Honda Shuttle

Spare parts and drivetrain components for the Honda Shuttle.

Products for Honda Shuttle

25 products
1 - 24 of 25
Item no.:0585236
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 64 mm
  • Outer splines: 28
  • ABS teeth: 50
Item no.:0509395
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 60 mm
  • Outer splines: 28
  • ABS teeth: 50
Item no.:0356531
  • Position: Front
  • ABS teeth: 50
  • Inner diameter: 91 mm
  • Outer diameter: 97,7 mm
  • Width: 9 mm
Item no.:0557619
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 60 mm
  • Outer splines: 28
  • ABS teeth: 50
Item no.:0682284
  • Outer diameter: 23 mm
  • Diameter: 91 mm
Item no.:0690450
Item no.:342321
  • Position: Front right, Inner
  • Inner splines: 32
  • Seal diameter: 40 mm
  • Total length: 58,5 mm
  • Joint diameter: 83 mm
Item no.:7317974
  • Position: Front, Outer
  • Inner splines: 32
  • Seal diameter: 64 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:0977418
  • Inner diameter: 40 mm
  • Outer diameter: 66 mm
Item no.:0699961
  • Total length: 84 mm
Item no.:0657520
  • Total length: 120 mm
Item no.:0939018
  • Inner diameter: 35 mm
  • Outer diameter: 56 mm
Item no.:0990921
  • Inner diameter: 42 mm
  • Outer diameter: 68 mm
Item no.:7306315
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 640 mm
  • Diameter 1: 92 mm
  • Diameter 2: 84 mm
Item no.:1135152
  • Position: Front left
  • Splines wheel side: 28
  • Joint diameter: 97 mm
  • ABS teeth: 50
Item no.:2142596
  • Position: Front right
  • Splines wheel side: 28
  • Joint diameter: 97 mm
  • ABS teeth: 50
Item no.:146020
  • Position: Inner
  • Inner splines: 30
  • Seal diameter: 35 mm
  • Total length: 62 mm
  • Joint diameter: 84 mm
Item no.:149376
  • Position: Inner
  • Inner splines: 30
  • Seal diameter: 35 mm
  • Total length: 54 mm
  • Joint diameter: 84 mm
Item no.:247825
  • Position: Inner
  • Inner splines: 32
  • Seal diameter: 40 mm
  • Total length: 152,5 mm
  • Joint diameter: 80 mm
Item no.:646014
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 35 mm
  • Total length: 53,5 mm
  • Joint diameter: 66 mm
Item no.:654431
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 55 mm
  • Outer splines: 23
  • ABS teeth: 50
Item no.:624228
  • Total length: 52 mm
  • Diameter: 20 mm
Showing 1–24 of 25 products

Drivetrain for Honda Shuttle

The Honda Shuttle is a versatile and spacious vehicle that relies on a well-functioning drivetrain to deliver the comfort and reliability owners expect. Power transmission is the heart of the car's movement, and for an estate like the Shuttle, it is vital that all components work together seamlessly, especially when carrying heavy loads or on longer journeys. As driveline specialists, we supply a range tailored to meet the exact technical demands of this model.

Maintaining the drivetrain is not just about replacing parts when they fail; it is about understanding how each component contributes to the whole. A well-maintained drivetrain reduces wear on both the engine and gearbox, extending the car's working life. We focus on providing high-quality car parts with an exact fit, which is crucial for preventing unwanted vibrations and mechanical issues down the road.

How the Honda Shuttle drivetrain is built

The drivetrain on a Honda Shuttle is engineered to transfer torque efficiently from the engine to the front wheels. The assembly comprises several critical components, including drive shafts fitted with both inner and outer CV joints. The outer CV joint sits closest to the wheel hub, allowing for both steering angles and suspension movement, whilst the inner CV joint is located near the gearbox to handle the axial plunge as the car travels over uneven surfaces.

Alongside the constant velocity joints, the ABS ring plays a vital role in the car's safety systems. Mounted directly onto the CV joint, it sends wheel speed signals to the ABS sensors. For the Honda Shuttle, precision engineering in these components is essential, as the slightest deviation can upset handling dynamics and electronic driver aids. Understanding this layout makes it much easier to identify the source of any mechanical fault.

Common faults and symptoms

There are several clear warning signs that the drivetrain on your Honda Shuttle is beginning to wear out. One of the most typical symptoms of a failing outer CV joint is a distinct clicking or knocking noise when cornering on full steering lock. This usually happens when grease escapes through a split CV boot, allowing moisture and road dirt to enter and wear down the joint's internal bearings.

