Honda FR V

Spare parts and drivetrain components for Honda FR V.

Products for Honda FR V

39 products
1 - 24 of 39
Item no.:0568324
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 63 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:140178
  • Position: Inner
  • Inner splines: 30
  • Seal diameter: 40 mm
  • Total length: 36 mm
  • Joint diameter: 83 mm
Item no.:240534
  • Position: Inner
  • Inner splines: 30
  • Seal diameter: 40 mm
  • Total length: 58,4 mm
  • Joint diameter: 80 mm
Item no.:2144146
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 560 mm
Item no.:2176081
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 28
  • Total length: 638 mm
  • Joint diameter: 93 mm
Item no.:0578638
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 63 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:0646854
  • Outer diameter: 26 mm
Item no.:340736
  • Position: Front, Inner
  • Inner splines: 32
  • Seal diameter: 40 mm
  • Total length: 155,5 mm
  • Outer splines: 27
Item no.:3536625
  • Position: Front, Outer
  • Inner splines: 32
  • Seal diameter: 60 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:358090
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 63 mm
  • Outer splines: 26
  • Joint diameter: 84 mm
Item no.:0968322
  • Inner diameter: 44 mm
  • Outer diameter: 68 mm
Item no.:249849
  • Position: Front right, Inner
  • Inner splines: 30
  • Seal diameter: 40 mm
  • Total length: 152,5 mm
  • Joint diameter: 80 mm
Item no.:0988855
  • Inner diameter: 35 mm
  • Outer diameter: 58 mm
Item no.:0914415
  • Inner diameter: 40 mm
  • Outer diameter: 56 mm
Item no.:0605589
  • Total length: 120 mm
Item no.:0699165
Item no.:0934654
  • Inner diameter: 42 mm
  • Outer diameter: 58 mm
Item no.:249158
  • Position: Front right, Inner
  • Inner splines: 32
  • Seal diameter: 40 mm
  • Total length: 58,5 mm
  • Joint diameter: 83 mm
Item no.:0125241
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 442 mm
Item no.:351095
  • Position: Front, Outer
  • Inner splines: 30
  • Splines wheel side: 28
  • Seal diameter: 62 mm
  • Outer diameter: 93 mm
Item no.:0948535
  • Inner diameter: 35 mm
  • Outer diameter: 58 mm
Item no.:0988043
  • Inner diameter: 41 mm
  • Outer diameter: 56 mm
Item no.:0641583
  • Total length: 84 mm
Showing 1–24 of 39 products

Drivetrain for Honda FR V

The Honda FR V is a unique model on the European market, renowned for its innovative 3+3 seating layout and reliable Japanese engineering. Yet even a robust Honda build faces substantial strain across the drivetrain, especially when carrying full family loads and heavy luggage as intended. The drivetrain transfers power from the engine straight to the road, and every component within this system must operate in total harmony. For Honda FR V owners, worn driveline components not only degrade comfort through vibrations and unwanted noises, but can also compromise road safety. As driveline specialists, we supply the precise parts needed to restore your car's original performance, focusing on long-lasting durability and technical precision.

How the drivetrain is engineered on the Honda FR V

The drivetrain architecture on a Honda FR V uses a well-conceived front-wheel-drive layout prioritising cabin space and efficiency. The setup relies primarily on two drive shafts running from the gearbox out to the front wheels. Each side features an inner CV joint mounted at the gearbox and an outer CV joint located at the wheel hub. The inner joint is engineered to accommodate axial plunge as the suspension moves up and down over uneven surfaces. The outer constant velocity joint maintains steady power transmission even at full steering lock. On a Honda FR V, these parts are precisely dimensioned for the vehicle's torque and weight distribution, making the correct replacement specifications vital for long service life and minimal wear on surrounding assemblies.

