Ford Ranger

Spare parts and drivetrain components for Ford Ranger.

Products for Ford Ranger

93 products
25 - 48 of 93
Item no.:0567873
  • Position: Outer
  • Inner splines: 36
  • Seal diameter: 61 mm
  • Outer splines: 28
  • ABS teeth: 44
Item no.:149955
  • Position: Inner
  • Splines gearbox side: 26
  • Splines wheel side: 25
Item no.:240382
  • Position: Inner
  • Splines gearbox side: 28
  • Splines wheel side: 29
  • ABS teeth: 44
Item no.:144553
  • Position: Inner
  • Splines gearbox side: 30
  • Splines wheel side: 28
  • ABS teeth: 44
Item no.:158729
  • Position: Outer
  • Inner splines: 36
  • Seal diameter: 61 mm
  • Outer splines: 28
  • ABS teeth: 44
Item no.:0248609
  • Position: Rear
  • Total length: 1,422 mm
  • Number of joints: 3
  • Outer diameter 1: 65 mm
  • Bolt circle diameter 1: 108 mm
Item no.:0825430
  • Inner diameter: 28 mm
  • Width: 16 mm
Item no.:697039
  • Total length: 92 mm
  • Diameter: 27 mm
Item no.:0886059
  • Inner diameter: 35 mm
  • Bearing thickness: 14 mm
  • Hole spacing c/c: 181 mm
Item no.:0986076
  • Inner diameter: 34 mm
  • Outer diameter: 58 mm
Item no.:219431
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 28
  • Total length: 565 mm
Item no.:628437
  • Position: Rear
  • Total length: 1,970 mm
  • Outer diameter 1: 65 mm
  • Bolt circle diameter 1: 108 mm
  • Outer diameter 2: 65 mm
Item no.:243162
  • Position: Front right, Inner
  • Inner splines: 27
  • Seal diameter: 56 mm
  • Total length: 149 mm
  • Outer splines: 29
Item no.:3533689
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 61 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:0620200
  • Total length: 100 mm
Item no.:0932652
  • Inner diameter: 48 mm
  • Outer diameter: 70 mm
Item no.:698740
  • Position: Rear
Item no.:0625738
  • Total length: 91 mm
Item no.:0968310
Item no.:0979381
Item no.:0619826
Item no.:140403
  • Position: Front left, Inner
  • Inner splines: 27
  • Seal diameter: 35 mm
  • Joint diameter: 92 mm
  • Outer splines: 29
Item no.:0649295
  • Total length: 102 mm
Item no.:0905672
  • Inner diameter: 33 mm
  • Outer diameter: 56 mm
Showing 25–48 of 93 products

Drivetrain for Ford Ranger

The Ford Ranger is renowned for its strength and versatility, but maintaining its performance demands a drivetrain in top condition. The drivetrain is the system that transfers the engine's power to the wheels, and on a four-wheel-drive vehicle like the Ranger, this setup is significantly more complex than on a standard passenger car. At CVJoint24, you will find a carefully selected range of spare parts engineered specifically to cope with the stresses a pickup faces every day. With an extensive inventory for this model, we cover most needs that arise during maintenance or repairs.

Investing in high-quality components for your power transmission is vital for both safety and longevity. In the worst-case scenario, a defective drivetrain component can lead to a complete breakdown on the open road or out in the field. By choosing parts from a specialist, you ensure that every component—whether an outer CV joint for your Ford Ranger or a complete axle—meets the precise technical specifications required for your vehicle's specific drive system.

How the drivetrain is engineered on the Ford Ranger

The drivetrain on a Ford Ranger consists of several critical components working together to deliver optimum traction. As most Ranger models feature four-wheel drive (4WD), the system incorporates both front and rear drive shafts as well as a central propeller shaft. Power travels from the gearbox via a transfer case to the respective axles. At the front, driveshafts with joints accommodate both suspension movement and steering articulation, whilst the rear assembly relies on a robust prop shaft to drive the rear wheels.

It is important to understand that every part in this system is dimensioned to handle the torque generated by the engine. On the Ford Ranger, components are reinforced to endure off-road driving and heavy towing. A propeller shaft for a Ford Ranger, for instance, is designed to minimise vibration even at high speeds and under heavy load. Understanding this layout helps you identify where a potential fault might lie whenever your pickup ceases to handle as it should.

Common faults and symptoms

Several clear signs indicate that a component in your Ford Ranger's drivetrain is beginning to fail. One of the most frequent symptoms is a clicking or knocking sound on full steering lock, which typically points to a worn outer CV joint. If you instead experience vibrations throughout the vehicle under acceleration, it may signal play in an inner CV joint or an unbalanced prop shaft. Vibrations can also stem from worn centre bearings along the propeller shaft.

