GMC Sierra 1500 Standard CAB Pickup

Welcome to your driveline specialist for the GMC Sierra 1500 Standard CAB Pickup. We offer a carefully chosen range of high-quality drivetrain components engineered to keep your truck...

Products for GMC Sierra 1500 Standard CAB Pickup

11 products
1 - 11 of 11
Item no.:3542750
  • Position: Front, Outer
  • Inner splines: 41
  • Seal diameter: 80 mm
  • Outer splines: 33
  • Joint diameter: 112 mm
Item no.:318706
  • Position: Front
  • Splines wheel side: 33
  • Total length: 583 mm
  • Joint diameter, gearbox side: 88 mm
  • Flange diameter: 130 mm
Item no.:356303
  • Position: Outer
  • Inner splines: 35
  • Splines wheel side: 33
  • Seal diameter: 72 mm
  • Outer diameter: 103 mm
Item no.:622080
  • Total length: 93 mm
  • Diameter: 29 mm
Item no.:626687
  • Total length: 92 mm
  • Diameter: 27 mm
Item no.:0819268
  • Inner diameter: 35 mm
  • Hole spacing c/c: 168 mm
Item no.:319784
  • Splines wheel side: 33
  • Total length: 534 mm
Item no.:318849
  • Position: Front
  • Splines wheel side: 33
  • Total length: 550 mm
  • Joint diameter: 160 mm
Item no.:313912
  • Splines wheel side: 33
  • Total length: 580 mm
  • Joint diameter: 150 mm

Drivetrain for GMC Sierra 1500 Standard CAB Pickup

The GMC Sierra 1500 Standard CAB Pickup is an iconic workhorse renowned for its robustness and heavy-hauling capability. Keeping that strength intact requires a drivetrain in top condition. The drivetrain transfers engine power to the driven wheels, and on a full-size pickup like the Sierra 1500, these parts are exposed to tremendous strain—especially when towing or driving off-road. At CVJoint24, we specialise in these critical driveline parts to provide owners with the best possible replacement components.

Our range for the GMC Sierra 1500 Standard CAB Pickup covers everything from complete drive shafts to specific parts such as centre bearings and universal joints. With parts matched precisely to this model, we offer comprehensive coverage. Servicing the drivetrain is essential not only for performance, but also for safety and running costs. A smooth-running driveline improves fuel economy and prevents consequential damage to the gearbox and differentials, saving you money in the long run.

How the drivetrain works on the GMC Sierra 1500 Standard CAB Pickup

The drivetrain on a GMC Sierra 1500 Standard CAB Pickup is engineered to cope with high torque loads. Depending on whether your truck is rear-wheel drive or four-wheel drive, the setup relies on several interacting components. Central to the system is the propeller shaft, which runs beneath the vehicle to transfer drive from the gearbox to the rear axle. On the Standard CAB model, the prop shaft is a critical area because of the specific wheelbase, requiring precision balancing to avoid driveline vibrations.

Four-wheel-drive models also feature front drive shafts and a transfer case. The front driveshafts are fitted with CV joints that allow the wheels to steer and travel with the suspension while continuously delivering power. These joints are protected by rubber CV boots to keep out grit and moisture, which is vital on pickups used in tough conditions. The entire system is built to withstand the forces generated when the bed is fully loaded or when pulling a heavy trailer.

Common faults and symptoms

There are several telltale signs that the drivetrain on your GMC Sierra is wearing out. One of the most frequent symptoms is a vibration felt through the seat or floor at certain road speeds. This often stems from an imbalanced prop shaft or a worn propeller shaft centre bearing. If the vibrations intensify under acceleration, the issue could point towards worn inner constant velocity joints or tired universal joints in the prop shaft.

Another common warning sign is a clicking or popping noise when turning on full lock. This is a classic symptom of a failing outer CV joint, frequently caused by a split CV boot that has let in road dirt. If you hear a metallic clonk when engaging gear or accelerating, there may be excessive play in the propeller shaft splines or U-joints. Ignoring these warnings can lead to total driveline failure, leaving you stranded at the roadside.