If you experience vibrations through the steering wheel or throughout the cabin under acceleration, this frequently points to a worn inner CV joint. These vibrations occur when the joint can no longer distribute torque smoothly. Another common issue is the ABS warning light illuminating on the dashboard, often caused by a cracked or corroded ABS reluctor ring. Ignoring these symptoms can lead to costly repairs and, in the worst case, a complete breakdown on the road.

Common parts to replace on the Honda Shuttle

To keep your Honda Shuttle in peak condition, we have selected the most relevant spare parts based on the vehicle's specific requirements. Our range covers the primary wear items necessary to maintain smooth, quiet and vibration-free power delivery. The following categories are the most frequently required for this model:

  • Outer CV joints for Honda Shuttle – We stock multiple variants to match different model years and technical specifications.
  • Inner CV joints for Honda Shuttle – A critical component to cure vibrations felt under acceleration.
  • ABS rings for Honda Shuttle – Essential for ensuring your braking system and electronic safety features operate correctly.

By navigating to the right subcategory, you can be sure of finding a part that matches your car's exact mechanical specifications. We always advise inspecting the condition of your drive shaft boots whenever you check the CV joints, as an undamaged boot is the best insurance against premature joint failure.

Finding the right part for your Honda Shuttle

Navigate directly to the required component section for your Honda Shuttle:

On a vehicle where several drivetrain faults can display similar symptoms, starting in the right category saves time. Comparing the specific component sections for the Honda Shuttle makes it simpler to differentiate between drive shaft, CV joint or propeller shaft issues, leading you to the products that best match your symptoms and fitment.

Locating the correct replacement parts for a Honda Shuttle can occasionally present challenges due to variations across engine types and production years. The most reliable way to select the right part is to use our vehicle selector to filter by your car's make, model and engine variant. This ensures you only see components verified to fit your specific car, avoiding the hassle of ordering incorrect parts.

Once you have narrowed down the options, it is good practice to double-check key technical dimensions, such as the tooth count on the ABS ring or the spline count on the CV joint stub shaft. We provide clear, comprehensive technical details so you can order with absolute confidence. If you need any guidance selecting parts for your Honda Shuttle, our vehicle catalogue will point you in the right direction.

Why shop at CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, and our technical knowledge is your assurance of quality. Because we specialise exclusively in driveline and transmission components, we supply an extensive range that general car-parts retailers simply cannot match. For Honda Shuttle drivers across Europe, this means we not only have the right parts in stock, but also possess the technical expertise to guide you through fitment and avoid common pitfalls.

We insist on precise fitment and premium quality throughout our entire catalogue. When you buy from us, you receive components engineered to meet or exceed original equipment standards, shipped directly from our warehouse in Helsingborg, Sweden. With our dedicated focus on drivetrains, you can rely on getting the right components to keep your Honda Shuttle performing smoothly and safely for many miles to come.

Frequently Asked Questions about Honda Shuttle Drivetrain & Spare Parts

How do I know which outer CV joint fits my Honda Shuttle?

The easiest way is to use our vehicle selector to choose your car's make, model, and engine. As there are 4 different variants for the Honda Shuttle, selecting your exact model and engine filters the parts that are fully compatible with your car's specific engine and model year.

What are the most common signs of a failing CV joint on a Shuttle?

The most common symptoms are a clicking noise when taking sharp turns (outer CV joint) or noticeable vibrations throughout the car under acceleration (inner CV joint). If you see grease on the inside of the wheel rim, it is also a clear sign of a torn CV boot.

Why is the ABS warning light on in my Honda Shuttle?

A common cause is that the ABS ring on the CV joint has cracked or become heavily corroded, preventing the sensor from reading the signal correctly. We stock specific ABS rings for the Honda Shuttle that resolve this issue without requiring a complete drive shaft replacement.

Can I replace just the CV joint, or do I need to replace the entire drive shaft?

On the Honda Shuttle, you can easily replace just the outer or inner CV joint if the shaft itself is undamaged. This is often a much more economical solution than replacing the complete drive shaft.

Is it difficult to replace an ABS ring on the Honda Shuttle?

It requires removing the CV joint from the wheel hub. Once the joint is free, the old ring can be gently knocked off and the new one pressed or heat-shrunk into place. It is a straightforward repair that effectively restores ABS function.

How often should I check the drivetrain on my car?

We recommend inspecting the CV boots at every routine service or seasonal tyre change. An intact boot keeps dirt and moisture out of the joint, which is by far the best way to prevent expensive CV joint replacements.