Fiat Tipo

Spare parts and drivetrain components for the Fiat Tipo.

Products for Fiat Tipo

60 products
1 - 24 of 60
Item no.:0606446
  • Total length: 113 mm
Item no.:0527020
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:0562965
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:1103382
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 669 mm
Item no.:2192151
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 918 mm
  • Joint diameter: 79 mm
Item no.:0656551
  • Total length: 89 mm
Item no.:0559939
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M28X1,5
Item no.:0519818
  • Position: Outer
  • Inner splines: 20
  • Seal diameter: 46 mm
  • Outer splines: 22
  • Thread size: M22X1,5
Item no.:0597722
  • Position: Outer
  • Inner splines: 20
  • Splines wheel side: 22
  • Seal diameter: 46 mm
  • ABS teeth: 44
Item no.:0383841
  • Position: Front
  • ABS teeth: 44
  • Inner diameter: 77 mm
  • Outer diameter: 89 mm
  • Width: 11 mm
Item no.:137382
  • ABS teeth: 44
  • Inner diameter: 77 mm
  • Outer diameter: 89 mm
  • Width: 11 mm
Item no.:0661330
  • Outer diameter: 22 mm
  • Diameter: 78 mm
Item no.:347948
  • Position: Front, Inner
  • Inner splines: 25
  • Total length: 32 mm
  • Joint diameter: 100 mm
  • Flange diameter: 100 mm
Item no.:210999
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 933 mm
  • Diameter 1: 80 mm
Item no.:213538
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 933 mm
  • Joint diameter: 80 mm
  • ABS teeth: 44
Item no.:111351
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 570 mm
  • Diameter 1: 80 mm
Item no.:117404
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 570 mm
  • Diameter 1: 80 mm
  • ABS teeth: 44
Item no.:314585
  • Position: Front
  • Splines wheel side: 25
  • Total length: 480 mm
  • Joint diameter: 90 mm
  • ABS teeth: 90
Item no.:315254
  • Position: Front
  • Splines wheel side: 25
  • Total length: 480 mm
  • Joint diameter: 90 mm
  • ABS teeth: 44
Item no.:343270
  • Position: Inner
  • Inner splines: 25
  • Joint diameter: 100 mm
Item no.:1107094
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 575 mm
  • Joint diameter: 80 mm
  • Tripod shaft diameter: 32 mm
Item no.:0596644
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 25
  • Seal diameter: 52 mm
  • ABS teeth: 90
Item no.:0329617
  • Position: Front
  • ABS teeth: 44
  • Inner diameter: 85 mm
  • Outer diameter: 96 mm
  • Width: 11 mm
Item no.:0553668
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 25
  • ABS teeth: 44
Showing 1–24 of 60 products

Drivetrain for Fiat Tipo

The Fiat Tipo requires engineering precision when it comes to power transmission in order to preserve its characteristic driving feel. The drivetrain is the complex system that ensures engine torque is delivered to the driven wheels efficiently and smoothly. For a Fiat Tipo, this usually means a front-wheel-drive layout where every component, from the gearbox out to the wheel hub, must operate in perfect harmony. Choosing the right replacement car parts is not just about keeping the vehicle on the road; it preserves the original driving dynamics, fuel efficiency and safety that Fiat engineered into it. At CVJoint24, we specialise in these precise driveline components to provide you with everything needed for a successful replacement. By focusing on quality-assured parts, we ensure your car remains reliable for many miles to come.

How the Fiat Tipo drivetrain is designed

The drivetrain layout on a Fiat Tipo is built around two drive shafts that transmit power from the differential to the front wheels. Each Fiat Tipo drive shaft is fitted with two joints: an inner CV joint positioned closest to the gearbox, and an outer CV joint at the wheel hub. The inner joint is engineered to plunge inwards and outwards as well as move up and down to match suspension articulation. The outer joint is a constant velocity joint that permits full steering angles while delivering continuous torque regardless of the angle of turn. Alongside these mechanical components, a Fiat Tipo ABS ring is often mounted on the outer joint or shaft. This reluctor ring is essential for the braking system and stability control, supplying the ABS sensor with exact wheel-speed data.

