Ford Fusion

Looking for quality drivetrain parts for your Ford Fusion? As a specialist in drivetrain components , we offer an extensive range tailored specifically to this model. With our...

Products for Ford Fusion

24 products
1 - 24 of 24
Item no.:2183514
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 918 mm
  • Joint diameter: 73 mm
Item no.:0587556
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Seal diameter: 53 mm
  • Outer splines: 25
Item no.:1182777
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 606 mm
  • Joint diameter: 75 mm
Item no.:2153513
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 928 mm
  • Diameter 1: 75 mm
Item no.:0597130
  • Position: Outer
  • Inner splines: 20
  • Seal diameter: 53 mm
  • Outer splines: 25
  • Thread size: M22X1,5
Item no.:0573884
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 25
  • Seal diameter: 53 mm
  • Outer splines: 25
Item no.:119962
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 620 mm
  • Joint diameter: 73 mm
Item no.:0902281
  • Inner diameter: 34 mm
  • Outer diameter: 58 mm
Item no.:695641
  • Position: Rear
Item no.:0987070
Item no.:145757
  • Position: Front left, Inner
  • Inner splines: 22
  • Splines gearbox side: 23
  • Seal diameter: 40 mm
  • Total length: 151 mm
Item no.:3596143
  • Position: Outer
  • Inner splines: 21
  • Seal diameter: 53 mm
  • Outer splines: 25
  • Thread size: M22X1,5
Item no.:0154369
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 645 mm
Item no.:0197209
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 943 mm
Item no.:0952670
Item no.:0637973
  • Total length: 81 mm
Item no.:1199674
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 533 mm
Item no.:7306017
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 614 mm
  • Joint diameter: 82 mm
Item no.:1174725
  • Position: Front left
Item no.:2111539
  • Position: Front right
Item no.:1157176
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 616 mm
  • Joint diameter: 72 mm
Item no.:2188341
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 913 mm
  • Joint diameter: 72 mm
Item no.:0678517
  • Total length: 84 mm

Ford Fusion drivetrain

The Ford Fusion is a model that combines agility with practical versatility, but maintaining its dependability and optimal fuel economy requires a properly functioning drivetrain. As a Swedish driveline specialist, we offer a carefully selected range of components specifically tailored to this model. Whether you need a complete drive shaft or a replacement CV boot, our aim is to keep your car running quietly and smoothly on the road without intrusive vibrations or noises. By focusing on premium quality and precise fitment, we ensure the parts you fit will last over time — vital for a car frequently used in demanding city traffic and for daily errands. We understand the technical specifics of the Ford Fusion and have tailored our inventory to cover every requirement, from small seals to heavy-duty shafts.

How the Ford Fusion drivetrain is designed

The drivetrain setup on a Ford Fusion follows a traditional front-wheel-drive layout where power is transferred from the engine via the gearbox to the front wheels through a pair of precision-machined drive shafts. Central to this system are the drive shafts, which must absorb suspension travel and sharp steering angles while transmitting steady torque. Each driveshaft is equipped with two joints: an inner joint at the gearbox that accommodates axial movement, and an outer joint at the wheel hub that allows steering. The outer constant velocity joint is particularly sophisticated, relying on steel balls and precision tracks to maintain constant speed even on full steering lock. On certain Ford Fusion models with split driveshafts, an intermediate centre bearing also plays an essential role in damping vibrations and steadying the longer shaft on the passenger side. Understanding this arrangement is key to diagnosing faults accurately and identifying which components need attention during repairs.

Common faults and symptoms

Several clear symptoms indicate that drivetrain components on your Ford Fusion are worn or damaged. One of the classic signs is a rhythmic clicking or knocking noise clearly audible when accelerating on full steering lock; this almost invariably points to a worn outer CV joint that requires replacement. If you instead experience shuddering or vibrations through the cabin, particularly when accelerating between 50 and 90 km/h, this can suggest an unbalanced drive shaft or wear in an inner CV joint. Another critical warning sign is dark grease on the inside of the wheel rim or spattered inside the wheel arch. This is caused by a split CV boot, which quickly allows road dirt to enter the joint and score its precision surfaces. In addition, a cracked ABS reluctor ring on the CV joint can trigger ABS warning lights and braking system fault codes, a frequent issue on older Ford Fusion models.