Another common issue on the Ford Ranger relates to the ABS system. If the ABS warning light illuminates or the system intervenes erratically, a cracked or corroded ABS reluctor ring is often the culprit. Because these rings are exposed to dirt, grit and road salt, they are natural wear items. Ignoring these symptoms can lead to more costly consequential damage to the gearbox or differential, which is why addressing defects promptly is always recommended.

Common parts to replace on the Ford Ranger

Depending on how your vehicle is used, certain parts are subjected to greater stress than others. For the Ford Ranger, complete front drive shafts are in particularly high demand, as they absorb substantial punishment during off-road driving. Here are the most relevant categories for your pickup:

  • Drive shafts for Ford Ranger – We stock multiple variants covering different model years and engine options.
  • Propeller shafts for Ford Ranger – With several designs available, we offer solutions for both front and rear sections.
  • Outer CV joints for Ford Ranger – A critical component for steering and wheel-end power transfer.
  • Inner CV joints for Ford Ranger – Essential for eliminating driveline vibrations under acceleration.
  • ABS rings for Ford Ranger – A straightforward yet vital part for safe and reliable braking.

By replacing worn parts with precision-engineered new components, you restore your vehicle's original handling characteristics and operational reliability. Our range caters to both private owners and commercial operators who rely on their Ford Ranger to perform reliably day in, day out.

Finding the right part for your Ford Ranger

Navigate directly to the appropriate section for your Ford Ranger:

On a vehicle with several potential drivetrain issues, starting directly in the correct category is sensible. Comparing the exact component categories for the Ford Ranger makes it easier to distinguish between faults in a drive shaft, constant velocity joint or propeller shaft, taking you straight to the page matching your symptoms and fitment.

Locating the correct spare part for a pickup like the Ford Ranger can sometimes prove challenging, as specifications vary according to cab style, engine size and gearbox type. To make this effortless, use our straightforward vehicle selector. By choosing your car's make, model and engine, you quickly filter for products verified to fit your exact vehicle, eliminating guesswork and saving valuable time during repairs.

When selecting parts, it is also advisable to verify technical details such as the spline count on drive shafts or the length of the propeller shaft, especially if the vehicle has been modified or if multiple variants exist for the same model year. Our customer support team and detailed product descriptions are always on hand to help you navigate our comprehensive range of drivetrain components. Selecting the right part from the outset ensures smooth installation and dependable performance.

Why buy from CVJoint24

CVJoint24 is not just another car parts retailer; we are the international shop of a Swedish driveline specialist with our central warehouse in Helsingborg, Sweden, dedicated exclusively to driveline and power transmission components. This means we possess deep technical expertise that general parts stores often lack. When you purchase a spare part for your Ford Ranger from us, you receive a product selected for high build quality and precise fitment. We understand the demanding requirements placed on a Ford Ranger and stock our warehouse accordingly.

Our strength lies in our specialised category depth and reliable European dispatch. With precise fitment data and an intuitive model search, we make maintaining your pickup straightforward and dependable. We strive to be the premier choice for Ford owners seeking confidence, specialist know-how and a catalogue tailored to keep their vehicle running smoothly.

Frequently Asked Questions about Ford Ranger Drivetrain – Power Transmission Spare Parts

How do I know if my Ford Ranger needs a new drive shaft?

The most common signs are clicking noises when cornering or pronounced vibrations whilst driving. If the CV boot is split and grease has escaped, there is a strong likelihood that the drive shaft or CV joint needs replacing.

Do all propeller shafts fit all Ford Ranger models?

No, propeller shaft length and mountings vary depending on the wheelbase (e.g. Super Cab vs Double Cab) and gearbox type. Always select your vehicle's make, model and engine in our parts finder to find the correct propeller shaft.

Why does my Ford Ranger vibrate under acceleration?

Vibrations during acceleration are frequently caused by wear in the inner CV joint or an imbalance in the propeller shaft. A worn prop shaft centre bearing can also be responsible.

Is it difficult to replace an ABS ring on a Ford Ranger?

It requires removing the CV joint to access the ring. This is a common repair on the Ranger, as the rings often rust away and trigger ABS fault codes.

Can I replace just the CV joint, or do I need to replace the entire drive shaft?

On a Ford Ranger, you can often replace just the outer or inner CV joint if the shaft itself is undamaged. We supply both individual constant velocity joints and complete drive shafts depending on your requirements.

How many drive shafts does a four-wheel-drive Ford Ranger have?

A 4WD Ford Ranger has two front drive shafts (one on each side) and one or two propeller shafts that transfer power to the rear axle and front axle via the transfer box.