Common faults and symptoms

There are several clear signs that the drivetrain on your Fiat Tipo is wearing out and requires attention. One of the most typical symptoms is a rhythmic clicking or knocking noise when cornering sharply, which almost always points to a worn Fiat Tipo outer CV joint. If you instead notice vibrations through the steering wheel or the entire chassis under acceleration, it usually indicates play in a Fiat Tipo inner CV joint or an out-of-balance driveshaft. Another common issue is the ABS warning light illuminating on the dashboard, typically caused by a cracked or heavily corroded ABS reluctor ring. Ignoring these symptoms can lead to more expensive consequential damage, including complete drive shaft failure or compromised braking performance.

Common replacement parts for Fiat Tipo

Within our range for the Fiat Tipo, we see strong demand for specific components that endure heavy wear on European roads. We stock multiple variations of outer constant velocity joints, reflecting the technical variations across different engines and production years for this model. The most frequently replaced components include:

  • Outer CV joints: These endure the highest stress during steering and represent the most common wear part in the drivetrain.
  • Drive shafts: Complete driveshaft assemblies are often replaced when both inner and outer joints are worn, or if the shaft bar has suffered mechanical damage or severe rust.
  • Inner CV joints: Replaced less frequently than outer joints, but critical for eliminating vibrations under acceleration and load.
  • ABS rings: A very cost-effective fix when the sensor cannot detect wheel speed correctly due to rust jacking or cracking.

By pinpointing exactly which component has failed, you can save both time and money during repairs rather than replacing the complete driveline unnecessarily.

How to find the right part for your Fiat Tipo

Browse directly to the relevant category for your Fiat Tipo:

On a vehicle with several potential driveline issues, it is best to start in the correct subcategory straight away. By identifying the exact category for your Fiat Tipo, it becomes easier to distinguish between faults in the drive shaft, CV joint or propeller shaft and to navigate to the page that matches your symptoms and specifications.

Always check the physical dimensions, tooth count on the ABS ring, and the number of splines on the drive shaft where provided in the product specifications, as this provides complete certainty before ordering. Select your car's make, model and engine to ensure a precise match.

Why shop at CVJoint24

As Swedish driveline specialists, we offer technical expertise that general car parts retailers rarely match. We understand the precise engineering nuances of power transmission on the Fiat Tipo and maintain comprehensive stock across every category to cover your needs. Our focus on dependable quality and accurate fitment eliminates the hassle of incorrect parts and significantly extends your vehicle's service life. When a drivetrain part fails, you need the correct replacement quickly. Combining in-depth technical support with an intuitive online shop and rapid dispatch across the EU from our warehouse in Helsingborg, Sweden, we are the trusted choice for DIY mechanics and professional garages seeking reliable Fiat driveline parts.

Frequently Asked Questions about Drivetrain for Fiat Tipo

How do I know if my Fiat Tipo needs a new outer CV joint?

The most common sign is a clicking or knocking noise from the front wheels when making a sharp turn while accelerating.

Why does my Fiat Tipo vibrate under acceleration?

Vibration during acceleration is often caused by wear in the inner CV joint or an imbalance in the drive shaft itself.

Can I replace just the ABS ring on my Fiat Tipo?

Yes, if the CV joint is otherwise in good condition, you can often replace only the ABS ring, which is a much more cost-effective solution than replacing the entire joint.

Do all drive shafts fit every Fiat Tipo model?

No, drive shafts vary depending on whether the car has a manual or automatic gearbox, as well as the engine variant fitted.

What happens if a CV boot splits on my Fiat?

If the boot splits, lubricating grease leaks out and dirt enters, causing the CV joint to wear out very quickly and eventually fail completely.

How do I find the correct tooth count for my ABS ring?

The most reliable method is to count the teeth on the old ring or select your vehicle make, model and engine in our store to filter the correct specification.