Fiat Siena

When servicing or repairing the transmission on your Fiat Siena, choosing components with an exact fit is vital. As a Swedish driveline specialist, we offer a carefully selected range of...

Products for Fiat Siena

7 products
1 - 7 of 7
Item no.:110243
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 555 mm
  • Joint diameter: 83 mm
  • Tripod shaft diameter: 32 mm
Item no.:113128
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 555 mm
  • Diameter 1: 83 mm
  • ABS teeth: 44
Item no.:215632
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 903 mm
  • Joint diameter: 83 mm
  • Tripod shaft diameter: 32 mm
Item no.:7301430
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 903 mm
  • Joint diameter: 83 mm
  • ABS teeth: 44
Item no.:0648027
  • Outer diameter: 19 mm
  • Diameter: 76 mm
Item no.:252225
  • Position: Outer
  • Inner splines: 20
  • Splines wheel side: 22
  • Seal diameter: 47 mm
  • Outer diameter: 80 mm

Drivetrain for Fiat Siena

The Fiat Siena is a model that requires specific components for its power transmission to perform optimally across diverse driving conditions. As driveline specialists, we understand the importance of every part—from the smallest boot to the complete drive shaft—meeting high standards and matching original vehicle specifications. Sourcing the right parts for a Fiat Siena can sometimes be challenging, as the model features distinct technical solutions depending on the engine variant and year of manufacture. At CVJoint24, we have gathered in-depth expertise and an extensive stock range to make the process as straightforward as possible for car owners and garages alike. We focus exclusively on drivetrain components, allowing us to provide technical precision and stock availability that general motor factors often lack.

How the Fiat Siena drivetrain is engineered

The drivetrain on a Fiat Siena is based on a front-wheel-drive configuration with a transversely mounted engine. Power is transmitted from the gearbox to the front wheels via two drive shafts of differing lengths. Each drive shaft is fitted with two joints: an inner CV joint located closest to the gearbox and an outer CV joint at the wheel hub. The outer constant velocity joint is engineered to cope with the steep articulation angles that occur during steering, whilst the inner joint primarily accommodates the axial travel as the suspension works. The whole assembly is protected by CV boots that retain the lubricating grease and seal out grit and moisture. On the Fiat Siena, it is vital that these components work together without play to prevent unnecessary wear on the gearbox and suspension. A properly functioning driveline is essential for both fuel efficiency and ride refinement.

Common faults and symptoms

There are several distinct signs that the drivetrain on your Fiat Siena is wearing out. One of the most typical symptoms is a clicking or knocking sound on full steering lock under acceleration; this usually points to a worn or defective outer CV joint. If you experience vibrations through the car body when accelerating, especially at higher speeds, it often indicates that an inner CV joint or the driveshaft itself is worn or out of balance. Another critical warning sign is grease thrown onto the inside of the wheel rim or into the wheel arch, indicating a split CV boot. When a boot tears, lubricant is quickly lost and abrasive dirt enters, causing rapid constant velocity joint failure. Addressing these symptoms promptly can save significant repair costs down the line.

Common parts to replace on the Fiat Siena

For the Fiat Siena, we have identified the most frequently requested components needed to keep the car in peak condition. Our range is tailored to the exact requirements of this model. The most relevant categories for your Fiat Siena include:

  • Drive shafts for Fiat Siena (several variants available)
  • Outer CV joints for Fiat Siena (1 high-quality variant)
  • CV boots for Fiat Siena (2 model-specific kits)
These parts are selected to match or exceed original equipment standards. The drive shafts come fully assembled and ready for installation, simplifying the repair. The outer CV joints are supplied complete with all necessary fitting hardware, and our CV joint boots are manufactured from durable materials designed to withstand harsh European weather and the rigours of daily driving.

How to find the right part for your Fiat Siena

Navigate directly to the relevant category for your Fiat Siena:

When troubleshooting potential driveline issues, it is best to start in the correct section straight away. By comparing the exact component areas for the Fiat Siena, it is easier to distinguish between drive shaft, CV joint or propeller shaft faults and proceed to the page that best matches your symptoms and fitment.

Choosing the correct part for your Fiat Siena is straightforward thanks to our parts database. Because specifications can vary depending on engine codes and production years, we always recommend selecting your car's make, model and engine in our vehicle selector. This filters for parts that are guaranteed to fit your specific car. While browsing, you can also inspect technical data such as the tooth count on the ABS ring or overall driveshaft length, giving you full peace of mind before ordering. If you are unsure whether you need an entire assembly or simply an individual joint, consult our product pages for detailed dimensions. In our Fiat section, we aim to ensure you get the correct part first time without unnecessary returns.

Why shop at CVJoint24

As a Swedish driveline specialist shipping from our central warehouse across the EU, we provide a unique combination of technical expertise and availability. When you buy from us, you get reliable spare parts backed by our accurate fitment guidance. We understand that your time is valuable, which is why we process orders promptly to keep your car's workshop downtime to an absolute minimum. Because we focus entirely on the drivetrain, we offer higher quality and competitive pricing compared to general car parts retailers. Every item in our inventory is carefully checked for quality. Whether you need a complete drive shaft or a replacement CV boot for your Fiat Siena, you can rely on us to deliver parts built to last on European roads.

Frequently Asked Questions about Drivetrain Parts for Fiat Siena

How do I know if my Fiat Siena needs a new drive shaft?

The most common symptoms are heavy vibrations under acceleration or unusual noises coming from the underside. If you notice that the drive shaft is bent or shows excessive play during inspection, it should be replaced immediately.

Does the same CV joint fit all Fiat Siena models?

No, specifications can vary depending on engine size and whether the car is equipped with ABS. Always select your vehicle's make, model and engine variant in our search tool to ensure the correct fitment.

What is included when I buy an outer CV joint for my Siena?

Our outer CV joints are supplied as complete kits, which typically include the joint itself, a tailored CV boot, grease, clamps, and any necessary circlip or bolt.

Can I replace just the boot if it is split?

Yes, if you catch the damage early before dirt and moisture have damaged the CV joint, replacing just the CV boot is often sufficient. We stock vehicle-specific CV boots for the Fiat Siena for this exact purpose.

How quickly are parts delivered for my Fiat?

We aim for next-day dispatch on all in-stock items, helping you get your Fiat Siena back on the road as quickly as possible.

Do you offer a warranty on drivetrain parts for the Fiat Siena?

Yes, we offer a correct-fitment guarantee when you select your specific model and engine, alongside our standard product warranty covering material and manufacturing defects.