Common faults and symptoms

Spotting drivetrain issues early saves both time and expensive workshop bills. On a Honda FR V, the classic sign of a worn outer CV joint is a rhythmic clicking or knocking noise clearly audible when accelerating through tight turns, such as at junctions or roundabouts. If you experience chassis vibrations at specific speeds or under hard acceleration, play in an inner CV joint is frequently the culprit. Another critical warning sign is grease spattered across the inner wheel rim or suspension, indicating a split CV boot. Once the boot fails, lubricating grease escapes rapidly whilst road dirt enters, ruining the joint within very few kilometres. Routine inspection of these rubber boots provides cheap insurance against major driveline failures.

Common replacement parts for Honda FR V

When maintaining your Honda FR V, certain components endure more mechanical stress depending on driving style and mileage. Our range includes a curated selection of components tailored specifically for this model. We currently stock the following categories for Honda FR V:

  • Drive shafts for Honda FR V: Complete assemblies including inner and outer joints, offering the safest choice when resolving extensive driveline wear.
  • Outer CV joints for Honda FR V: The most frequently replaced joint, taking the brunt of steering angles and acceleration forces.
  • Inner CV joints for Honda FR V: Precision components that often resolve tricky drivetrain vibrations under load.

Targeting the correct category ensures you address the root cause directly, returning your Honda to smooth, quiet running without unnecessary expense.

How to find the right part for your Honda FR V

Navigate directly to the appropriate section for your Honda FR V:

With several interconnected driveline parts, starting in the right subcategory saves valuable time. Comparing the specific component groups for Honda FR V makes it simple to distinguish between issues in a driveshaft, CV joint or propeller shaft, taking you directly to the parts that match your symptoms and technical dimensions.

Navigating replacement parts can feel complex, particularly as the Honda FR V was produced with diverse petrol and diesel engine options that carry varying shaft lengths and joint dimensions. To help you choose with confidence, simply filter our catalogue by your vehicle's make, model and engine variant. This ensures you receive components with the exact spline count, correct overall length and full ABS reluctor ring compatibility. Sourcing the right parts for your Honda FR V is straightforward and reliable, keeping your vehicle out of the garage and safely on the road.

Why shop at CVJoint24

CVJoint24 is not just another car parts shop; we are the international store of a Swedish specialist in All car makes drivetrain components, shipping directly from our central warehouse in Helsingborg, Sweden across the EU. Our singular focus on the driveline allows us to provide uncompromising component quality and expert technical support. For Honda FR V owners, this means direct access to deep stock holding and robust parts engineered for demanding road conditions. By specialising purely in drivetrain components, we help you secure the correct part first time, every time. Welcome to a specialist that truly understands your vehicle's mechanical requirements.

Frequently Asked Questions about Drivetrain for Honda FR-V

How do I know if my Honda FR-V needs a new outer CV joint?

The most common sign is a clicking or knocking noise when taking a sharp turn whilst accelerating. If the sound disappears when driving straight ahead, it is almost certainly a worn outer CV joint.

Why does my Honda FR-V vibrate under acceleration?

Vibrations during acceleration, particularly at speeds between 50 and 80 km/h, are often caused by wear in the inner CV joint. This creates an imbalance in the drive shaft that transmits through the car's chassis.

How do I find the right drive shaft for my vehicle?

Simply select your Honda FR-V make, model, year and engine variant on our website. This filters down to the exact components technically verified to fit your car.

Is it better to replace the entire drive shaft or just the CV joint?

If several parts on the shaft are worn or the vehicle has covered high mileage, replacing the complete drive shaft is often more time-efficient and cost-effective. It also ensures that all components are brand new and properly balanced.

What happens if a CV boot splits on my Honda?

If the boot splits or tears, the grease escapes and dirt enters. This quickly ruins the CV joint. If you spot a damaged CV boot early, you can save money by simply replacing the boot and repacking the joint with fresh grease.

Does the same CV joint fit both the left and right side on the Honda FR-V?

This varies depending on the model year and engine variant. Outer CV joints are frequently identical on both sides, whereas the drive shafts and inner joints often differ in length and design between the left and right.