Honda Crosstour

Welcome to CVJoint24, the international shop of a Swedish driveline specialist. For your Honda Crosstour, we supply a curated selection of premium spare parts designed to restore optimal...

Products for Honda Crosstour

4 products
1 - 4 of 4
Item no.:148733
  • Position: Inner
  • Splines gearbox side: 29
  • Splines wheel side: 34
  • Total length: 159 mm
  • ABS teeth: 34
Item no.:544863
  • Position: Rear, Inner
  • Inner splines: 20
  • Seal diameter: 35 mm
  • Total length: 163,5 mm
  • Joint diameter: 69 mm
Item no.:353347
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 68 mm
  • Outer splines: 30
  • Thread size: M26X1,5
Item no.:0654241
  • Total length: 83 mm

Drivetrain for Honda Crosstour

The Honda Crosstour is a distinctive vehicle that combines the qualities of a saloon with the versatility of an SUV. This pairing places specific demands on the vehicle's Honda drivetrain, as it regularly handles heavier loads and more varied driving conditions than a standard passenger car. The power transmission in a Crosstour is engineered to deliver torque efficiently to the wheels, whether in front-wheel-drive or all-wheel-drive guise. Maintaining these components is vital to preserve the car's handling and safety. As a Swedish driveline specialist, we understand the technical nuances of this model and supply parts that meet or exceed original equipment specifications.

When discussing the drivetrain of a Honda Crosstour, we refer to the entire mechanical assembly from the gearbox out to the road wheels. This includes drive shafts, joints and CV boots, all operating in close harmony. Because the Crosstour is a relatively heavy vehicle, these components are subjected to substantial torque, making wear inevitable over time. By selecting the correct spare parts, you extend the vehicle's working life and prevent expensive knock-on damage to other drivetrain components.

How the Honda Crosstour drivetrain is engineered

The layout of the drivetrain on the Honda Crosstour is sophisticated, focusing on both passenger comfort and long-term durability. The system relies on several critical components working together to convert engine output into smooth motion. Central to this setup are the drive shafts, which are fitted with inner and outer CV joints. The outer joints allow the front wheels to steer while continuously transferring driving force, while the inner joints accommodate the vertical movement of the suspension and absorb changes in shaft length during driving.

On all-wheel-drive variants, the system also incorporates a propeller shaft and a rear differential, adding mechanical complexity. Every link in this chain must operate without fault to eliminate vibrations or power loss. Honda designed the Crosstour drivetrain to minimise friction and interior noise levels, setting high standards for the precision of replacement parts. Fitting components manufactured with inaccurate tolerances can quickly cause imbalance and premature wear on gearbox bearings and oil seals.

Common faults and symptoms

Several clear symptoms suggest that the drivetrain in your Honda Crosstour is beginning to fail. One of the most frequent signs of a worn inner CV joint is vibration felt under acceleration. This shudder often spreads through the whole body shell and can vary with road speed and engine load. If the vibration disappears the moment you lift off the accelerator, this strongly indicates wear in the inboard driveline. It is typically caused by pitting or grooving inside the joint housing, which creates mechanical imbalance under load.

Another common symptom is a clicking or knocking noise at full steering lock, which normally points to a worn outer CV joint. This noise typically speeds up in direct proportion to wheel rotation. In addition, you should inspect the CV boots regularly for signs of grease leakage or cracking. Once a CV joint boot splits, lubricating grease escapes and road dirt and moisture penetrate, rapidly ruining the joint. Catching these problems early can save you significant expense, as replacing a simple drive shaft boot is far cheaper than buying an entire CV joint or complete driveshaft.

Frequent replacement parts for Honda Crosstour

On the Honda Crosstour, it is particularly the inner CV joint that tends to require attention. Due to the vehicle's suspension geometry and driveline operating angles, the inboard joint experiences substantial stress. We supply dedicated solutions for this application, such as an Inner CV joints for Honda Crosstour, manufactured to withstand the specific operating demands of this model. Replacing only the worn constant velocity joint rather than the entire drive shaft is often a cost-effective way to restore factory performance without compromising on reliability.

Beyond CV joints, protective boots and ABS rings are parts that regularly need replacing. A cracked or corroded ABS ring can send erratic wheel-speed signals to safety control modules, illuminating the ABS warning light or causing unwanted braking intervention. Sourcing your components from a driveline specialist ensures that CV boots are manufactured from resilient rubber compounds designed to withstand harsh European winters, road grit and de-icing salts that might otherwise cause premature perishing. Our range is carefully chosen to ensure the highest possible dependability for your Crosstour.

Find the right part for your Honda Crosstour

Navigate directly to the relevant parts section for your Honda Crosstour:

When dealing with driveline issues, selecting the correct subcategory immediately saves time. By comparing the specific part groups for the Honda Crosstour, it is straightforward to distinguish between faults in the drive shaft, CV joint or propeller shaft, allowing you to proceed directly to the page that matches your symptoms and fitment needs.

Once you have identified the appropriate category, always check for specific differences between the left- and right-hand sides, or whether the component is intended for the front or rear axle. Our product listings provide detailed dimensions and technical specifications to help you make an informed purchase. If you are ever unsure, our specialist technical support team is on hand to guide you to the exact drivetrain components you require.

Why shop with CVJoint24

CVJoint24 is far more than a standard car parts supplier; we are an international shop backed by Swedish driveline specialists, operating from our central warehouse in Helsingborg, Sweden. Our philosophy centres on technical expertise and deep product coverage across all drivetrain components. When shopping with us, our precise fitment check guarantees that selecting your car's make, model and engine variant ensures the parts you receive will fit accurately, providing total peace of mind.

We understand that when your car is off the road, receiving replacement parts quickly is essential. We dispatch fast across the European Union so that your Honda Crosstour can be back in service without delay. Our goal is to make it easy to source the correct part the first time, giving you confidence in both product quality and value. With our focus on durable components and knowledgeable advice, we are your reliable partner for keeping your vehicle's drivetrain in optimal condition year after year.

Frequently Asked Questions about Drivetrain Parts for Honda Crosstour

What are the most common signs of a failing inner CV joint on a Honda Crosstour?

The most common signs are body vibrations under acceleration that disappear when you lift off the accelerator. You might also notice a dull clunking or knocking noise at lower speeds.

Can I replace just the inner CV joint, or do I need to replace the entire drive shaft?

On the Honda Crosstour, you can easily replace just the inner CV joint, which is often a far more economical solution than replacing the entire drive shaft.

How do I know that the parts will fit my Honda Crosstour?

By selecting your vehicle's make, model and engine variant in our search filter, you will find parts with a guaranteed fit, ensuring they match your car perfectly.

Do you offer fast delivery on drivetrain parts?

Yes, we offer fast delivery across Europe on stocked items, so you can get your car repaired without unnecessary delays.

Why does my car only vibrate when accelerating?

This is a classic symptom of worn inner CV joints. When torque is transferred under load, the internal wear creates an imbalance that results in noticeable vibrations.

What is included when I buy an inner CV joint from you?

Our inner CV joints are supplied as complete kits, which typically include the joint itself, a model-specific CV boot, specialised grease and all necessary mounting hardware.