Honda HR V

Spare parts and drivetrain components for the Honda HR V.

Products for Honda HR V

56 products
49 - 56 of 56
Item no.:0959077
  • Total length: 56 mm
  • Diameter: 20 mm
Item no.:0955888
  • Inner diameter: 40 mm
  • Outer diameter: 56 mm
Item no.:0989511
  • Inner diameter: 35 mm
  • Outer diameter: 50 mm
Item no.:3587659
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 68 mm
  • Outer splines: 30
  • Thread size: M26X1,5
Item no.:3586200
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 68 mm
  • Outer splines: 30
  • Thread size: M26X1,5
Item no.:2199157
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 625 mm
Item no.:1192204
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 673 mm
Item no.:354039
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 68 mm
  • Outer splines: 30
  • Total length: 152 mm
Showing 49–56 of 56 products

Drivetrain for Honda HR V

The Honda HR V is a versatile crossover that requires premium-quality components to deliver the performance and safety expected of the brand. The drivetrain is the core of the vehicle's power transmission, responsible for transferring the engine's power efficiently to the wheels. Because the Honda HR V is often driven in varied environments, from city streets to light off-road tracks, the drivetrain components are subjected to significant stress. Maintaining these parts properly is vital to prevent expensive repairs and ensure the vehicle's handling characteristics remain intact over time.

Here at CVJoint24, you will find a dedicated range covering the most critical components of your car's transmission system. We focus on offering parts that not only fit mechanically, but also match or exceed original equipment standards. Choosing the right spare parts extends the service life of your car and protects its resale value, giving you complete confidence on the road knowing that every component has been carefully selected by specialists.

How the Honda HR V drivetrain is built

The drivetrain on a Honda HR V is a sophisticated assembly that varies depending on whether the car is front-wheel drive or equipped with all-wheel drive. At its heart, the system consists of a gearbox that distributes power via drive shafts to the front wheels. For all-wheel-drive models, a Honda HR V propeller shaft transfers torque to the rear axle whenever extra traction is required. This setup demands that all components operate in total harmony to minimise energy loss and vibrations.

The drive shafts feature constant velocity joints that allow the wheels to move with the suspension and steer while continuously delivering rotational force. The outer CV joint sits closest to the wheel and handles the widest articulation angles during steering. Inner CV joints sit closer to the gearbox and primarily accommodate suspension travel. To protect these precision joints, flexible CV boots retain the lubricating grease and seal out road dirt and moisture, which is essential for prolonging drivetrain life on your Honda HR V.

Common faults and symptoms

There are several distinct signs indicating that a component in your Honda HR V drivetrain is wearing out. One of the most typical symptoms is a rhythmic clicking or knocking noise when cornering on full lock while accelerating. This often points to a worn Honda HR V outer CV joint or dirt ingress caused by a split CV boot. If you instead experience shaking or vibrations throughout the car under acceleration, this can indicate an unbalanced driveshaft or excessive play in the inner joints.

On all-wheel-drive models, vibrations that occur at specific road speeds can frequently be traced back to the prop shaft or its centre bearing. Another common issue is an illuminated ABS warning light or unintended ABS activation at low speeds. This is often caused by a cracked or corroded ABS reluctor ring interfering with the wheel speed sensor's signal. By addressing these symptoms early, you can often simply replace an individual part before it causes consequential damage to other driveline components.

Common parts to replace on the Honda HR V

Depending on driving style and mileage, certain components require replacement more regularly on the Honda HR V. We have categorised these to help you quickly identify the exact part for your vehicle. Here are the most common product groups we supply:

  • Drive shafts for Honda HR V – available in multiple versions to suit various engines and fitting positions.
  • Outer CV joints for Honda HR V – a critical component for smooth steering and reliable power transfer.
  • Propeller shafts for Honda HR V – available in 2 variants for all-wheel-drive versions.
  • ABS rings for Honda HR V – an essential safety part for proper braking system performance.

Replacing an entire drive shaft assembly can sometimes prove more cost-effective than replacing an individual joint, especially if the original shaft has covered high mileage or shows signs of corrosion. Our car parts are engineered to withstand demanding European driving conditions, ensuring long-lasting reliability after installation.

How to find the right part for your Honda HR V

Select the relevant subcategory for your Honda HR V:

With multiple drivetrain components in play, it pays to begin in the right category from the start. By reviewing the specific product sections for the Honda HR V, you can easily distinguish between drive shaft, CV joint, or prop shaft issues and navigate straight to the parts matching your symptoms and specifications.

Finding the correct replacement part for your Honda HR V is straightforward once you know your car's details, as specifications can vary between different model years, engine options, and gearboxes. The simplest way to ensure an exact fit is to select your car's make, model, and engine variant in our vehicle selector. This filters our catalogue down to parts technically compatible with your specific car, preventing incorrect orders and saving time during installation.

When choosing components, it is also sensible to confirm technical dimensions such as the tooth count on the ABS ring or the spline count on the drive shaft if your original unit is removed. We aim to provide clear, detailed specifications for every product. If you have any questions regarding fitment for your Honda HR V, our expert customer service team is always on hand to assist. Remember that a correctly matched component guarantees straightforward installation and keeps your car's safety systems working as intended.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching directly from our central warehouse in Helsingborg, Sweden, to drivers across Europe. By focusing on a dedicated, in-depth driveline inventory, we provide technical know-how that general car parts stores rarely offer. When you shop with us, you receive high-precision, premium parts carefully chosen to endure demanding road conditions and harsh European winters. Our commitment to driveline engineering means our catalogue is continually updated with dependable solutions for your Honda HR V.

We combine deep technical expertise with a straightforward ordering experience. With our easy vehicle selection by make, model, and engine alongside fast dispatch across the EU, we help get your car back on the road without delay. As driveline specialists, we understand the practical challenges involved in repair work and provide reliable guidance whenever needed. Choose CVJoint24 for dependable components, genuine expertise, and parts built to last for your Honda HR V.

Frequently asked questions about Honda HR V drivetrains – Spare parts with a perfect fit

How do I know if the drive shaft on my Honda HR V needs replacing?

The most common signs are vibrations under acceleration or unusual noises when driving. If you notice the car shaking excessively when you accelerate, it may be due to imbalance or wear in the drive shaft's inner joints.

Why is there a clicking noise when I turn in my Honda HR V?

A clicking noise when cornering is a classic sign of a worn outer CV joint. This is often caused by a split CV boot, which allows the lubricating grease to escape and dirt to penetrate the joint.

Does the same propeller shaft fit all Honda HR V models?

No, propeller shafts vary depending on the model year and drivetrain. We currently have two different versions in stock. Select your car's make, model and engine to find the exact propeller shaft for your vehicle.

Can a damaged ABS ring affect the car's braking performance?

Yes, a damaged ABS ring sends incorrect signals to the vehicle's control unit, which can cause the ABS system to pulsate during normal braking or trigger the warning light, which in turn may disable the safety system.

Is it difficult to replace a drive shaft yourself on a Honda HR V?

It requires some mechanical experience and the right tools, such as a heavy-duty socket for the hub nut. If you are unsure, we always recommend consulting a professional garage, but we supply precision-fit parts to make the job as straightforward as possible.

How often should I check the CV boots on my Honda HR V?

We recommend inspecting the CV boots at every service or wheel change. An intact boot is the cheapest insurance against having to replace an entire CV joint or drive shaft later on.