Honda Odyssey

Spare parts and drivetrain components for Honda Odyssey.

Products for Honda Odyssey

35 products
1 - 24 of 35
Item no.:115718
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 30
  • Total length: 720 mm
Item no.:0977008
  • Inner diameter: 40 mm
  • Outer diameter: 56 mm
Item no.:0932821
  • Inner diameter: 35 mm
  • Outer diameter: 54 mm
Item no.:0953924
  • Inner diameter: 44 mm
  • Outer diameter: 68 mm
Item no.:0627993
  • Total length: 115 mm
Item no.:0581435
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 64 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:316432
  • Splines gearbox side: 27
  • Splines wheel side: 28
Item no.:642322
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 35 mm
  • Total length: 53,5 mm
  • Joint diameter: 66 mm
Item no.:657144
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 55 mm
  • Outer splines: 23
  • ABS teeth: 50
Item no.:623278
  • Total length: 52 mm
  • Diameter: 20 mm
Item no.:0659541
Item no.:340368
  • Position: Front right, Inner
  • Inner splines: 32
  • Seal diameter: 40 mm
  • Total length: 58,5 mm
  • Joint diameter: 83 mm
Item no.:7306314
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 640 mm
  • Diameter 1: 92 mm
  • Diameter 2: 84 mm
Item no.:641407
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 35 mm
  • Total length: 154,5 mm
  • Outer splines: 23
Item no.:294786
  • Position: Front right
  • Splines gearbox side: 32
  • Splines wheel side: 32
  • Total length: 451 mm
Item no.:0922317
  • Inner diameter: 35 mm
  • Outer diameter: 78 mm
Item no.:0625692
  • Total length: 103 mm
Item no.:0907569
  • Inner diameter: 40 mm
  • Outer diameter: 66 mm
Item no.:350548
  • Position: Front, Outer
  • Inner splines: 35
  • Splines wheel side: 28
  • Seal diameter: 64 mm
  • ABS teeth: 50
Item no.:0650603
  • Total length: 78 mm
Item no.:0644373
  • Total length: 84 mm
Item no.:0606774
  • Total length: 110 mm
Showing 1–24 of 35 products

Drivetrain for Honda Odyssey

The Honda Odyssey is renowned for its spaciousness and reliability as a practical MPV. Maintaining these qualities requires a drivetrain in peak condition. The drivetrain transfers engine power to the wheels, and on a front-wheel-drive vehicle like the Odyssey, this involves a sophisticated assembly of drive shafts and joints. Investing in the correct car parts is vital not only for performance, but also for passenger safety. At CVJoint24, we understand the specific demands of the Honda Odyssey and supply components engineered to meet or exceed original equipment standards. Maintaining your vehicle's driveline prevents costly consequential damage and ensures smooth, vibration-free driving for many thousands of kilometres to come.

How the drivetrain is engineered on the Honda Odyssey

The Honda Odyssey drivetrain is designed primarily around a front-wheel-drive (FWD) layout. Power leaves the gearbox and travels along the drive shafts to the front wheels. Each driveshaft incorporates two critical components: an inner and an outer CV joint. The inner joint sits closest to the gearbox, accommodating the up-and-down movement of the suspension. The outer constant velocity joint sits at the wheel hub and is more complex, as it must handle both suspension movement and steering angles. These joints are protected by flexible rubber CV boots that retain grease and seal out road dirt. Because the Odyssey is often loaded heavily for family trips, these parts endure considerable stress, making robust construction and quality materials essential for long service life.

Common faults and symptoms

There are several clear signs that the drivetrain on your Honda Odyssey is wearing out. One of the most typical symptoms of a failing outer CV joint is a distinct clicking or knocking noise on full steering lock during acceleration. If you notice vibrations through the steering wheel or body shell under load, an inner CV joint may be worn or suffering from grease starvation. Another telltale warning sign is grease splattered around the inside of the wheel rim or wheel arch, indicating a split CV boot. When a boot tears, dirt enters the joint and quickly causes catastrophic failure. Ignoring these warning signs can result in a snapped drive shaft, leaving you stranded with no drive.

Common replacement parts for the Honda Odyssey

On the Honda Odyssey, constant velocity joints require periodic inspection and eventual replacement. Our range includes dedicated solutions for both ends of the driveshaft. The most relevant categories for your vehicle are:

  • Outer CV joint Honda Odyssey
  • Inner CV joint Honda Odyssey

An outer CV joint for Honda Odyssey is usually the first component to wear out due to the high steering angles at the wheel. However, an inner CV joint for Honda Odyssey may also require replacement if shuddering or vibrations develop under acceleration. Alongside the joints themselves, always inspect the drive shaft boots. An intact, securely sealed boot is the most cost-effective safeguard against premature joint failure. When fitting replacement parts on your Honda, we also recommend replacing circlips and hub nuts to ensure a safe and professional installation.

How to find the correct parts for your Honda Odyssey

Navigate directly to the relevant section for your Honda Odyssey:

With multiple drivetrain components to consider, starting in the right category saves valuable time. By comparing the exact subcategories for your Honda Odyssey, it is easy to distinguish between drive shaft, CV joint, or propeller shaft issues and select the parts that match your symptoms and vehicle fitment.

Finding the right component for a Honda Odyssey can seem challenging, as specifications vary between model years and engine options. The most reliable way to secure an exact fit is to select your vehicle's make, model, and engine variant in our catalogue. We will instantly filter the parts that are technically verified for your specific car. It is still wise to verify technical details, such as inner and outer spline counts, as well as ABS ring specifications if your vehicle uses a reluctor ring on the joint. Our system ensures you find the right part quickly, preventing ordering errors and keeping workshop downtime to a minimum.

Why choose CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, shipping quality components across Europe from our central warehouse in Helsingborg, Sweden. Unlike general car parts retailers, we focus exclusively on driveline technology. Buying from us gives you access to precision-engineered parts that easily handle the stresses of modern multi-purpose vehicles like the Honda Odyssey. We combine extensive technical expertise with an easy-to-use vehicle search, ensuring you find the right part without guesswork. With our deep inventory of constant velocity joints and drive shafts, you can trust our components to fit accurately and last. We are dedicated specialists who put vehicle reliability and passenger safety first.

Frequently Asked Questions about Honda Odyssey Drivetrains - Spare Parts & CV Joints

How do I know if my Honda Odyssey needs a new outer CV joint?

The most common sign is a clicking noise on full steering lock during acceleration. If the noise disappears when driving straight ahead, it is almost certainly the outer CV joint.

Why does my Honda Odyssey vibrate under acceleration?

Vibrations that occur specifically under acceleration often point to wear in an inner CV joint. This happens because the joint can no longer transfer torque smoothly.

Can I replace just the CV boot if it is split?

Yes, if you catch the damage early and the joint is still clean and properly lubricated, you can replace just the CV boot to save money.

How do I find the correct CV joint for my Odyssey?

Select your vehicle's make, model and engine in our search filter. This is the most reliable way to find parts matched to your specific model year and engine variant.

What happens if I drive with a failing CV joint?

In the worst case, the joint can fail completely, causing the drive shaft to come loose and resulting in a total loss of drive, which can be very dangerous in traffic.

Is there a difference between CV joints for cars with and without ABS?

Yes, vehicles with ABS often require a CV joint fitted with an integrated ABS ring or a specific reluctor groove. Always check this specification before ordering.