CV joint?

The outer CV joint is located closest to the wheel and allows for steering movement, whilst the inner joint sits nearest the gearbox and primarily accommodates suspension travel. A clicking noise when turning is usually caused by a worn outer joint.

Do all Fiat Panda VAN models have a propeller shaft?

No, only four-wheel drive (4x4) versions of the Fiat Panda VAN have a propeller shaft. Front-wheel drive models rely solely on front drive shafts.

Can I replace just the CV boot if it is split?

Yes, if you catch the damage early before dirt and grit have entered to damage the joint itself, replacing just the CV boot may be sufficient. However, if the joint has already started to make noise, the entire constant velocity joint must be replaced.

Why should I choose CVJoint24 for my Fiat parts?

We are Swedish driveline specialists offering an extensive range and in-depth expertise, ensuring better fitment and higher quality than general car parts retailers.