Honda Prelude

Spare parts and drivetrain components for Honda Prelude.

Products for Honda Prelude

65 products
1 - 24 of 65
Item no.:1142655
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 630 mm
  • ABS teeth: 50
Item no.:2158253
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 585 mm
  • ABS teeth: 50
Item no.:0384690
  • Position: Front
  • ABS teeth: 50
  • Inner diameter: 91 mm
  • Outer diameter: 97,7 mm
  • Width: 9 mm
Item no.:0622318
  • Outer diameter: 23 mm
  • Diameter: 91 mm
Item no.:219312
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 630 mm
  • ABS teeth: 50
Item no.:116623
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 585 mm
  • ABS teeth: 50
Item no.:0559812
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 64 mm
  • Outer splines: 28
  • ABS teeth: 50
Item no.:0581067
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 60 mm
  • Outer splines: 28
  • ABS teeth: 50
Item no.:0598849
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 55 mm
  • Outer splines: 26
  • ABS teeth: 50
Item no.:7314972
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 55 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:0534047
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 23
  • Seal diameter: 45 mm
  • Outer splines: 23
Item no.:0451715
  • Position: Inner
  • Inner splines: 27
  • Seal diameter: 40 mm
  • Outer splines: 32
Item no.:7310829
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 26
  • Seal diameter: 49 mm
  • ABS teeth: 100
Item no.:7310830
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 26
  • Seal diameter: 49 mm
  • ABS teeth: 50
Item no.:0379271
  • Position: Front
  • ABS teeth: 50
  • Inner diameter: 84 mm
  • Outer diameter: 91 mm
  • Width: 9 mm
Item no.:0377261
  • Position: Front
  • ABS teeth: 50
  • Inner diameter: 84 mm
  • Outer diameter: 91 mm
  • Width: 9 mm
Item no.:331847
  • ABS teeth: 50
  • Inner diameter: 84 mm
  • Outer diameter: 91 mm
  • Width: 9 mm
Item no.:0532802
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 49 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:1142415
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 610 mm
  • Joint diameter: 85 mm
Item no.:1192371
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 610 mm
  • ABS teeth: 50
Item no.:2174960
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 597 mm
  • Joint diameter: 84 mm
Item no.:2176210
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 597 mm
  • ABS teeth: 50
Item no.:1139409
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 924 mm
  • ABS teeth: 50
Item no.:0356834
  • Position: Front
  • ABS teeth: 100
  • Inner diameter: 84 mm
  • Outer diameter: 96 mm
  • Width: 9 mm
Showing 1–24 of 65 products

Drivetrain for Honda Prelude

The Honda Prelude is an iconic sports coupé that requires top-quality components to maintain its sharp handling characteristics. The drivetrain is the core of your vehicle's power transmission, responsible for directing engine power to the front wheels with minimal loss and maximum precision. Here at CVJoint24, you will find a carefully selected range of parts engineered specifically for the Honda Prelude. With an extensive inventory, we cater to most requirements for this model series, from early generations to the final versions that rolled off the production line.

Maintaining the drivetrain on a car like the Prelude is essential to preserve its sporty feel. Worn components do not just cause strange noises; they also negatively affect the car's road holding and acceleration. We understand the importance of precise fitment, which is why our parts are manufactured to meet or exceed original equipment specifications. Choosing the right spare parts ensures that your Honda remains reliable and engaging to drive, whether for daily commuting or spirited driving along winding roads.

How the drivetrain is configured on the Honda Prelude

The Honda Prelude uses a front-wheel-drive layout where power is transferred from the transversely mounted engine through the gearbox to the front wheels. The system relies on several critical components working in unison. Central to this setup are the drive shafts, which act as the direct links between the gearbox and the wheel hubs. Each drive shaft is fitted with two joints: an inner CV joint positioned next to the gearbox and an outer CV joint located at the wheel hub. The outer constant velocity joint is particularly sophisticated, as it must transmit power smoothly while accommodating steering angles and suspension movement.

In addition to shafts and joints, ABS rings play a vital role in the Prelude's braking and safety systems. These rings are mounted on the CV joint and generate speed signals for the vehicle's ABS sensors. If a ring cracks or corrodes, the system loses the ability to read wheel speed correctly, compromising safety. The entire assembly is designed to be compact and efficient, yet it must endure heavy rotational torque alongside harsh environmental factors such as dirt, road salt, and moisture.

Common faults and symptoms

The most common sign of a failing outer CV joint on a Honda Prelude is a rhythmic clicking or knocking noise when cornering sharply, such as during parking manoeuvres or navigating tight junctions. This is frequently caused by a split CV boot, which allows lubricating grease to escape and abrasive dirt to enter the joint. Left unattended, the constant velocity joint can fail completely, resulting in total loss of drive.