Common parts to replace on the GMC Sierra 1500 Standard CAB Pickup

To keep your GMC Sierra 1500 in peak condition, certain driveline parts require periodic inspection and replacement. Here are the key categories for your vehicle:

  • Drive shafts for GMC Sierra 1500 Standard CAB Pickup – Complete shafts for straightforward replacement when wear is severe.
  • Propeller shafts for GMC Sierra 1500 Standard CAB Pickup – The vital link in the driveline, often replaced to cure stubborn vibrations.
  • Outer CV joints for GMC Sierra 1500 Standard CAB Pickup – Crucial for front-axle steering and power transfer on 4WD models.
  • Propeller shaft centre bearings for GMC Sierra 1500 Standard CAB Pickup – Supports the prop shaft and cushions driveline vibrations.

Choosing high-quality spare parts from the start ensures your pickup retains its original towing capacity and road manners. We always recommend inspecting boots and bearings during every routine service to catch wear before it worsens.

Finding the right part for your GMC Sierra 1500 Standard CAB Pickup

Navigate directly to the right category for your GMC Sierra 1500 Standard CAB Pickup:

When troubleshooting driveline issues, it pays to start in the correct section. Comparing parts tailored to the GMC Sierra 1500 Standard CAB Pickup makes it easy to differentiate between drive shaft, CV joint and propeller shaft issues, guiding you straight to the correct replacement:

Sourcing replacement parts for American pickups can sometimes be tricky, as configurations vary between cab styles and model years. For the GMC Sierra 1500 Standard CAB Pickup, it is especially important to verify that the part matches the Standard CAB layout, as propeller shafts and suspension mountings differ from extended cab versions. The most reliable way to find the correct component is to filter by your vehicle's make, model and engine variant.

Selecting your specific vehicle details filters our catalogue down to parts technically verified for your truck. This eliminates guesswork and avoids ordering errors. If you are unsure about a part—such as identifying your specific differential or axle code—our customer support team is on hand to help. We have extensive technical knowledge of GMC drivelines and can help you verify specifications to ensure an exact fit every time.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with extensive stock holding, making us a dependable partner for GMC owners. When you shop with us, you receive a component selected for its precision build and durability. We know your GMC Sierra 1500 Standard CAB Pickup is a working truck, so prompt dispatch and dependable fitment are always our top priorities.

We back our range with a dedicated fitment guarantee for complete peace of mind. By choosing your exact make, model and engine, you can be sure of getting the right part first time. With a clear focus on correct supply and quality parts, we aim to be your long-term source for all driveline components. Our specialist focus ensures expert guidance that general car-parts stores rarely provide, keeping your GMC performing as the rugged workhorse it was built to be.

Frequently asked questions about Drivetrain for GMC Sierra 1500 Standard CAB Pickup

What are the most common signs of a failing propeller shaft on my GMC Sierra?

The most common symptoms are vibrations that intensify with vehicle speed, a clunking noise when shifting between drive and reverse, or a squeaking sound from the centre bearing or universal joints.

Does a drive shaft from a Crew Cab fit my Standard CAB?

The front drive shafts are often identical, but the propeller shaft almost always differs due to the shorter wheelbase on the Standard CAB. Always select your vehicle's exact make, model and engine to ensure the correct fit.

How often should I inspect the CV boots on my pickup?

We recommend a visual inspection at every oil service or at least once a year. A split CV boot quickly leads to constant velocity joint failure caused by water and dirt ingress.

What is covered by your fitment guarantee for the GMC Sierra?

Our fitment guarantee means that when you select your vehicle by make, model and engine variant and order the recommended component, we guarantee that it fits your vehicle mechanically.

Why does my truck vibrate under acceleration even though the tyres are balanced?

If vibrations occur specifically under load (acceleration), this is often caused by worn inner CV joints or an unbalanced prop shaft rather than wheel balance issues.

Do you supply complete propeller shafts for the Sierra 1500 Standard CAB?

Yes, we supply complete propeller shafts that are balanced and ready to install, which is often a far more reliable solution than attempting to overhaul a severely damaged original shaft.