Common parts to replace on the Ford Fusion

For the Ford Fusion, we have identified the primary components that most often need renewal to maintain safety and drivability. Our stock includes several drive shaft variants covering the vast majority of engine and gearbox combinations. We also supply multiple outer CV joint options, one of the most common wear items due to its exposed position near the wheel hub. To ensure smooth, vibration-free running, we also stock centre bearings — components often overlooked but vital for long-term drivetrain stability on models with two-piece shaft setups. Finally, CV boots are an inexpensive yet crucial safeguard against catastrophic joint failure by keeping out moisture and road grit. With these dedicated items in stock, you can easily source the exact parts your vehicle needs to regain its original road manners and reliability.

How to find the right part for your Ford Fusion

Navigate directly to the appropriate category for the Ford Fusion:

When diagnosing potential drivetrain faults, starting in the correct category saves time. Comparing the specific subcategories for the Ford Fusion makes it straightforward to distinguish between drive shaft, CV joint, or prop shaft issues, taking you straight to the section matching your symptoms and technical specifications.

Finding the correct replacement part for a Ford Fusion can sometimes be tricky, as dimensions and splines vary depending on engine size, model year, and whether the car is fitted with a manual or automatic gearbox. At CVJoint24, we have streamlined this process so you can order with confidence. Simply select your vehicle's make, model, and engine variant to filter the parts engineered specifically for your car. This eliminates guesswork and ensures a reliable fit straight from the box. The following categories are available for your model:

  • Drive shafts for Ford Fusion
  • Outer CV joints for Ford Fusion
  • Propeller shaft centre bearings for Ford Fusion
  • CV boots for Ford Fusion
We always recommend carrying out a quick visual inspection and checking technical measurements, such as the ABS ring tooth count or overall shaft length, if multiple options are listed. However, our catalogue is structured to direct you accurately in almost every case. Getting the correct component first time saves garage ramp time and unnecessary return shipping.

Why buy from CVJoint24?

CVJoint24 is your dedicated driveline and power transmission specialist, shipping across the EU from our central warehouse in Helsingborg, Sweden. We stand out from general car parts retailers thanks to our deep technical expertise and a targeted inventory focused entirely on passenger cars and light commercial vehicles. When ordering from us, you get quality parts that meet or exceed OEM standards, backed by our commitment to correct fitment. We understand the urgency of getting your car back on the road, which is why we dispatch orders promptly to drivers and workshops throughout Europe. Our focus on drivetrain components ensures expert advice and dedicated product support, making us the trusted choice when servicing or repairing your Ford Fusion.

Frequently asked questions about drivetrain parts for Ford Fusion

How do I know if my Ford Fusion needs a new drive shaft?

The most common signs are vibrations under acceleration or a knocking noise while driving. If the vibrations stop when you take your foot off the accelerator, it is often the inner CV joint or the shaft itself that is worn.

Can I replace just the CV joint, or does the entire shaft have to be replaced?

On the Ford Fusion, you can often replace the outer CV joint separately if the rest of the shaft is undamaged. However, if the inner joint is worn, we usually recommend replacing the entire drive shaft for the best result.

What is included in a CV boot kit for Ford Fusion?

Our CV boot kits include a model-specific boot, high-quality grease and the necessary clamps for a tight and secure installation.

Why does my Ford Fusion vibrate when accelerating?

Vibrations under acceleration are often caused by wear in the inner drivetrain components, such as the inner CV joint or a worn centre bearing on the longer drive shaft.

Do all drive shafts fit every Ford Fusion model?

No, drive shafts vary depending on the engine (e.g. 1.4 or 1.6) and gearbox type. Always select your car's make, model and engine to ensure the correct fitment.

How quickly are the parts for my Ford Fusion delivered?

We dispatch in-stock items promptly from our central warehouse, ensuring you can get your car back on the road without delay.