Vibrations during acceleration are another frequent symptom, often traced to a worn inner CV joint on the Honda Prelude or an unbalanced driveshaft. Unlike outer joint issues, an inner joint failure usually presents as shuddering through the chassis rather than clicking when turning. Another typical fault on the Honda Prelude is an illuminated ABS warning light on the dashboard. This is commonly caused by a cracked or corroded ABS reluctor ring interfering with sensor readings. Identifying these symptoms early can save you from costly secondary repairs later on.

Common replacement parts for the Honda Prelude

Depending on mileage and driving conditions, certain components are ordered more regularly for the Honda Prelude. We have arranged our inventory to make finding the exact component straightforward. Here are the most frequently requested categories for this model:

  • Drive shafts for Honda Prelude – Multiple options available to cover different engine variants and model years.
  • Outer CV joints for Honda Prelude – Our largest segment, engineered for optimal precision.
  • Inner CV joints for Honda Prelude – A dedicated solution to eliminate vibration under acceleration.
  • ABS rings for Honda Prelude – Several variants to ensure your braking and safety systems operate flawlessly.

Replacing worn components with new parts from our range restores your car's original handling and drivability. We always advise inspecting the condition of the drive shaft boots regularly, as an intact boot provides the best protection to extend the working life of both inner and outer CV joints.

Finding the right part for your Honda Prelude

Navigate directly to the relevant subcategory for your Honda Prelude:

On a vehicle with several possible drivetrain issues, it pays to start in the correct category straight away. Comparing the exact component sections for the Honda Prelude makes it easier to distinguish between drive shaft, CV joint, or propeller shaft issues, allowing you to proceed to the page that best matches your symptoms and fitment needs.

Locating the correct replacement part for a Honda Prelude can occasionally be challenging, as specifications differ across generations and engine options, such as the popular 2.0-litre and 2.2 VTEC units. The most efficient way to start your search on cvjoint24.com is to select your car's make, model, and engine variant. Filtering by your exact vehicle configuration displays the components technically compatible with your car, reducing the risk of ordering incorrect parts and saving valuable workshop time.

While selecting your exact vehicle is very accurate, we also recommend checking the physical dimensions and spline counts on your existing part, especially on classic sports coupés where assemblies may have been swapped over the years. Our product listings provide detailed technical specifications for every Honda Prelude drive shaft and CV joint. If you need assistance confirming compatibility for your specific Prelude model, our knowledgeable customer support team is always ready to help.

Why choose CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, operating with a central warehouse in Helsingborg, Sweden, and delivering across the EU. We are not a generic car-parts retailer; we focus specifically on driveline systems. This dedicated focus means we possess in-depth technical expertise regarding every part we supply, offering guidance that generalist retailers rarely match. For Honda Prelude owners, this guarantees access to high-grade components that provide precise fitment and durability.

We combine deep technical insight with reliable EU-wide dispatch and a safe shopping experience. By supplying thoroughly tested, quality-assured parts, we help ensure your car drives safely on European roads year after year. Whether you are an enthusiast tackling repairs at home or a professional garage, partner with a specialist who understands your car's drivetrain needs and helps keep your Honda Prelude running at its best.

Frequently Asked Questions about Drivetrain Parts for Honda Prelude – Perfect-Fit Spare Parts

How do I know if my Honda Prelude needs a new outer CV joint?

The most common symptom is a clicking or knocking noise when turning sharply at low speeds. If the sound disappears when driving straight ahead but returns when cornering, it is a clear sign that the outer CV joint is worn.

Can I easily find the right drive shaft for my vehicle?

Yes, filtering by your Honda Prelude's make, model, year and engine variant is the most reliable way to select parts on cvjoint24.com. This ensures you find parts with the exact correct fitment.

Why does my Honda Prelude vibrate under acceleration?

Vibrations under acceleration are often caused by wear in the inner CV joint or an unbalanced drive shaft. If the vibrations stop as soon as you release the throttle, it strongly indicates that the fault lies within the drivetrain.

What causes the ABS warning light to illuminate on a Prelude?

A very common cause is a cracked or corroded ABS ring on the CV joint. This disrupts the sensor's ability to read the wheel speed, causing the system to trigger a fault code and illuminate the warning light.

Do you sell complete drive shafts for the Honda Prelude?

Yes, we currently offer 10 different variants of complete drive shafts for the Honda Prelude in our range, covering many of the most common model configurations.

Do I need to replace both CV joints at the same time?

No, it is not essential to replace both sides at once if only one is faulty. However, we do recommend inspecting the CV boot on the opposite side to make sure it is not also on the verge of failing.