Honda FIT I

Welcome to CVJoint24, the international shop of a Swedish driveline specialist offering quality drivetrain and power transmission parts for the Honda FIT I. Sourcing the right spare...

Products for Honda FIT I

2 products
1 - 2 of 2
Item no.:147833
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 35 mm
  • Total length: 63 mm
  • Joint diameter: 75 mm
Item no.:143083
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 35 mm
  • Total length: 53 mm
  • Joint diameter: 75 mm

Drivetrain for Honda FIT I

The Honda FIT I is renowned for its clever packaging and dependability in urban environments. The drivetrain is the core of the car's ability to move efficiently and smoothly. As the owner of a Honda FIT I, it is vital to understand that power transmission relies on several interacting components that must all remain in good condition to keep the drive smooth and vibration-free. A well-functioning drivetrain not only reduces wear on other parts of the vehicle, such as wheel bearings and the gearbox, but also supports lower fuel consumption and a safer driving experience for everyone on board. At CVJoint24, we specialise in these exact components to help you maintain your car's performance for many years to come, whatever the driving conditions.

How the drivetrain is engineered on the Honda FIT I

The layout of the drivetrain on the Honda FIT I follows the classic, efficient principle of front-wheel-drive cars with a transverse engine. Power generated by the engine passes through the gearbox and is distributed to the front wheels via two drive shafts. Each drive shaft is fitted with two joints: an inner CV joint mounted directly to the gearbox and an outer CV joint at the wheel hub. This design accommodates both suspension travel and steering movements while transferring power continuously and without loss. For Honda, manufacturing precision is paramount, which places high demands on the spare parts used during repairs. Understanding the interplay between these components is key to diagnosing problems early before they cause extensive damage to the vehicle.

Common faults and symptoms

There are several clear signs that something is wrong with the drivetrain on your Honda FIT I that you should watch out for. One of the most common symptoms is vibration that occurs specifically under acceleration or under load when climbing hills. This typically points to wear in the inner CV joint, where play has developed between the moving components inside the joint housing. If you instead hear a rhythmic clicking noise when turning on full lock at low speeds, the outer constant velocity joint is usually worn. It is also essential to inspect the CV boots regularly. If a boot splits, vital lubricating grease escapes while dirt and water enter, causing the joint to fail very quickly. Ignoring these early warning signs can lead to the entire driveshaft needing replacement, which is a far more costly repair.

Frequently replaced parts on the Honda FIT I

When maintaining a Honda FIT I, there is consistent demand for specific components subjected to high wear over time. The most prominent part in our current range for this model is the inner CV joint for the Honda FIT I. This component is critical for eliminating irritating vibrations that can resonate through the chassis while driving. Alongside the joints themselves, it is common to replace CV boots, clamps and related hardware to guarantee a secure, durable installation. Because the FIT I is a compact car with tight engineering tolerances, it is particularly important that replacement car parts have the exact dimensions and correct material specifications. Replacing worn parts promptly prevents consequential damage to more expensive assemblies like the gearbox, saving you both time and money in the long run.

How to find the right part for your Honda FIT I

Navigate directly to the relevant section for the Honda FIT I:

When troubleshooting a car with multiple potential driveline issues, it is sensible to start in the correct category straight away. By comparing the exact sections for the Honda FIT I, you can more easily distinguish between faults in the drive shaft, CV joint or propeller shaft, and proceed to the page that best matches your symptoms and fitment requirements.

We always recommend double-checking the technical specifications in the product description against your existing part if you are carrying out the repair yourself, though our system is designed to provide maximum accuracy right from your initial search.

Why buy from CVJoint24

CVJoint24 is not just another online car parts shop; we are the international shop of a Swedish driveline specialist, putting quality and customer satisfaction first. When you shop with us, you benefit from extensive technical expertise and an inventory depth that few can match. We always provide a dependable fitment guarantee, ensuring total peace of mind that the parts you order will fit your Honda FIT I correctly. By helping you choose the right part from the start, we minimise the hassle of returns and prevent unnecessary vehicle downtime. We also offer fast dispatch across Europe so you receive your parts promptly when you need them most. Choose a specialist that understands your vehicle's driveline inside out and prioritises your safety on the road.

Frequently Asked Questions about Drivetrain Parts for Honda FIT I

How do I know if the inner CV joint on my Honda FIT I is failing?

The most common symptom is car vibration occurring under acceleration. These vibrations typically disappear as soon as you lift off the accelerator, which distinguishes the issue from an unbalanced wheel.

Can I replace just the CV boot if the joint is still working?

Yes, if you catch a damaged boot early before dirt has entered or the grease has leaked out completely, you can save the joint simply by replacing the boot and repacking it with fresh grease.

Do your CV joints fit all versions of the Honda FIT I?

We strongly recommend selecting your exact make, model and engine variant. There are differences in spline counts and dimensions, so careful verification is needed to ensure a guaranteed fit.

What is included when I buy an inner CV joint for my Honda?

Our inner CV joints are supplied as complete kits, which typically include the joint itself, a model-specific CV boot, high-grade grease, and the necessary circlips and clamps.

Why does my Honda FIT I vibrate under acceleration but not at a steady speed?

This is a classic symptom of a worn inner CV joint. When the joint is loaded during acceleration, excess play within its internal tracks creates noticeable vibrations.

How quickly do you deliver drivetrain parts for Honda FIT I?

We offer fast delivery across Europe for most of our stocked parts, helping you get your car back on the road in no time.